We stock a large selection of Dixon Parts, Lawn Mower Parts, Lawn Mower Blades, Tractor parts, Chain Saw Parts, Manuals, Briggs & Stratton Parts, Briggs & Stratton Equipment, Echo Parts, Gator Blades, Go Kart Parts, Kohler Parts, Mini Bike Parts, Mini Chopper Parts, MTD Parts, Murray Parts, Tanaka Parts & Equipment, Tecumseh Parts, Shindaiwa Parts, Snapper Parts and Parts for most major Lawn Mower Manufacturers. For your convenience we have many illustrated parts diagrams.

Recommend This Page

Testimonials

It's nice to do business with good people like you.

Michael B.

Husqvarna Trimmer Heads

35 Husqvarna Trimmer Heads Found

We are an Authorized Husqvarna dealer carrying a large selection of Husqvarna Trimmer Heads. The following are the most commonly used Husqvarna Trimmer Heads. If you do not see the Husqvarna Trimmer Head you need, please complete the Lawn Mower Parts Request Form and we will be happy to assist you.

HUSQVARNA 502138702 TRIMMY-FIX M12

Two fixed-length lines. .080", .095", .105" and .130".

12 mm arbor, left-hand thread. Fits: 120L, 120R, 125L, 125LD, 125R, 125RJ, 132L, 132R, 132RJ, 235R, 240R, 245Rx, 250Rx, 252Rx and 265Rx.

No Longer Available

504044901

Internet Price: $46.95

HUSQVARNA 531003869 TRIMMY FIX M10

Two fixed-length lines. .080", .095", .105" and .130".

10 mm arbor, left-hand thread. Fits: 122L, 123L, 123LD, 225L, 225LD, 225R, 225RJ, 232L, 232R, 235RJx, 240L, 322L, 322R, 323L, 323LD, 323R, 323RJ, 324L, 324Lx, 324LDx, 324Rx, 325L, 325Lx, 325LDx, 325Rx, 325RDx, 325RJx, 326L, 326Lx, 326LDx, 326Rx, 326RJx

Internet Price: $29.95

HUSQVARNA 531006093 SUPER AUTO II TRIMMER HEAD/1"

Dual line head for straight-shaft trimmers. .080", .095" and .105".

Commercial use.

Flange (503 94 14-01) and nut (503 85 63-01) needed to mount on trimmer.

Put the bottom of the head on, then the flange and nut, and then snap the head on.

1" arbor. Fits: 123L, 123LD, 232L, 232R, 322L, 322R, 323L, 323LD, 323R, 323RJ, 324Lx, 324LDx, 324Rx, 325Lx, 325LDx, 325Rx, 325RDx, 325RJx, 326L, 326Lx, 326LDx, 326Rx, 326RJx.

Internet Price: $32.95

HUSQVARNA 531009224 S35 TRIMMER HEAD M10

Dual line, manually-fed trimmer head for straight-shaft trimmers. Holds line of: .080", .095", and .105". Commercial use. For 20-35 cc engine trimmers. Can be loaded 2 ways (both without any tools needed): 1) By taking it apart (very similar to the T35 head) and reloading the spool. 2) From the outside - you can reload it by having two fixed length lines and winding these into the spool.

10 mm arbor, left-hand thread. Fits: 122L, 123L, 123LD, 225L, 225LD, 225R, 225RJ, 232L, 232R, 235RJx, 240L, 322L, 322R, 323L, 323LD, 323R, 323RJ, 324Lx, 324LDx, 324Rx, 325Lx, 325LDx, 325Rx, 325RDx, 325RJx, 326L, 326Lx, 326LDx, 326Rx, 326RJx

Internet Price: $19.95

HUSQVARNA 531009268 S35 TRIMMER HEAD M12

Dual line, manually-fed trimmer head for straight-shaft trimmers. Holds line of: .080", .095", and .105". Commercial use. For 20-35 cc engine trimmers. Can be loaded 2 ways (both without any tools needed): 1) By taking it apart (very similar to the T35 head) and reloading the spool. 2) From the outside - you can reload it by having two fixed length lines and winding these into the spool.

12 mm arbor, left-hand thread. Fits: 120L, 120R, 125L, 125LD, 125R, 132L, 132R, 132RJ, 240R, 245Rx, 250Rx, 252Rx, 265Rx

Internet Price: $19.95

HUSQVARNA 531300371 T25 TRIMMER HEAD (IN CLAM)

Exclusively designed by Husqvarna, the T25 (for straight shafts) and T25C (for curved shafts) Professional Tap Advance trimmer heads feature an easy to reload spool that comes off with the cap, eliminating the need to turn the trimmer upside down to reload the line. The spool has a split design which reduces tangling and line welding, and has arrows to show the correct directional winding of the line to eliminate guesswork. The spool has two key slots to lock the trimmer line in and keep it from unwrapping while putting the cap back on the trimmer head. The T25 holds .065”, .080” or .095” trimmer line and comes pre-wound with .080" (T25C) or.095" (T25)TitaniumForce™ trimmer line.

T25- 10 mm arbor, Left-handed thread. Fits the following straight-shaft trimmers: 124L, 125L, and 125LDx.

Internet Price: $18.95

HUSQVARNA 531301123 T25 TRIM HEAD (CURVED) IN CLAM

Exclusively designed by Husqvarna, the T25 (for straight shafts) and T25C (for curved shafts) Professional Tap Advance trimmer heads feature an easy to reload spool that comes off with the cap, eliminating the need to turn the trimmer upside down to reload the line. The spool has a split design which reduces tangling and line welding, and has arrows to show the correct directional winding of the line to eliminate guesswork. The spool has two key slots to lock the trimmer line in and keep it from unwrapping while putting the cap back on the trimmer head. The T25 holds .065”, .080” or .095” trimmer line and comes pre-wound with .080" (T25C) or.095" (T25)TitaniumForce™ trimmer line.

T25C- 3/8" arbor, Right-hand thread. Fits the following curve-shaft trimmers: Mondo, 26LC, 32LC, 124C, 125C, 322C, 323C, 325C, 325Cx, and 326Cx.

Internet Price: $18.95

HUSQVARNA 537388101 T35 UNIVERSAL HEAD W/LINE (IN CLAM)

Exclusively designed by Husqvarna, the T35 Professional Tap Advance trimmer head features an easy to reload spool that comes off with the cap, eliminating the need to turn the trimmer upside down to reload the line. The spool has a split design which reduces tangling and line welding, and has arrows to show the correct directional winding of the line to eliminate guesswork. The spool has two key slots to lock the trimmer line in and keep it from unwrapping while putting the cap back on the trimmer head. The T35 holds .065", .080", .095", or .105" trimmer line and has a capacity of 28 feet of .095" gauge line, one of the best in the industry and comes pre-wound with .095" Titanium Force™ trimmer line.

Universal Version- 10 mm arbor, mutliple arbors. Fits most straight-shaft trimmers (Husqvarna, Stihl, Echo, Redmax, Shindaiwa and Poulan).

Internet Price: $26.95

HUSQVARNA 544909101 TRIMMER HEAD T55X (BALLBEARING

Exclusively designed by Husqvarna the T55X trimmer head features a semi-automatic cord feed system “Tap’n go“ and ball bearing resting surface.

Features developed for users with high demands on durability and minimized downtime.

The trimmer line is fed automatically when the head is pushed into the ground.

This means that the user always controls when the line is fed and the line can be fed while working with the machine.

Internet Price: $34.95

HUSQVARNA 544972601 T45X TRIMMER HEAD

Exclusively designed by Husqvarna, the T45 Professional Tap Advance trimmer head features a reinforced, ball bearing tap advance button.

It also features an easy to reload spool that comes off with the cap, eliminating the need to turn the trimmer upside down to reload the line.

The spool has a split design which reduces tangling and line welding, and has arrows to show the correct directional winding of the line to eliminate guesswork.

The spool has two key slots to lock the trimmer line in and keep it from unwrapping while putting the cap back on the trimmer head.

The T45 holds .095”, .105” or .130" trimmer line and comes standard with .105".

12mm arbor, left-hand thread.

FITS:

240R, 250R, 250Rx, 335L, 335Rx, 343R, 345Fx, 345Rx
and others

Internet Price: $31.95

OREGON 55-032-1 TRIMMER HEAD, BUMP FEED 2 LINE

REPLACES:

HUSQVARNA 26LC, 26RLC, 32LC, 32RLC, MONDO, 32L, 32RL, 32R, 32RL, 216CN, 23LC, 26LC, 26RLC, 32LC, 32RLC, MONDO
and others

Internet Price: $43.95

OREGON 55-035-1 TRIMMER HEAD, MINI BUMP 2 LINE

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
and others

Internet Price: $48.95

OREGON 55-036-1 TRIMMER HEAD, MINI BUMP 2 LINE

FITS:

HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
and others

Internet Price: $74.95

OREGON 55-067-1 TRIMMER HEAD, BUMP FEED 2 LINE

FITS:

HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
and others

Internet Price: $41.95

OREGON 55-080-1 TRIMMER HEAD, BUMP FEED 1 LINE

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
and others

Internet Price: $49.95

OREGON 55-081-1 TRIMMER HEAD, BUMP FEED 1 LINE

No Longer Available

OREGON 55-082-1 BUMP FEED 1 LINE TRIMMER HEAD

FITS:

HUSQVARNA 26LC, 26RLC, 32LC, 32RLC, MONDO, 32L, 32RL, 32R, 32RL, 216CN, 23LC, 26LC, 26RLC, 32LC, 32RLC, MONDO
and others

Internet Price: $47.95

OREGON 55-140-0 MAGNUM GATOR HEAD 4IN

Universal 4" Heavy Duty Magnum Gatorhead
• Pre-loaded with trimmer line
• Counterbore hardware
• Recess adapter bolts
• Recessed base
• Packaged in an attractive clamshell.

Includes: 8mm x 1.25 LHM & LHF, 10mm x 1.25 LHM & LHF, 10mm x 1.0 LHF 7mm x 1.0 LHM, 3/8-24 RHF Mounting Bolts

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
and others

Internet Price: $41.95

OREGON 55-264 TRIMMER HEAD, SPEED FEED CURVED SFT 375

3 3/4" Speed-Feed Trimmer Head (RH Spool)

Adapters Included: 8mm x 1.25 RHM and 3/8" – 24 RHF

Easy line loading takes 30 seconds or less. No disassembly required.

Simply slide line through head until half of amount to be added is on each side of the head, grasp the easy grip collar and wind line in.Rugged semi-matic head is designed for medium to heavy-duty applications.

Inner wall reduces debris inside the head and large durable eyelets increase line life. Line tensioning system with split spool reduces vibration.

Part numbers 55-294 and 55-265 mount on most straight shaft trimmers using 7mmx1.0 LH, 8mm x1.25LH and 10mm x 1.25LH adapters included.

Part number 55-264 fits many curved shaft trimmers using the included 8mm x1.25 RHM and 3/8-24 RHF adapters.

FITS:

HUSQVARNA 26LC, 26RLC, 32LC, 32RLC, MONDO, 32L, 32RL, 32R, 32RL, 216CN, 23LC, 26LC, 26RLC, 32LC, 32RLC, MONDO
and others

Internet Price: $38.95

OREGON 55-265 TRIMMER HEAD, SPEED FEED STRAIGHT 450

4 1/2" Speed-Feed Trimmer Head (LH Spool)

Adapters Included: 7MM x 1.0 LH, 8mm x 1.25 LH, 10MM x 125 LH

Easy line loading takes 30 seconds or less. No disassembly required.

Simply slide line through head until half of amount to be added is on each side of the head, grasp the easy grip collar and wind line in.

Rugged semi-matic head is designed for medium to heavy-duty applications.Inner wall reduces debris inside the head and large durable eyelets increase line life.

Line tensioning system with split spool reduces vibration.

Part numbers 55-294 and 55-265 mount on most straight shaft trimmers using 7mmx1.0 LH, 8mm x1.25LH and 10mm x 1.25LH adapters included.

Part number 55-264 fits many curved shaft trimmers using the included 8mm x1.25 RHM and 3/8-24 RHF adapters.

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
and others

Internet Price: $53.95

OREGON 55-284 TRIMMER HEAD BUMP FEED 2 LINE

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 24R (UP TO SER#603702)
and others

Internet Price: $35.95

OREGON 55-294 Speed Feed Trimmer Head

Easy loading of line takes 30 seconds or less. Not necessary to remove head or disassemble. Simply slide line through head until half of amount to be added is on each side of the head, grasp the easy grip collar and wind line in. Rugged semi-matic head is designed for medium to heavy-duty applications.Inner wall reduces the amount of debris inside the head and large durable eyelets increase line life. Line tensioning system with split spool reduces head vibration. Mounts on most straight shaft trimmers using 7mmx1.0 LHM, 8mm x1.25LHM and 10mm x 1.25LH thread using adapters included.

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
and others

Internet Price: $45.95

OREGON 55-403 TRIMMER HEAD ALUMINUM 2 LINE

2-Line Aluminum Jet-Fit Trimmer Head Use on trimmers 25cc or large

Jet-Fit heads are attached using the trimmers blade bolt or nut, and one adaptor from package.

NOTE: In Canada Jet-Fit Heads have been replaced with Flexihead Trimmer Heads. P/N 55-403 is Canadian P/N 55-407. P/N 55-404 is Canadian P/N 55-408

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 16R(AFTER 1986) , 18R, 18RL, 22R(AFTER 1986), 22RL, 25R(AFTER 1986), 25RL, 36R, 39R, 120L, 120R, 125L, 125LD, 125R, 125RD, 125RJ, 132L, 132LD, 132R, 132RD, 132RJ, 140R, 132R, 132RD, 132RJ, 140R, 165RX, 235R, 240R, 240RBD, 244R, 244RS, 245R, 245RX, 250RX, 252RX, 265RX, 165RX, 235R, 240R, 240RBD, 244R, 244X, 245R, 245RX, 265RX, 232L, 232LCAT, 32R, 225R, RD, 232R, 232RCAT, 235RCAT, 125L/LD/R/RB/RJD/, 165R, 165TX, 36R, 39R26R, 32L, 39R, 244R(EURO)
HUSQVARNA HUSKY 27GTS, 244R, 250RX322C, 325LX, 322L, 322R, 240RJ, 250R, 325RX
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 32L/P, 32LR, 32R, 32RLC, 21LCN, MONDO
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
HUSQVARNA 32R BEFORE 1987
and others

Internet Price: $41.95

OREGON 55-406-0 HEAD, KWIK LOADER FOR SHAPED LINE

Adaptors, bolts and nuts included to fit most trimmers

The Oregon Jet-Fit™ Express head features square eyelets making it an excellent choice for use with FlexiBlade.

Easy loading and unloading, just push to load and pull to unload
Square eyelets hold FlexiBlade™ securely, and at the right angle for maximum cutting force
Can be used with all sizes and shapes of line
Packaged in clamshells for easy display and easy sales

NOTE: In Canada this Jet-Fit™ Express Head has been replaced with Flexihead Trimmer Head P/N 55-409

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 16R(AFTER 1986) , 18R, 18RL, 22R(AFTER 1986), 22RL, 25R(AFTER 1986), 25RL, 36R, 39R, 120L, 120R, 125L, 125LD, 125R, 125RD, 125RJ, 132L, 132LD, 132R, 132RD, 132RJ, 140R, 132R, 132RD, 132RJ, 140R, 165RX, 235R, 240R, 240RBD, 244R, 244RS, 245R, 245RX, 250RX, 252RX, 265RX, 165RX, 235R, 240R, 240RBD, 244R, 244X, 245R, 245RX, 265RX, 232L, 232LCAT, 32R, 225R, RD, 232R, 232RCAT, 235RCAT, 125L/LD/R/RB/RJD/, 165R, 165TX, 36R, 39R26R, 32L, 39R, 244R(EURO)
HUSQVARNA HUSKY 27GTS, 244R, 250RX322C, 325LX, 322L, 322R, 240RJ, 250R, 325RX
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 26LC, 26RLC, 32LC, 32RLC, MONDO, 32L, 32RL, 32R, 32RL, 216CN, 23LC, 26LC, 26RLC, 32LC, 32RLC, MONDO
HUSQVARNA 32L/P, 32LR, 32R, 32RLC, 21LCN, MONDO
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
HUSQVARNA 32R BEFORE 1987
and others

Internet Price: $43.95

OREGON 55-413 HEAD, SWIFT LOADER COMPLETE CLAMSHELL

With no internal parts to break or misplace, the Swift Loader head is a great replacement option for most curved and straight shaft trimmers.

The 8" pre-cut line eliminates tangles and loads in seconds with no disassembly.

Uses .095” to .130” trimmer line of any shape.

Replaces Oregon Kwik Loader 55-401-0 and 55-406-0.

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 16R(AFTER 1986) , 18R, 18RL, 22R(AFTER '86), 22RL, 25R(AFTER 1986), 25RL, 36R, 39R, 120L, 120R, 125L, 125LD, 125R, 125RD, 125RJ, 132L, 132LD, 132R, 132RD, 132RJ, 140R, 132R, 132RD, 132RJ, 140R, 165RX, 235R, 240R, 240RBD, 244R, 244RS, 245R, 245RX, 250RX, 252RX, 265RX, 165RX, 235R, 240R, 240RBD, 244R, 244X, 245R, 245RX, 265RX, 232L, 232LCAT, 32R, 225R, RD, 232R, 232RCAT, 235RCAT, 125L/LD/R/RB/RJD/, 165R, 165TX, 36R, 39R26R, 32L, 39R, 244R(EURO)
HUSQVARNA HUSKY 27GTS, 244R, 250RX322C, 325LX, 322L, 322R, 240RJ, 250R, 325RX
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 26LC, 26RLC, 32LC, 32RLC, MONDO, 32L, 32RL, 32R, 32RL, 216CN, 23LC, 26LC, 26RLC, 32LC, 32RLC, MONDO
HUSQVARNA 32L/P, 32LR, 32R, 32RLC, 21LCN, MONDO
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
HUSQVARNA 32R BEFORE 1987
and others

Internet Price: $35.95

OREGON 55-490 PIVOTRIM CLASSIC TRIMMER HEAD

FIT 99% OF ALL GAS TRIMMERS
EASY TO LOAD AND INSTALL
USES LESS LINE
USES 0.95" LINE OR SMALLER
UP TO 8 LINES

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 16R(AFTER 1986) , 18R, 18RL, 22R(AFTER 1986), 22RL, 25R(AFTER 1986), 25RL, 36R, 39R, 120L, 120R, 125L, 125LD, 125R, 125RD, 125RJ, 132L, 132LD, 132R, 132RD, 132RJ, 140R, 132R, 132RD, 132RJ, 140R, 165RX, 235R, 240R, 240RBD, 244R, 244RS, 245R, 245RX, 250RX, 252RX, 265RX, 165RX, 235R, 240R, 240RBD, 244R, 244X, 245R, 245RX, 265RX, 232L, 232LCAT, 32R, 225R, RD, 232R, 232RCAT, 235RCAT, 125L/LD/R/RB/RJD/, 165R, 165TX, 36R, 39R26R, 32L, 39R, 244R(EURO)
HUSQVARNA HUSKY 27GTS, 244R, 250RX322C, 325LX, 322L, 322R, 240RJ, 250R, 325RX
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 26LC, 26RLC, 32LC, 32RLC, MONDO, 32L, 32RL, 32R, 32RL, 216CN, 23LC, 26LC, 26RLC, 32LC, 32RLC, MONDO
HUSQVARNA 32L/P, 32LR, 32R, 32RLC, 21LCN, MONDO
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
HUSQVARNA 32R BEFORE 1987
and others

Internet Price: $26.95

OREGON 55-491 PIVOTRIM PRO TRIMMER HEAD

FITS 99% OF STRAIGHT SHAFT GAS TRIMMERS
QUICK RELOADS AND USES LESS LINE
USES 0.105" LINE OR SMALLER
DESIGNED FOR PROFESSIONAL LANDSCAPERS

FITS:

HUSQVARNA (UP TO 1986) 16R, 22R, 24R, 25RL
HUSQVARNA 16R(AFTER 1986) , 18R, 18RL, 22R(AFTER 1986), 22RL, 25R(AFTER 1986), 25RL, 36R, 39R, 120L, 120R, 125L, 125LD, 125R, 125RD, 125RJ, 132L, 132LD, 132R, 132RD, 132RJ, 140R, 132R, 132RD, 132RJ, 140R, 165RX, 235R, 240R, 240RBD, 244R, 244RS, 245R, 245RX, 250RX, 252RX, 265RX, 165RX, 235R, 240R, 240RBD, 244R, 244X, 245R, 245RX, 265RX, 232L, 232LCAT, 32R, 225R, RD, 232R, 232RCAT, 235RCAT, 125L/LD/R/RB/RJD/, 165R, 165TX, 36R, 39R26R, 32L, 39R, 244R(EURO)
HUSQVARNA HUSKY 27GTS, 244R, 250RX322C, 325LX, 322L, 322R, 240RJ, 250R, 325RX
HUSQVARNA 24R (UP TO SER#603702)
HUSQVARNA 26LC, 26RLC, 32LC, 32RLC, MONDO, 32L, 32RL, 32R, 32RL, 216CN, 23LC, 26LC, 26RLC, 32LC, 32RLC, MONDO
HUSQVARNA 32L/P, 32LR, 32R, 32RLC, 21LCN, MONDO
HUSQVARNA 122L,125L, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 232R, 322L, 322R, 324LX, 325LX, 325R, 326LS, 326LX, 335LS
HUSQVARNA 32R BEFORE 1987
and others

Internet Price: $37.95

HUSQVARNA 695000349 TRIMMY HIT PRO M12

Dual line head for straight-shaft trimmers. For professional use.

12mm arbor, left-hand thread. Fits: 120L, 120R, 132L, 132R, 132RJ, 235R, 240R, 245Rx, 250RX, 252Rx, and 265Rx

Internet Price: $22.95

HUSQVARNA 695000376 TRIMMY HIT W-3/8-24 LHT ARBOR

Dual line head for straight-shaft trimmers. .080", .095" and .105".

Fits Mondo Max and Mondo Mega

Internet Price: $21.95

HUSQVARNA 695000394 TRIMMY HIT JR-5/16

Dual line head for curved shaft trimmers. .080" and .095".

5/16" arbor, right-handed thread. Fits 21LCN and 23LC.

Internet Price: $18.95

HUSQVARNA 695000824 TRIMMY HIT JR W/CLAMSHELL

Dual line head for curved shaft trimmers. .080" and .095".

3/8" arbor, right-handed thread. Fits: Mondo, 26LC, 32LC, 125C, 322C, 323C, 325C, 325Cx, and 326Cx

Internet Price: $19.95

HUSQVARNA 695000825 TRIMMY HIT W/ CLAMSHELL

Dual line head for straight-shaft trimmers. .080", .095" and .105".

10mm arbor, left-hand thread. 122L, 125L, 125LD, 125R, 125RJ, 225L, 225LD, 225R, 225RJ, 232L, 232R, 235RJx, 240L, 322L, 323L, 325Lx, 326Lx, 322R, 323R, 325Rx, and 326Rx. Clamshell Packaged.

Internet Price: $22.95

HUSQVARNA 695000826 TRIMMY HIT PRO W/ CLAMSHELL

Dual line head for straight-shaft trimmers. For professional use.

10mm arbor, left-hand thread. Fits: 122L, 125L, 125LD, 125R, 125RJ, 225L, 225LD, 225R, 225RJ, 232L, 232R, 235RJx, 240L, 322L, 323L, 325Lx, 326Lx, 322R, 323R, 325Rx, and 326Rx. Clamshell packaged.

Internet Price: $23.95

HUSQVARNA 695000834 TRIMMY HIT 12MM LH

Dual line head for straight-shaft trimmers. .080", .095" and .105".

12mm arbor, left-hand thread. Fits: 120L, 120R, 132L, 132R, 132RJ, 235R, 240R, 245Rx, 250Rx, 252Rx, and 265Rx

Internet Price: $21.95

Showing 35 Products

Looking for Something?

Top Categories

Customer Service

Shipping & Return

Company Info

Live Chat
FAQs
Advice Center
Order Status
Email Preferences

Policies & Procedures