Shindaiwa Trimmer Heads
|
59 Shindaiwa Trimmer Heads Found
|
|
 |
We are an Authorized Shindaiwa dealer carrying a large selection of
Shindaiwa Trimmer Heads. The following are the most commonly used
Shindaiwa Trimmer Heads. If you do not see the
Shindaiwa Trimmer Head you need,
please complete the Lawn Mower
Parts Request Form
and we will be happy to assist you.
|
|
|
|
|
 |
|
SHINDAIWA 28820-08000 SPEED-FEED TRIMMER HEAD CLAMSHELL WITH 7MM LH, 8MM LH, & 10MM LH STUDS
• Reload trimmer line in 30 seconds or less!
• Easy to load, no disassembling of head required when loading trimmer line.
• Rugged, reliable semi-automatic head for medium- to heavy-duty applications.
• Index line by tapping the bottom of the head on the ground.
• Smooth bottom enables the head to glide along the ground.
• Head is pre-wound with 2.4 mm Silentwist® trimmer line.
Clamshell with 7 mm, 8 mm, and 10 mm
arbor bolts: fits all Shindaiwa straight-shaft
trimmers
SHINDAIWA SPEED-FEED 450 TRIMMER HEAD, 4.5 INCH DIAMETER. HOLDS APPROXIMATELY 25 FT OF .095 DIAMETER LINE. INCLUDES ADAPTERS FOR ALL SHINDAIWA STRAIGHT-SHAFT MODELS. 7mm LH, 8mm LH AND 10mm LH.
|
|
Internet Price: $36.95
|
 |
|
SHINDAIWA 28820-08001 Speed-Feed 450 Trimmer Head (bulk pack)
Ideal for larger displacement units (above 25cc) and fits all straight shaft Shindaiwa trimmers and brushcutters and has adapter hardware included to fit-up with most major competitive models.
Bulk Pack carton (24 heads) with 7mm, 8mm, and 10 mm arbor bolts.
|
|
Internet Price: $599.95
|
 |
|
SHINDAIWA 28820-11000 SPEED-FEED TRIMMER HEAD W/ 8MM LH ARBOR
• Reload trimmer line in 30 seconds or less!
• Easy to load, no disassembling of head required when loading trimmer line.
• Rugged, reliable semi-automatic head for medium- to heavy-duty applications.
• Index line by tapping the bottom of the head on the ground.
• Smooth bottom enables the head to glide along the ground.
• Head is pre-wound with 2.4 mm Silentwist® trimmer line.
with 8 mm arbor bolt: fits T260, T300, T3410,
T350, C260, C300, C3410, BP45, BP530
|
|
No Longer Available
Replaced by 28820-08000
|
|
|
SHINDAIWA 28820-11000B SPEED-FEED 450 8MM LH TRIMMER HEAD BULK
• Reload trimmer line in 30 seconds or less!
• Easy to load, no disassembling of head required when loading trimmer line.
• Rugged, reliable semi-automatic head for medium- to heavy-duty applications.
• Index line by tapping the bottom of the head on the ground.
• Smooth bottom enables the head to glide along the ground.
• Head is pre-wound with 2.4 mm Silentwist® trimmer line.
with 8 mm arbor bolt: fits T260, T300, T3410, T350, C260, C300, C3410, BP45, BP530
|
|
No Longer Available
Replaced by 28820-11000
|
 |
|
SHINDAIWA 28820-12000 SPEED-FEED TRIMMER HEAD W 10MM LH ARBOR
• Reload trimmer line in 30 seconds or less!
• Easy to load, no disassembling of head required when loading trimmer line.
• Rugged, reliable semi-automatic head for medium- to heavy-duty applications.
• Index line by tapping the bottom of the head on the ground.
• Smooth bottom enables the head to glide along the ground.
• Head is pre-wound with 2.4 mm Silentwist trimmer line.
with 8 mm arbor bolt: fits T260, T300, T3410,
T350, C260, C300, C3410, BP45, BP530
|
|
No Longer Available
Replaced by 28820-08000
|
 |
|
STENS 385-150 PRO BUMP FEED TRIMMER HEAD
• Arbor sizes included:
• 7mm x 1.00 LHM
• 8mm x 1.25 LHM
• 10mm x 1.00LHF
• 10mm x 1.25 LHF
• Ideal for consumer and commercial use
• Recommended for trimmers under 30cc
• Single spool allows for single or dual line indexing
• Uses .080", .095" or .105" diameter line
• Spool holds 20 FT of .095" diameter line
• Uses our 385-892 Trimmer Head Spool
• Uses our 385-204 Trimmer Head Spring
FITS:
- SHINDAIWA BP35, BP45, C25, C27, C250, F20, R20, R25, R35, T25, T250, T260, T27, T270, T350, YARDWARE220, C20, C230, LT18, LT20, T18, T20, T20A,T35, T230 and T230XR
- and others
|
|
Internet Price: $39.95
|
 |
|
STENS 385-154 BUMP FEED HEAD
• Arbor sizes included:
• 7mm x 1.00 LHM
• 8mm x 1.25 LHM
• 8mm x 1.25 LHF
• 10mm x 1.25 LHF
• 10mm x 1.00 LHF
• Ideal for consumer and commercial use
• Recommended for trimmers under 25cc
• Single spool allows for single or dual line indexing
• Uses .080", .095" or .105" diameter line
• Spool holds 20 FT of .095" diameter line
• Universal cam assembly requires less parts, allows for easier head assembly
• Uses our 385-888 Trimmer Head Spool
• Uses our 385-204 Trimmer Head Spring
FITS:
- SHINDAIWA T20, T20A, T35, C20, C230, LT20, T230, T230XR, LT18, T18, PB25, PB45, C25, C250, C27, F20,R20, R25, R35, T25, T250, T260, T27, T270, T350, VP35, B40, B45, C35, RC45
- and others
|
|
Internet Price: $34.95
|
 |
|
STENS 385-284 Trimmer Head
Recommended for straight shaft trimmers
Arbor sizes included:
• 10mm x 1.25 LHF
• 10mm x 1.00 LHF
• 8mm x 1.25 LHF
• 7mm x 1.00 LHM
• 8mm x 1.25 LHM
• Ideal for consumer use
• Spool holds about 10 feet of .095" line
• Uses .080", .095" or .105" diameter line
• Inner wall reduces amount of dirt inside head
• Large, durable, split eyelets enhance line life
• Smooth and durable, the large bottom cover taps on ground to advance line and allows head to glide while trimming
• Easy to feed line
• Uses our 385-108 Trimmer Head Cover
• Uses our 385-058 Trimmer Head Spring Cap
• Uses our 385-096 Adapter - Redmax
• Uses our 385-070 Trimmer Head Eyelet
• Uses our 385-062 Trimmer Head Spring
REPLACES:
- SHINDAIWA 78890-11000
- SHINDAIWA 78890-18000
- and others
FITS:
- SHINDAIWA TR195s and 22T
- and others
|
|
Internet Price: $42.95
|
 |
|
STENS 385-285 Trimmer Head
Recommended for curved shaft trimmers
Arbor sizes included:
• 3/8"-24 RHF
• 8mm x 1.25 RHM
• Ideal for consumer use
• Spool holds about 10 feet of .095" line
• Uses .080", .095" or .105" diameter line
• Inner wall reduces amount of dirt inside head
• Large, durable, split eyelets enhance line life
• Smooth and durable, the large bottom cover taps on ground to advance line and allows head to glide while trimming
• Easy to feed line
• Uses our 385-058 Trimmer Head Spring Cap
• Uses our 385-070 Trimmer Head Eyelet
• Uses our 385-062 Trimmer Head Spring
REPLACES:
- SHINDAIWA 78890-19000
- and others
|
|
No Longer Available
|
 |
|
STENS 385-288 Trimmer Head
Recommended for straight shaft trimmers
Arbor sizes included:
• 10mm x 1.25 LHF
• 10mm x 1.00 LHF
• 8mm x 1.25 LHF
• 7mm x 1.00 LHM
• 8mm x 1.25 LHM
• Ideal for consumer use
• Spool holds about 20 feet of .095" line
• Uses .080", .095" or .105" diameter line
• Inner wall reduces amount of dirt inside head
• Large, durable eyelets enhance line life
• Smooth and durable, the large bottom cover taps on ground to advance line and allows head to glide while trimming
• Uses our 385-074 Trimmer Head Cover
• Uses our 385-058 Trimmer Head Spring Cap
• Uses our 385-096 Adapter - Redmax
• Uses our 385-070 Trimmer Head Eyelet
• Uses our 385-062 Trimmer Head Spring
REPLACES:
- SHINDAIWA 28820-08000
- SHINDAIWA 78890-21000
- and others
FITS:
- SHINDAIWA 22T, TR195s, LT18, T18, LT20, C20, T20, C230, M230, M231, T230, T231, T232, C25, C2510, M2500, M2510, T25, T250, T2500, T2510, T2510X,C260, T260, T261, C27, C270, T27, T270, T272X, T3410, T3410X, BP35, C35, C350, T350, B45,B450 and RC45
- and others
|
|
Internet Price: $48.95
|
 |
|
STENS 385-730 BUMP FEED TRIMMER HEAD
4" trimmer head
Arbor sizes included:
• 7mm x 1.00 LHM
• 8mm x 1.25 LHF
• 8mm x 1.25 LHM
• 10mm x 1.25 LHF
• 10mm x 1.25 LHM
• 10mm x 1.00 LHF
• 3/8"-24 RHF
• Ideal for commercial use
• Uses our 385-738 Trimmer Head Spool
• Uses our 385-756 Trimmer Head Spring
• Uses our 385-752 Trimmer Head Cover
REPLACES:
- SHINDAIWA 80401
- and others
|
|
Internet Price: $45.95
|
 |
|
STENS 385-734 BUMP FEED TRIMMER HEAD
6" trimmer head
Arbor sizes included:
• 7mm x 1.00 LHM
8mm x 1.25 LHF
• • 8mm x 1.25 LHM
• 10mm x 1.25 LHF
• 10mm x 1.25 LHM
• 10mm x 1.00 LHF
• Ideal for commercial use
• Uses our 385-756 Trimmer Head Spring
• Uses our 385-761 Trimmer Head Cover
• Uses our 385-769 Trimmer Head Spool
REPLACES:
- SHINDAIWA 80403
- and others
|
|
Internet Price: $73.95
|
 |
|
STENS 385-744 FLAIL TRIMMER HEAD
Fits straight shaft trimmers
For 1" and 20mm arbors
Easy to install by using brush blade hardware
Uses our 390-039 blades
Made in Germany
Can also be used as fixed line head
6 1/4" head diameter
12" cutting diameter
Uses our 390-039 Nylon Trimmer Blade
REPLACES:
- SHINDAIWA 99906-1566
- and others
|
|
Internet Price: $45.95
|
 |
|
OREGON 55-035-1 MINI BUMP 2 LINE TRIMMER HEAD
FITS:
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- and others
|
|
Internet Price: $50.95
|
 |
|
OREGON 55-080-1 TRIMMER HEAD, BUMP FEED 1 LINE
FITS:
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- and others
|
|
Internet Price: $49.95
|
 |
|
OREGON 55-140-0 4-INCH MAGNUM GATOR TRIMMER HEAD
Universal 4" Heavy Duty Magnum Gatorhead
• Pre-loaded with trimmer line
• Counterbore hardware
• Recess adapter bolts
• Recessed base
• Packaged in an attractive clamshell.
Includes: 8mm x 1.25 LHM & LHF, 10mm x 1.25 LHM & LHF, 10mm x 1.0 LHF
7mm x 1.0 LHM, 3/8-24 RHF Mounting Bolts
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- and others
|
|
Internet Price: $43.95
|
 |
|
OREGON 55-264 TRIMMER HEAD, SPEED FEED CURVED SHAFT 375
3 3/4" Speed-Feed Trimmer Head (RH Spool)
Adapters Included: 8mm x 1.25 RHM and 3/8" – 24 RHF
Easy line loading takes 30 seconds or less. No disassembly required.
Simply slide line through head until half of amount to be added is on each side of the head, grasp the easy grip collar and wind line in.Rugged semi-matic head is designed for medium to heavy-duty applications.
Inner wall reduces debris inside the head and large durable eyelets increase line life. Line tensioning system with split spool reduces vibration.
Part numbers 55-294 and 55-265 mount on most straight shaft trimmers using 7mmx1.0 LH, 8mm x1.25LH and 10mm x 1.25LH adapters included.
Part number 55-264 fits many curved shaft trimmers using the included 8mm x1.25 RHM and 3/8-24 RHF adapters.
|
|
Internet Price: $36.95
|
|
|
OREGON 55-265 TRIMMER HEAD, SPEED FEED STRAIGHT 450
4 1/2" Speed-Feed Trimmer Head (LH Spool)
Adapters Included: 7MM x 1.0 LH, 8mm x 1.25 LH, 10MM x 125 LH
Easy line loading takes 30 seconds or less. No disassembly required.
Simply slide line through head until half of amount to be added is on each side of the head, grasp the easy grip collar and wind line in.
Rugged semi-matic head is designed for medium to heavy-duty applications.Inner wall reduces debris inside the head and large durable eyelets increase line life.
Line tensioning system with split spool reduces vibration.
Part numbers 55-294 and 55-265 mount on most straight shaft trimmers using 7mmx1.0 LH, 8mm x1.25LH and 10mm x 1.25LH adapters included.
Part number 55-264 fits many curved shaft trimmers using the included 8mm x1.25 RHM and 3/8-24 RHF adapters.
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- SHINDAIWA F-18, F-20, F-21, F-22, F-230, F195
- and others
|
|
Internet Price: $50.95
|
 |
|
OREGON 55-284 TRIMMER HEAD BUMP FEED 2 LINE
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- and others
|
|
Internet Price: $31.95
|
|
|
OREGON 55-294 Speed Feed Trimmer Head
Easy loading of line takes 30 seconds or less. Not necessary to remove head or disassemble. Simply slide line through head
until half of amount to be added is on each side of the head, grasp the easy grip collar and wind line in.
Rugged semi-matic head is designed for medium to heavy-duty applications.Inner wall reduces the amount of debris inside the head and large
durable eyelets increase line life. Line tensioning system with split spool reduces head vibration. Mounts on most straight
shaft trimmers using 7mmx1.0 LHM, 8mm x1.25LHM and 10mm x 1.25LH thread using adapters included.
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- SHINDAIWA F-18, F-20, F-21, F-22, F-230, F195
- and others
|
|
Internet Price: $43.95
|
 |
|
OREGON 55-403 TRIMMER HEAD ALUMINUM 2 LINE
2-Line Aluminum Jet-Fit Trimmer Head Use on trimmers 25cc or large
Jet-Fit heads are attached using the trimmers blade bolt or nut,
and one adaptor from package.
NOTE: In Canada Jet-Fit Heads have been replaced with Flexihead
Trimmer Heads. P/N 55-403 is Canadian P/N 55-407. P/N
55-404 is Canadian P/N 55-408
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- and others
|
|
Internet Price: $42.95
|
 |
|
OREGON 55-406-0 HEAD, KWIK LOADER FOR SHAPED LINE
Adaptors, bolts and nuts included to fit most trimmers
The Oregon Jet-Fit™ Express head features square eyelets
making it an excellent choice for use with FlexiBlade.
- Easy loading and unloading, just push to load and pull to unload
- Square eyelets hold FlexiBlade™ securely, and at the right angle for maximum
cutting force
- Can be used with all sizes and shapes of line
- Packaged in clamshells for easy display and easy sales
NOTE: In Canada this Jet-Fit™ Express Head has been replaced with Flexihead
Trimmer Head P/N 55-409
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- SHINDAIWA F-18, F-20, F-21, F-22, F-230, F195
- and others
|
|
Internet Price: $44.95
|
 |
|
OREGON 55-413 SWIFT LOADER TRIMMER HEAD, COMPLETE CLAMSHELL
With no internal parts to break or misplace, the Swift Loader
head is a great replacement option for most curved and straight
shaft trimmers.
The 8" pre-cut line eliminates tangles and loads in
seconds with no disassembly.
Uses .095” to .130” trimmer line of any shape.
Replaces Oregon Kwik Loader 55-401-0 and 55-406-0.
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- SHINDAIWA F-18, F-20, F-21, F-22, F-230, F195
- and others
|
|
Internet Price: $36.95
|
 |
|
OREGON 55-490 PIVOTRIM CLASSIC TRIMMER HEAD
- FIT 99% OF ALL GAS TRIMMERS
- EASY TO LOAD AND INSTALL
- USES LESS LINE
- USES 0.95" LINE OR SMALLER
- UP TO 8 LINES
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- SHINDAIWA F-18, F-20, F-21, F-22, F-230, F195
- and others
|
|
Internet Price: $27.95
|
 |
|
OREGON 55-491 PIVOTRIM PRO TRIMMER HEAD
- FITS 99% OF STRAIGHT SHAFT GAS TRIMMERS
- QUICK RELOADS AND USES LESS LINE
- USES 0.105" LINE OR SMALLER
- DESIGNED FOR PROFESSIONAL LANDSCAPERS
FITS:
- SHINDAIWA LT18, T18, LT20, C20, T20, T20A, T35, T230, T230S, T230XR, C230, DYB201/202/231/232, T23E, T195, T220, T222, T242, T242X, T2510X
- SHINDAIWA BP-35, BP-45, C-25, C-27, C250, F-20, R-20, R-25, R-35, T-25, T-27, T-250, T-260, T261, T261B, T261XR, T261XB, T-270, T272, T272X, T282, T282X, T300, T3410, T3410X, T-350, YARDWARE220, VP35, DYB251/252/254/261, DYB321/322, F18, F20, F230, P18, P21, C23
- SHINDAIWA B35, BP35, B40, B45, B450, BP45, RC45, C35, T350, DYB351/453/454
- SHINDAIWA F-18, F-20, F-21, F-22, F-230, F195
- and others
|
|
Internet Price: $38.95
|
 |
|
SHINDAIWA 78890-11000 SPEED-FEED 375 LH TRIMMER HEAD, CLAMSHELL
GENUINE SHINDAIWA 78890-14000 SPEED-FEED 375 TRIMMER HEAD, 3.75 INCH DIAMETER. HOLDS APPROXIMATELY 16 FT OF .095 DIAMETER TRIMMER LINE. INCLUDES ADAPETERS FOR MOST SHINDAIWA STRAIGHT SHAFT MODELS. INCLUDES 7mm LH AND 8mm LH ADAPTERS.
|
|
Internet Price: $29.95
|
 |
|
SHINDAIWA 78890-12000 SPEED-FEED 375 7MM LH TRIMMER HEAD
• Reload trimmer line in 30 seconds or less!
• Easy to load, no disassembling of head required when loading trimmer line.
• Rugged, reliable semi-automatic head for medium- to heavy-duty applications.
• Index line by tapping the bottom of the head on the ground.
• Smooth bottom enables the head to glide along the ground.
• Head is pre-wound with 2.4 mm Silentwist® trimmer line.
7mm Arbor bolt Mini Speed Feed: fits T220, T230s, T2510, C220, C230s, C2510, T242, C242
|
|
No Longer Available
|
|
|
SHINDAIWA 78890-12000B SPEED-FEED 375 7MM LH TRIMMER HEAD, BULK
• Reload trimmer line in 30 seconds or less!
• Easy to load, no disassembling of head required when loading trimmer line.
• Rugged, reliable semi-automatic head for medium- to heavy-duty applications.
• Index line by tapping the bottom of the head on the ground.
• Smooth bottom enables the head to glide along the ground.
• Head is pre-wound with 2.4 mm Silentwist® trimmer line.
7mm Arbor bolt Mini Speed Feed: fits T220,
T230s, T2510, C220, C230s, C2510, T242, C242
|
|
No Longer Available
|
 |
|
SHINDAIWA 80402 PRO 4 INCH SEMI-MATIC TRIMMER HEAD IN PACKAGE
Rugged, reliable, semi-automatic head for medium to heavy-duty applications.
Easy to use, with tap-to-advance line extension.
Made of tough, high-impact nylon.
Easy to load, simple to use: no small parts to lose.
Comes with a double-ended arbor adapter, 7mm thread on one end, 8mm on the other.
Fits 22T, T230, T231, T2500, T2510, T2510X, C230, M230, M231, M2500, T260, T261, T270, T272X, T350, T3410X, C260 and C270.
|
|
No Longer Available
|
 |
|
SHINDAIWA 80404 PRO 6 SEMI-MATIC TRIMMER HEAD IN PACKAGE
Semi-automatic head for medium to heavy-duty applications.
Tried and true design.
Index line by tapping knob on the ground.
Made of tough, high-impact nylon.
Reliable; easy to load, simple to use; no small parts.
Comes with a double-ended arbor adapter, 8mm thread on one end, 10mm on the other.
Fits T260, T261, T270, T272X, T350, T3410X, C260, C270, C350 and B450
|
|
No Longer Available
|
 |
|
SHINDAIWA 80423 HOMEPRO SEMI-MATIC IN PACKAGE, REPLACED BY 78890-11000
Shindaiwa 80423 3.75-inch HomePro Trimmer Head
Easy-to-use, semi-automatic trimmer head designed for HomePro and other trimmers. Not intended for professional applications.
Fits on curved-shaft as well as straight-shaft trimmers.
Very simple design; easy to load and operate.
Made of glass-filled, high-impact nylon to resist wear and abrasion.
No little parts to misplace.
Comes with one double-ended arbor; 8mm RH thread on one end, 7mm LH thread on the other.
Fits 22F, 22T, F195s, T195s, F230, T230, T231, T2500, C230, M230, M231, M2500 and M2510.
|
|
No Longer Available
|
 |
|
SHINDAIWA 80794A HEAVY DUTY FIXED LINE TRIMMER HEAD
Cast metal fixed line head is designed for use in the most demanding applications.
Can be used in either 2-line or 4-line configuration, with up to .155" line.
Includes hardware for mounting on all current Shidnaiwa trimmers.
|
|
Internet Price: $36.95
|
 |
|
SHINDAIWA 99909-1566 SUPER FLAIL TRIMMER HEAD
Designed for heavy-duty applications.
Tough, durable, high-impact nylon; less hazardous than steel.
Blades mounted with steel bearings.
Blades change easily with Allen wrenches (included).
Universal mount with adapter; fits most trimmers and brushcutters.
Fits all Shindaiwa straight-shaft units
|
|
No Longer Available
|
 |
|
SHINDAIWA UN30 SEMI-MATIC TRIMMER HEAD, REPLACES 99909-15500,99909-15600
Low profile, high capacity, all nylon; medium to heavy-duty appications.
Line retracts easily when too much is extended.
Superior balance for smooth running, reduced operator fatigue.
Easy disassembly speeds reloads.
Package contains 7mm, 8mm and 10mm arbors.
Fits 22T, F195s, F230, T230, T231, T2500, T2510, C230, M230, M231, M2500, M2510, T260, T261, T270, T272X, T350, C260, C270 and T3410X
|
|
No Longer Available
|
|
|
Shindaiwa is a leading
manufacturer of professional-quality outdoor power equipment, including
trimmers and
edgers,
brushcutters,
chain
saws,
hedge
trimmers,
blowers,
spreaders,
sprayers,
cut-off
saws,
PowerBrooms, and models featuring the
revolutionary C4 Technology.
Shindaiwa
products represent the latest in 2-cycle and micro 4-cycle engine
technologies, reflected by outstanding power-to-weight ratios and
features that promote longer unit life, quieter operation and reduced
exhaust emission. |
 |
