Shop by Phone: 1-866-563-9925 (Toll Free)
Lawn Mower Parts and Equipment Since 1982!

Stens Aftermarket Lawn Mower Parts

Search for Stens Aftermarket Lawn Mower Parts

We are an carry a large selection of Stens Aftermarket Parts ready to ship direct to your door. The following are the most popular Stens Aftermarket Parts. If you do not see the Stens Aftermarket Part you need, please complete the Lawn Mower Parts Request Form and we will be happy to assist you.

8531 Stens Aftermarket Lawn Mower Parts Found

STENS 030-007 GAS FLANGED PUMP

  STENS 030-007 GAS FLANGED PUMP

Bore:0.591 "
Stroke:0.256 "

REPLACES:
  • GENERAL PUMP TC1506GUI
  • and others
•Gallons Per Minute:2.6
•Pounds Per Square Inch:2,700
•RPM:3,400
•GHP:7.21
•TC Series 60
•Triplex plunger pump
•Compact design
•3/4" hollow shaft
•Flanged for direct couple to gasoline engines
•SAE J609A
•Premium built-in trapped pressure unloader on left side of manifold with an exclusive lifetime warranty
•Maximum inlet pressure 125 PSI
•Maximum fluid temperature 165� F.
•Inlet port thread 1/2"-14 BSP-F
•Discharge port thread 3/8"-19 BSP-F
•Gauge port 1/8" maximum inlet required
•Flooded pump dimesions 10.4" x 8" x 7.7"
•Crankcase oil capacity 11.8 oz.
•Type:Gas Flanged

  Price: $548.95


STENS 030-011 GAS FLANGED PUMP

  STENS 030-011 GAS FLANGED PUMP

Bore:0.591 "
Stroke:0.315 "

REPLACES:
  • GENERAL PUMP TX1508G8UI
  • and others
•Gallons Per Minute:3.0
•Pounds Per Square Inch:3,000
•RPM:3,400
•GHP:9.2
•TX Series 63
•Triplex plunger pump
•Built-in unloader and downstream injector on left side of manifold
•1" hollow shaft
•Flanged for direct couple to gasoline engines
•SAE J609B
•Large, lightweight connecting rods
•New long life low and high pressure seals
•Forged brass manifold with exclusive lifetime warranty
•Maximum inlet pressure 125 PSI
•Maximum fluid temperature 165� F.
•Inlet port thread 1/2"-14 BSP-F
•Discharge port thread 3/8"-19 BSP-F
•Pump dimensions 8.4" x 8.3" x 4.8"
•Maximum inlet required, flooded
•Crankcase oil capacity 14 oz.
•Type:Gas Flanged

  Price: $579.95


STENS 030-015 GAS FLANGED PUMP

  STENS 030-015 GAS FLANGED PUMP

Bore:0.591 "
Stroke:0.394 "

REPLACES:
  • GENERAL PUMP TX1510G8UI
  • and others
•Gallons Per Minute:4.0
•Pounds Per Square Inch:3,000
•RPM:3,400
•GHP:12.3
•TX Series 63
•Triplex plunger pump
•Built-in unloader and downstream injector on left side of manifold
•1" hollow shaft
•Flanged for direct couple to gasoline engines
•SAE J609B
•Large, lightweight connecting rods
•New long life low and high pressure seals
•Forged brass manifold with exclusive lifetime warranty
•Maximum inlet pressure 125 PSI
•Maximum fluid temperature 165� F.
•Inlet port thread 1/2"-14 BSP-F
•Discharge port thread 3/8"-19 BSP-F
•Pump dimensions 8.4" x 8.3" x 4.8"
•Maximum inlet required, flooded
•Crankcase oil capacity 14 oz.
•Type:Gas Flanged

  Price: $579.95


STENS 030-019 GAS FLANGED PUMP

  STENS 030-019 GAS FLANGED PUMP

Bore:0.591 "
Stroke:0.299 "

REPLACES:
  • GENERAL PUMP EZ3030G34UI
  • and others
•Gallons Per Minute:3.0
•Pounds Per Square Inch:3,000
•RPM:3,400
•GHP:10.8
•EZ Series 44
•Triplex plunger pump with hollow shaft
•Flanged for direct couple to gasoline engines
•SAE J609B
•Forged brass manifold with exclusive lifetime warranty
•Flanged for mounting on up to 13 HP engines
•Maximum inlet pressure 125 PSI
•Maximum fluid temperature 165� F
•Inlet port thread 1/2"-14 BSP-F
•Discharge port thread 3/8"-19 BSP-F
•Shaft diameter 1"
•Pump dimensions 8.8" x 9.7" x 6.5"
•Maximum inlet vacuum 3 ft., water (2.6" Hg)
•Crankcase oil capacity 14 oz.
•Type:Gas Flanged

  Price: $679.95


STENS 030-023 GAS FLANGED PUMP

  STENS 030-023 GAS FLANGED PUMP

Bore:0.591 "
Stroke:0.374 "

REPLACES:
  • GENERAL PUMP EZ3040GUI
  • and others
•Gallons Per Minute:4.0
•Pounds Per Square Inch:3,000
•RPM:3,400
•GHP:14.4
•EZ Series 44
•Triplex plunger pump with hollow shaft
•Flanged for direct couple to gasoline engines
•SAE J609B
•Forged brass manifold with exclusive lifetime warranty
•Flanged for mounting on up to 13 HP engines
•Maximum inlet pressure 125 PSI
•Maximum fluid temperature 165� F
•Inlet port thread 1/2"-14 BSP-F
•Discharge port thread 3/8"-19 BSP-F
•Shaft diameter 1"
•Pump dimensions 8.8" x 9.7" x 6.5"
•Maximum inlet vacuum 3 ft., water (2.6" Hg)
•Crankcase oil capacity 14 oz.
•Type:Gas Flanged

  Price: $734.95


STENS 030-027 SOLID SHAFT PUMP

  STENS 030-027 SOLID SHAFT PUMP

Bore:0.787 "
Stroke:0.472 "

REPLACES:
  • GENERAL PUMP TS1511
  • and others
•Gallons Per Minute:4.0
•Pounds Per Square Inch:3,500
•RPM:1,450
•GHP:9.6
•T Series 47
•Triplex plunger pump with solid shaft
•Forged brass manifold with exclusive lifetime warranty
•Heavy-duty tapered roller bearings
•Oversized connecting rods for maximum life
•Maximum inlet pressure 125 PSI
•Maximum fluid temperature 165� F.
•Inlet port thread 1/2"-14 BSP-F
•Discharge port thread 3/8"-19 BSP-F
•Shaft diameter .945"
•Pump dimensions 12.6" x 9.2" x 6.9"
•Maximum inlet vacuum 9 ft., water (7.9" Hg)
•Crankcase oil capacity 40.6 oz.
•Type:Solid Shaft

  Price: $807.95


STENS 030-031 SOLID SHAFT PUMP

  STENS 030-031 SOLID SHAFT PUMP

REPLACES:
GENERAL PUMP TS2021
and others
Bore: 0.787"
GHP: 10.8
Gallons Per Minute: 4.5
Pounds Per Square Inch: 3,500
RPM: 1,125
Stroke: 0.630"
Crankcase oil capacity 40.6 oz.
Discharge port thread 3/8"-19 BSP-F
Forged brass manifold with exclusive lifetime warranty
Heavy-duty tapered roller bearings
Inlet port thread 1/2"-14 BSP-F
Maximum fluid temperature 165° F
Maximum inlet pressure 125 PSI
Maximum inlet vacuum 9 ft., water (7.9 Hg)
Oversized connecting rods for maximum life
Pump dimensions 12.6" x 9.2" x 6.9"
Shaft diameter .945"
T Series 47
Triplex plunger pump with solid shaft
Type: Solid Shaft

  Price: $918.95


STENS 030-303 Gas Flanged Pump

  STENS 030-303 Gas Flanged Pump

Comet 6525.0001.00

Bore: .591 "
GHP: 6.4
Gallons Per Minute: 2.2
Pounds Per Square Inch: 2500
RPM: 3,400
Stroke: .218 "
1/2" FGH Inlet - 3/8" MPT Outlet
Built-in easy start
Built-in uniflow unloader and chemical injector
Capacity of 4.5 oz pump oil
Discharge port thread - 3/8" MPT
Forged brass manifold
Inlet port thread - 1/2" FPT
Maximum fluid temperature 145 degrees F
Maximum inlet pressure - 120 PSI
One oil cap for travel and operation
Patent registered ball bearing design
Quick mount flange
Shaft diameter 3/4"
Stainless steel check valves
Stainless steel plungers
Steel shaft with built-in key
Type: Gas Flanged

  Price: $310.95


STENS 030-311 Gas Flanged Pump

  STENS 030-311 Gas Flanged Pump

Comet 6525.0005.00

Bore: .591 "
GHP: 7.7
Gallons Per Minute: 2.8
Pounds Per Square Inch: 2500
RPM: 3,400
Stroke: .254 "
1/2" FGH Inlet - 3/8" MPT Outlet
Built-in easy start
Built-in uniflow unloader and chemical injector
Capacity of 4.5 oz pump oil
Discharge port thread - 3/8" MPT
Forged brass manifold
Inlet port thread - 1/2" FPT
Maximum fluid temperature 145 degrees F
Maximum inlet pressure - 120 PSI
One oil cap for travel and operation
Patent registered ball bearing design
Quick mount flange
Shaft diameter 3/4"
Stainless steel check valves
Stainless steel plungers
Steel shaft with built-in key
Type: Gas Flanged

  Price: $310.95


STENS 040-006 Rotor Desa PP204

  STENS 040-006 Rotor Desa PP204

• Includes the following items:
• 1/2" carbon rotor
• Rotor insert
• 1/2" rotor blade

REPLACES:
  • DESA HA3004
  • DESA PP204
  • and others
FITS:
  • DESA C35, C35A, C35B, C50D, C50E, C50F, C100D,C100E, C100F, C150D, C150E, C150F
  • KNIPCO F30, F50A, F50E, F50F, F50G, F66D, F110D,F110E, F110F, F110G, G110H, F150F, F150G,F150H
  • KOEHRING K30, K50A, K100, K100A
  • MASTER B50A, B50B, B50D, B50E, B50F, B66D, B70B,B70BT, B100A, B100B, B100D, B100G, B110,B150B, B150C, B150F, B150FT, B150G, B150GT,B150M, B165
  • REDDY R30, R35, R35A, R35B, R50, R50A, R50B, R70BT,R70BT, R70CT, R100, R100A, R100B, R110, R150,R150A, R150AT, R150B, R150BT, R150D, R150M,R155, R165, M30, M50A, M66D, M100D
  • REMINGTON REM35, RE35A, REM50, REM50W, REM50A,REM50AW, REM100, REM100A, REM110, REM150,REM150A, REM150B, REM165
  • and others


  Price: $42.95


Page 10 of 854 | 8531 Results