Shop by Phone: 1-866-563-9925 (Toll Free)
Lawn Mower Parts and Equipment Since 1982!

Trailer Equipment Racks

We carry a large selection of Trailer Equipment Racks.  The following are the most popular Trailer Equipment Racks.  If you do not see the Trailer Equipment Rack you need,  please complete the Lawn Mower Parts Request Form and we will be happy to assist you.

38 Trailer Equipment Racks Found


JUNGLE JIMS 1BH BLOWER HOLDER FOR ONE BLOWER

The Blower Holder 1 holds one backpack blower and comes with an individual locking mechanism for simple locking capability. The new design not only secures the blower, but also supports the blower tube.

Blower and Trailer NOT include
Price: $82.81



JUNGLE JIMS 1TR TRIMMER RACK FOR ONE TRIMMER

The new Trimmer Rack design enables the user to load and unload the trimmer even easier than before. This ground-breaking design also allows the customer to custom fit each trimmer to prevent rolling during transport.

Secure one trimmer quickly and easliy! The spring loaded design and heavy duty locking bar deters theft, while the innovative compression pin and hook device eliminates spinning during transport.

Trimmer and Trailer NOT Included
Price: $85.95



JUNGLE JIMS 2BH GC BLOWER HOLDER FOR 2 BLOWERS

Simply load and unload two backpack blowers with individual hooks and locking mechanisms. The Blower Holder 2 also possesses a support arm for the top blower and height adjuster, so that the bottom blower rests on the rail of the trailer. This new design lessens the strain on the handles of the blower and provides more stability. Blower tube holders come standard with both blower versions.

Blowers and Trailer NOT included
Price: $138.95



JUNGLE JIMS 2TR TRIMMER RACK FOR 2 TRIMMERS

The new Trimmer Rack design enables the user to load and unload the trimmer even easier than before. This ground-breaking design also allows the customer to custom fit each trimmer to prevent rolling during transport.

Secure two trimmers quickly and easliy! The spring loaded design and heavy duty locking bar deters theft, while the innovative compression pin and hook device eliminates spinning during transport. The 3TR & 4TR comes with a spool line holder that alleviates the headaches of tangled trimmer line. Optional Tool Rack (TRTOOL) can be attached to 4TR, 3TR or 2TR.

Trimmers and Trailer NOT included
Price: $171.17



JUNGLE JIMS 3TR TRIMMER RACK FOR THREE TRIMMER

The new Trimmer Rack design enables the user to load and unload the trimmer even easier than before. This ground-breaking design also allows the customer to custom fit each trimmer to prevent rolling during transport.

Secure three trimmers quickly and easliy! The spring loaded design and heavy duty locking bar deters theft, while the innovative compression pin and hook device eliminates spinning during transport. The 3TR & 4TR comes with a spool line holder that alleviates the headaches of tangled trimmer line.

Optional Tool Rack (TRTOOL) can be attached to 4TR, 3TR or 2TR.

Trimmers and Trailer NOT included
Price: $241.91



OREGON 42-032 BACKPACK BLOWER RACK HOLDER

UNIVERSAL Backpack Blower Rack/Holder
BR3000 Backpack Blower Rack/Holder securely holds and locks most commercial backpack blowers using a flat pin design.
The rack has a heavy-duty black vinyl coating and comes with hardware and one lock.
Will internal wall mount or mount external on trailers.ID=6
Price: $209.95



OREGON 42-043 HAND TOOL RACK ACCESSORY

UNIVERSAL Hand Tool Rack HT2500 Hand Tool Rack Mounts on the 42-063 Trimmer Guard.
Holds up to 5 rakes, shovels, brooms or other hand tools.
Durable powder-coated finish.
Price: $107.95



OREGON 42-044 MULTI PURPOSE HOLDER

UNIVERSAL Multi-purpose Holder
MP2000 Multi-purpose Holder Powder coated holder will hold most chainsaws and hand-held blowers.
Includes bungee cord
Price: $74.95



OREGON 42-063 VINYL COATED TRIMMER GUARD

UNIVERSAL Vinyl Coated Trimmer Racks
Steel racks with heavy-duty black vinyl coating securely hold 3 trimmers and/or brushcutters.
For mounting on open trailers.
Includes three keyed alike padlocks.
Price: $221.95



OREGON 42-064 VINYL COATED EQUIPMENT RACKS FOR OPEN TRAILERS

UNIVERSAL Vinyl Coated Equipment Racks
Steel racks with heavy-duty black vinyl coating securely hold line trimmers, brushcutters, edgers, shaft hedge clippers and pole saws.
Rack has three adjustable 2" wide slots to accommodate a variety of equipment.
For mounting on open trailers.
Includes three keyed alike padlocks.
Price: $317.95



OREGON 42-065 VINYL COATED EQUIPMENT RACK FOR ENCLOSED TRAILERS

UNIVERSAL Vinyl Coated Equipment Racks
Steel racks with heavy-duty black vinyl coated racks securely hold line trimmers, brushcutters, edgers, shaft hedge clippers and pole saws.
Rack has three adjustable 2” wide slots to accommodate a variety of equipment.
For mounting in closed trailers.
Price: $343.95



OREGON 42-078 WATER COOLER HOLDER

UNIVERSAL Water Cooler Holder
Powder-coated steel holder secures any size water cooler with supplied bungee cord.
Price: $139.95






JUNGLE JIMS 4TR TRIMMER TACK FOR 4 TRIMMERS

The new Trimmer Rack design enables the user to load and unload the trimmer even easier than before. This ground-breaking design also allows the customer to custom fit each trimmer to prevent rolling during transport.

Secure four trimmers quickly and easliy! The spring loaded design and heavy duty locking bar deters theft, while the innovative compression pin and hook device eliminates spinning during transport. The 3TR & 4TR comes with a spool line holder that alleviates the headaches of tangled trimmer line.

Optional Tool Rack (TRTOOL) can be attached to 4TR, 3TR or 2TR.

Trimmers and Trailer NOT included
Price: $247.95



TRIMMERTRAP BR-1 BLOWER RACK

TrimmerTrap BR-1 Blower Rack

Provides absolute security for your backpack blowers
  • Simply hang blower on hook. The automatic latch with stainless steel spring positively secures the blower. Backrest has holes for attaching an optional stretch cord.
  • Extremely fast loading and unloading time.
  • Stainless steel latch spring.
  • Heavy gauge all welded steel construction includes high grade mounting hardware and durable powder coat finish.
  • Mounts to open or enclosed trailers quickly and easily.
  • Attaches to upper and lower rails of trailer creating a much stronger mount than racks that attach to the top rail only.
  • Some model blowers require the installation of a special adapter kit. The AK-4 is required for the following blowers for the first generation BR-1-1 and DB-1-1:
  • Red Max 4800, 5000, and 8000
  • Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
  • The AK-4 is required for the following blowers for the second generation BR-1-2 and DB-1-2:
  • Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
  • All Stihl blowers require either the ST-1 (Stihl 300 or 400 series) or ST-2 (Stihl 500 or 600 series) Blower Rack.



TRIMMERTRAP BR-1 Replaced By TRIMMERTRAP BR-1-2


Price: $84.95



TrimmerTrap CR-3 Combination Rack (includes one SC-1 cord)

TrimmerTrap CR-3 Combination Rack

Most damage to handheld blowers, hedge trimmers, and chainsaws occurs during transport, not use!

The combination rack will increase the useful life of these tools by protecting them from the abuse they receive bouncing around in the backs of trucks and trailers.

Extra heavy gauge all welded steel construction and durable powder coat finish.

Includes heavy duty stretch cord to secure tool.

Mounts to open or enclosed trailers quickly and easily.


Price: $75.95



TrimmerTrap DB-1-3 Dual Backpack Blower Rack

TrimmerTrap DB-1 Double Blower Rack

The choice of Professional Landscapers. This is the blower rack to have when space and strength are important. The easy to use automatic positive latching is "Fast and Foolproof". Simply pull out the knob and raise the slide to load or unload blowers. Constructed using 1 1/2" steel tubing and heavy duty components, the DB-1 is rugged enough to stand up to years of heavy commercial use.

Locks with a standard long shackle padlock.
Uses less trailer space than side by side single blower racks.
Durable powder coat finish.
Includes mounting hardware.
Mounts to both upper and lower trailers rails for stability.
STIHL BR 300 & 400 Series blowers require a special adapter kit (AK-2).
THIS RACK IS NOT RECOMENDED FOR BR 500 & 600 SERIES BLOWERS Some model blowers require the installation of a special adapter kit.
The AK-4 is required for the following blowers for the first generation BR-1-1 and DB-1-1:
Red Max 4800, 5000, and 8000
Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
The AK-4 is required for the following blowers for the second generation BR-1-2 and DB-1-2:
Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
All Stihl blowers require either the ST-1 (Stihl 300 or 400 series) or ST-2 (Stihl 500 or 600 series) Blower Rack.


Price: $211.95



TRIMMERTRAP ETTT-2 TRIMMER RACK

TrimmerTrap ETTT-2 Trimmer Rack

Patent # 5647489

Both the TT-2 Original and the TT-2 PRO-4 are available in Enclosed Trailer versions. Simply attach each upright to the wall, trimmers are stored up out of the way and protected from damage.
Price: $270.95



JUNGLE JIMS GC COOLER COOLER HOLDER ASSEMBLY

A cooler holder that can be mounted independently anywhere on your trailer. Holds up to five gallon water cooler.

COOLER AND TRAILER NOT INCLUDED.
Price: $51.95



TrimmerTrap HS-1 Hedge Trimmer Rack

TrimmerTrap HS-1 Hedge Trimmer Rack

The HS-1 will secure and protect both single and double edge hedge trimmers of any length. The vertical position uses less trailer space and stores the trimmer up and out of the way, preventing damage. Trimmers with blades 24 inches and longer can be locked in place by simply attaching a standard padlock to the blade. A "thru hole" for a locking pin can be used to secure shorter blades.

Thick, replaceable rubber pads protect gear case and power head.
Heavy gauge steel post and sheath.
Plated finish stands up to the elements.
Includes a heavy duty stretch cord.


Price: $74.95



TrimmerTrap HT-1-2 Hand Tool Rack for Open Trailer Trimmer Racks

TrimmerTrap HT-1 Accessory Hand Tool Rack

Used in conjunction with either one of our trimmer racks the TrimmerTrap HT-1 is the low cost answer to storage of rakes, shovels, brooms, etc. Simple bolt on installation will fit all existing TrimmerTrap Trimmer Racks.

For enclosed trailers, see our EH-1 line of products.
Adjustable width eases installation and includes assembly hardware.
Handle holder protects handles and mounts out of the  way on the trailer floor or trailer top rail.
Holds five tools out of harms way, yet easily accessible.
Durable powder coat finish.


Price: $116.95



JUNGLE JIMS JUNGLE-SHEATH JUNGLE SHEATH

This device safely holds single and double-sided gas powered hedge shears. Locking capabilities make the JUNGLE SHEATH theft resistant.

Trimmer and Trailer NOT included
Price: $72.95



JUNGLE JIMS JUNGLE-SPRACK SPRACK SPAYER RACK

JUNGLE JIMS JUNGLE SPRACK

The Jungle Sprack mounts to your trailer and secures one backpack sprayer. Locking mechanism allows for anti-theft capabilities.
Price: $72.95



TrimmerTrap LH-1 Trimmer Line Holder (holds most size spools)

TrimmerTrap LH-1 Trimmer Line Holder

Easily installs on the TT-1 and TT-2 Trimmer Racks or just about anywhere else.

Accepts the most popular sizes of trimmer line spools
Does NOT include mounting hardware
Easily installs on any of our trimmer racks or just about anywhere else you may need it
Holds most spool sizes
Neatly stores trimmer line out of the way, yet accessible
Tension on the spool prevents line from unwinding until you need it.


Price: $29.95



TrimmerTrap MR-1 Multi Purpose Trimmer Clamp

TrimmerTrap MR-1 Multi-Use Trimmer Clamp

Every landscape contractor needs at least one MR-1 Trimmer Clamp. Quickly load or unload trimmers with the flip of a single lever.

The adjustable spring loaded jaws, equipped with large rubber pads, clamp down for a tight, firm grip on almost any line trimmer or stick edger. The most important feature of the MR-1 is its versatility.

The clamp and clamp stand are designed as separate parts, and are available separately. This enables you to inexpensively equip numerous pieces of equipment with clamp stands yet purchase only as many clamps as needed. By simply removing a single pin, the clamp can be removed from its stand and installed into a different stand.

Go from one mower to another or to a work bench in the shop. You can even install a clamp stand to your truck or trailer to be used when working on trimmers. Hows that for versatility?

Note: The MR-1 is for use in off road applications only and is NOT to be used in any application where a danger could be manifested should the trimmer come out of the clamp. TrimmerTrap, Inc. does however offer a variety of trimmer racks designed for over the road transportation.


Price: $222.95



TrimmerTrap SB-1 Security Bar (fits TT-2 Original only)

TrimmerTrap SB-1 Security Bar

Does NOT include mounting hardware
Increased theft protection with built-in lock guard and extra heavy steel construction
Installs in seconds

Fits our 051-236 Trimmer Rack
Fits our 051-251 Trimmer Rack
Price: $59.95



TrimmerTrap SO-1 Hedge Trimmer Rack for Enclosed Trailers

TrimmerTrap SO-1 Hedge Trimmer Sheath

Organization is crucial when working from an enclosed truck or trailer. The SO-1 will safely secure both single and double edge hedge trimmers up and out of the way. Simply attach SO-1 to the wall using its two attachment points. Thick, replaceable rubber pad protects gear case.

Heavy gauge steel construction.
Plated finish stands up to the elements.
Includes a heavy duty stretch cord.

Hedge Trimmer NOT Included
Price: $58.95



JUNGLE JIMS SPOOLMATE SPOOL MATE TRIMMERLINE HOLDER

JUNGLE JIMS - SPOOLMATE SPOOL MATE TRIMMERLINE HOLDER

Tired of throwing away expensive trimmer line, that becomes a useless tangled mess because the flimsy plastic spool housing gets broken or damaged? Try the Spool Mate!

The durable frame construction encloses and protects the spool housing. This spring loaded design helps to prevent unraveling, and can be used with any size spool or trimmer line.

Have you or your employees ever looked in vain for something to cut trimmer line? The integrated cutting handle eliminates the need for a separate cutting device.
Price: $76.95



TrimmerTrap SR-1 Backpack Sprayer Rack

TrimmerTrap SR-1 Backpack Sprayer Rack

(holds ONLY Solo style sprayers with round tubular frame)
Backpack sprayers are difficult to deal with when not being used. They fall over and slide around in the back of your truck, spill, and get broken and run over by other equipment.

The SR-1 will prevent all of these problems. Works for most Solo, Lesco, Echo sprayers, and more. Heavy gauge 1 1/2" square tube provides super strength. Plated finish resists chemicals.


Price: $74.95



TrimmerTrap ST-1 Blower Rack (holds STIHL 300 & 400 blowers)

TrimmerTrap ST-1 STIHL BR Series Blower Rack

The ST-1 is the only rack designed specifically for the BR 300 & 400 Series blowers. Simply set your blower on the bottom bracket and pivot the top onto the hang pin, and finish by installing the retaining pin. The blower is secured at the top and bottom and will not move around.

Extremely fast "in and out time."
Locks with a standard Padlock.
Heavy gauge welded steel construction is plated for corrosion resistance.
Mounts to open or enclosed trailers and includes mounting hardware.
Retaining pin is secured with a lanyard to prevent loss.

NOTE: holds only BR300 & 400 series. Does not hold BR500 & 600 series blowers ("Turtle" style blowers).
Price: $59.95



JUNGLE JIMS STIHL<500 STIHL ADAPT FOR LESS THAN 500 S

Adapter bracket required to mount Stihl back pack blower model less than 500.
Price: $29.95



JUNGLE JIMS STIHL>500 STIHL MT BRACKET FOR 500 OR GREAT

Adapter bracket required to mount Stihl back pack blower model greater than 500.
Price: $37.95



TrimmerTrap TR-1 Portable Hand Tool Rack

TrimmerTrap TR-1 Portable Hand Tool Rack

"Base Mount" provides the height needed for use on open trailers or can be shortened for use on pickup trucks. Installing a "Base Mount" to each vehicle assures quick switch over of the "Rack Unit".
The adjustable “Quick Coupler” provides the offset needed for mounting on pickup trucks and utility vehicles. Use it in conjunction with a “Base Mount” or by itself as a mounting location.
By pulling a single “Quick Release Pin” the “Rack Unit” can be removed in seconds and placed on another vehicle or stored inside overnight with no need to remove the individual tools. Heavy gauge plated steel construction stands up to weather and years of hard use.




Price: $189.95



TrimmerTrap TT-1 Trimmer Rack (holds 2)

TrimmerTrap TT-1 Trimmer Rack

The TT-1 Trimmer Rack is perfect for semi-pros and small contractors who only need to carry two trimmers. Also popular with larger contractors for carrying stick edgers or spare trimmers.

Holds two trimmers.
Load or unload a trimmer in 3 seconds.
Trimmer handle rest is on an angle so that trimmer will not stay on the rack unless latched.
3/16" all welded steel construction includes high grade mounting hardware and durable powder coat finish.
Locks trimmers individually with standard padlocks.
Latch clips are secured to hinge with a lanyard to prevent loss.
Mounts to open or enclosed trailers quickly and easily.
Attaches to upper and lower rails of trailer creating much stronger mount than racks that attach to the top rail only.
Replaceable handle cradle protects and tightly holds trimmers in place.




Price: $149.95



TrimmerTrap TT-2 Pro-4 Trimmer Rack (holds 4)

TrimmerTrap TT-2 Pro 4 Trimmer Rack

Length: 57 "
Attaches to upper and lower rails of trailer, creating a strong mount
Broken triggers, flooded engines and spilled fuel are a thing of the past
Can be loaded and unloaded in 2 seconds
Does NOT include mounting hardware
Holds 4 trimmers
Locks with a single padlock
Mounts to open trailers
Spacing between the hooks 11 1/2"
Trimmers are automatically latched and tightly clamped in place, completely eliminating any chance for operator error
Trimmers will not roll around or slide back and forth in the rack.


Price: $399.95



TrimmerTrap WC-1 Water Cooler Rack (includes 2 AJ-1 straps)

TrimmerTrap WC-1 Cooler Rack

Bolt a TrimmerTrap WC-1 to your open or enclosed trailer or truck and secure any size cooler using the two, four foot long, one inch straps with cam lock buckles. The rack is made of one piece 3/16" steel construction.


Price: $86.95



Showing 38 Products