First, if using a dipstick remove it from the cap. Determine the best location to drill a hole using a letter Q drill bit. Since you’re working with plastic, it may also be possible to use a 21/64" or 5/16" bit too. Next, tap the whole with a 1/8" NPT tap, install the barb, epoxy in place and you’re finished.
Briggs and Stratton, Murray and Snapper have merged.
Briggs and Stratton 691764, Murray 691764 and Snapper 691764
are the same HOSE CONNECTOR.
MANUFACTURERS NAME:BRIGGS AND STRATTON MANUFACTURER PART NO:691764
"Many thanks for the prompt parts
order. I waited over 4 months for my local repair shop to get the
part and they ended up with the wrong one. Next time I will do it myself."
"I will keep your company book-marked
and order from you first in the future! Your kind of service is
"Your standard of customer care and swift response
has been outstanding, many thanks for your favorable conclusion, it is