Shop by Phone: 316-522-2006
Lawn Mower Parts and Equipment Since 1982!
 
Home >

TrimmerTrap MR-1 Multi Purpose Trimmer Clamp

TrimmerTrap MR-1 Multi Purpose Trimmer Clamp
Click to Enlarge

Email This Page


Manufacturer

TrimmerTrap Multi Purpose Trimmer Clamp MR-1

Internet Price: $222.95
Share Via Email

TrimmerTrap MR-1 Multi Purpose Trimmer Clamp

Description

TrimmerTrap MR-1 Multi-Use Trimmer Clamp

Every landscape contractor needs at least one MR-1 Trimmer Clamp. Quickly load or unload trimmers with the flip of a single lever.

The adjustable spring loaded jaws, equipped with large rubber pads, clamp down for a tight, firm grip on almost any line trimmer or stick edger. The most important feature of the MR-1 is its versatility.

The clamp and clamp stand are designed as separate parts, and are available separately. This enables you to inexpensively equip numerous pieces of equipment with clamp stands yet purchase only as many clamps as needed. By simply removing a single pin, the clamp can be removed from its stand and installed into a different stand.

Go from one mower to another or to a work bench in the shop. You can even install a clamp stand to your truck or trailer to be used when working on trimmers. Hows that for versatility?

Note: The MR-1 is for use in off road applications only and is NOT to be used in any application where a danger could be manifested should the trimmer come out of the clamp. TrimmerTrap, Inc. does however offer a variety of trimmer racks designed for over the road transportation.




MANUFACTURERS NAME: TrimmerTrap
MANUFACTURER PART NO: MR-1

RECOMMENDED PRODUCTS: