Shop by Phone: 316-522-2006
Lawn Mower Parts and Equipment Since 1982!
 
Home >

PROMAG PM137 AR-15/M16 A2 FLIPUP RR DUA APERT

PROMAG PM137 AR-15/M16 A2 FLIPUP RR DUA APERT
Click to Enlarge

Email This Page


Manufacturer

PROMAG AR-15/M16 A2 FLIPUP RR DUA APERT PM137

Internet Price: $102.95
Share Via Email

PROMAG PM137 AR-15/M16 A2 FLIPUP RR DUA APERT

Description

The PM137 AR-15 / M16 A2 rear sight can be used as a co-witness iron sight with most red dot and holographic sights, or as a stand-alone sight. Weighing in at just over two ounces, it features the standard military A2-style double peep aperture, which allows for a known point of impact. The sight has full windage adjustment; one click of the windage knob provides approximately 0.48 MOA (minute of angle) change when mounted on the M16 A3 flat top rifle and about 0.65 MOA on the M4 carbine. Initial zero is set by adjusting the weapon’s front sight post. It is low profile, so that when in the down position it will clear most optics. The sight locks in its upright position, a spring loaded release must be depressed to place the sight in the down position. The sight body and stem are machined from T6 aircraft grade aluminum, then type III hard anodized. Steel parts are CNC machined, then black phosphated per mil-spec. The sight is precision machined to fit AR-15 / M16 flat top A3 upper receiver rifles and carbines. The sight is mounted to the rail via a locking bar and secured with a cross slotted, knurled thumb screw.



WEIGHT: 0.2 lbs

MANUFACTURERS NAME: PROMAG
MANUFACTURER PART NO: PM137


"Many thanks for the prompt parts order.  I waited over 4 months for my local repair shop to get the part and they ended up with the wrong one. Next time I will do it myself."

-
"I will keep your company book-marked and order from you first in the future! Your kind of service is exceptional!"

-
"Your standard of customer care and swift response has been outstanding, many thanks for your favorable conclusion, it is much appreciated."

-

RECOMMENDED PRODUCTS: