Shop by Phone: 316-522-2006
Lawn Mower Parts and Equipment Since 1982!
 
Home >

SPEER SPEER4406 10MM 180GRAIN GDHP/100

SPEER SPEER4406 10MM 180GRAIN GDHP/100
Click to Enlarge

Email This Page


Manufacturer

SPEER 10MM 180GRAIN GDHP/100 SPEER4406

Internet Price: $35.95
Share Via Email

SPEER 4406 10MM 180GRAIN GDHP/100

Description

40/10mm Gold Dot HP=Hollow Point Diameter: .400" Weight: 180 Grains Ballistic Coefficient: 0.143 Box Count: 100 Uni-Cor Construction Looking for the best high-performance handgun bullet? Look to Gold Dot. Using Uni-Cor technology, Speer created the first bonded core handgun bullet. Bonding the jacket to the core means Speer has virtually wiped out the main cause of handgun bullet failures-core-jacket separations. The result is high-retained weight for tactical penetration under the toughest conditions. Expansion is important also, so Speer uses a patented two-stage process that creates the hollow point cavity after the jacket is built. The first stage flutes the jacket and core simultaneously, controlling the final diameter of the expanded bullet. The second stage controls the rate of expansion and finishes the pint for smooth feeding. This process gives Speer engineers' very precise control in designing each bullet for optimum performance. Uni-Cor makes Gold dot an accurate bullet, too. The process builds such a uniform jacket that wall thickness variation is nil. Gold Dot was built to meet or exceed stringent law enforcement standards, including the tough barrier tests. Retained weights in bare gelatin are seldom less than 98 percent. Next time you need a premium handgun bullet, call for Gold Dot. Note: These are component bullets, not loaded ammunition.



WEIGHT: 2.6 lbs

MANUFACTURERS NAME: SPEER
MANUFACTURER PART NO: SPEER4406


RECOMMENDED PRODUCTS: