Shop by Phone: 1-866-563-9925 (Toll Free)
Lawn Mower Parts and Equipment Since 1982!

COLD STEEL Products

We carry a large selection of COLD STEEL products.  The following are the most commonly purchased COLD STEEL products.

Search for COLD STEEL Products


958 COLD STEEL Products Found

COLD STEEL 10BC COUNTER TAC I

It's been observed that fashion is fleeting. What's "in" now will soon be "out" of style. The knife industry, like any other, is subject to the same winds of political correctness and notions of popular taste. At Cold Steel, we try to stay abreast of the currents of change, but we also recognize that good design never goes out of style. The Counter Tac boot knives were designed with this simple philosophy in mind. The full tang blades are made from beautifully polished AUS 8A stainless steel, that's vacuum heat treated, and sub zero quenched for strength. They have a hollow ground back and end in a sturdy but needle sharp point that's ideal for effortless penetration, and of course the edge is razor sharp. The ergonomic design of the Kraton grip is comfortable and adaptable to any fighting style, and the deeply textured surface and double guard will insure that the knife is not likely to slip from your hand under any circumstances. Finally, each Counter Tac is shipped with a state of the art Secure-Ex sheath, complete with a removable boot/belt clip and lashing slots so you can carry or conceal it just about anywhere. *Blade has a flat back Specifications: - Blade: 5" - Overall: 9 " - Weight: 5.1oz - Thickness: 5mm - Handle: Kraton - Steel: AUS 8A - Sheath: Secure-Ex
Price: $94.95



COLD STEEL 10DC COUNTER TAC II

It's been observed that fashion is fleeting. What's "in" now will soon be "out" of style. The knife industry, like any other, is subject to the same winds of political correctness and notions of popular taste. At Cold Steel, we try to stay abreast of the currents of change, but we also recognize that good design never goes out of style. The Counter Tac boot knives were designed with this simple philosophy in mind. The full tang blades are made from beautifully polished AUS 8A stainless steel, that's vacuum heat treated, and sub zero quenched for strength. They have a hollow ground back and end in a sturdy but needle sharp point that's ideal for effortless penetration, and of course the edge is razor sharp. The ergonomic design of the Kraton grip is comfortable and adaptable to any fighting style, and the deeply textured surface and double guard will insure that the knife is not likely to slip from your hand under any circumstances. Finally, each Counter Tac is shipped with a state of the art Secure-Ex sheath, complete with a removable boot/belt clip and lashing slots so you can carry or conceal it just about anywhere. *Blade has a flat back Specifications: - Blade: 3 3/8" - Overall: 6 3/4" - Weight: 2.2oz - Thickness: 4mm - Handle: Kraton - Steel: AUS 8A - Sheath: Secure-Ex
Price: $84.95



COLD STEEL 10DSM PEACE KEEPER I IN SAN MAI III

Peace Keeper I in San Mai III Specifications: - Blade Length: 7" - Overall Length: 12 1/3" - Steel: VG-1 San Mai III - Weight: 7.9 oz - Handle: 5 1/4" Long Kraton - Sheath: Secure-Ex Sheath
Price: $169.95



COLD STEEL 11SDS BRAVE HEART

The highland warriors of Scotland's distant past carried a small yet lethal knife with a distinctively carved wooden handle. It was called the Skean Dhu (which means "Black Knife" in Gaelic, the ancient language of the British Isles). Typically, a kilt clan warrior carried it on his person or wedged in his stocking top. Cold Steel's latest version of this romantic and historically significant knife is called The Brave Heart. Designed by Lynn C. Thompson, it is a small, compact, multi-purpose knife, that will serve admirably as a hunting or utility knife or as an alternative to a double edge boot knife. The thin, needle sharp tip is ideally suited for piercing, and the precision taper ground blade has been honed by hand to razor sharpness. The traditional jimping on the blade spine is both ornamental and functional, providing an aggressive non-slip platform for the thumb or forefinger to bear downward as needed for maximum control. The compact Kraton handle is designed to accommodate a wide variety of comfortable and secure grip positions, and its slim, flat cross section insures that it will resist turning or twisting in the hand. Kraton is a superior handle material that Cold Steel has employed for decades because its robust traction and resiliency allows it to withstand the shock of even the hardest blows. The Brave Heart comes with a lightweight yet sturdy Secure-Ex sheath that's been specially designed for an inconspicuous presence. It comes with a detachable boot/belt clip and lashing slots so you can wear or carry it everywhere you go. Blade: 4" Overall: 7 3/4" Thick: 2.8mm Weight: 2.8oz Steel: AUS 8A Stainless Kraton handle Sheath: Secure-Ex
Price: $74.95



COLD STEEL 12BS SAFE MAKER I

Cold Steel has been making push knifes for a quarter century. In those twenty five years we have continually been refining our designs, discarding features that didn't performa as well as we would have liked and enhancing those that did. These blades, and the wealth of experience that has gone into their manufacture, have paid off handsomely for Cold Steel as they have generated quite a following among law enforcement and military personnel around the world. This is because they offer "big knife" cutting and piercing potential in a very compact, easily portable size, and, unlike a revolver or semi automatic pistol, they never break, malfunction, or run out of ammunition. Designed by Lynn C. Thompson, our Safe Maker push knifes are, without doubt, the finest commercially made push knives in the world. The blade, shaft, and T shaped tang are all drop forged from one piece of AUS 8A stainless steel. This process, though costly, eliminates any unwanted sharp edges or surfaces that would irritate the hand or fingers when the knife is clasped in a closed fist, and it produces a better knife, since the subsequent vacuum heat treatment and sub zero quench, renders the blades virtually unbreakable. Well made blades deserve equally well-made grips. A lot of time and energy went into the production of our 'T' shaped handles. Made of shock absorbing Kraton they totally encapsulate the tang and part of the shaft so they can be comfortably and sercurely grasped in the fist with the blade jutting out between the fingers and used to deliver absolutely devastating punching and slashing blows. The Safe Maker knives includes an easily concealable and sturdy Secure-Ex boot/belt sheath. *Blade has a flat back Specifications: - Blade: 4 " - Overall: 6 3/8" - Thick: 5mm - Weight: 3.7oz - AUS 8A Stainless steel blades with Kraton handles. - Secure-Ex boot/belt sheath
Price: $94.95



COLD STEEL 12BT SAFE KEEPER II

Safe Keeper II Specifications: - Blade Length: 3 3/4" - Overall Length: 6 3/8" - Steel: Japanese AUS 8A Stainless - Weight: 3.6 oz - Handle: 2 5/8" Long Kraton - Sheath: Secure-Ex Sheath
Price: $59.95



COLD STEEL 12CS SAFE MAKER II

Cold Steel has been making push knifes for a quarter century. In those twenty five years we have continually been refining our designs, discarding features that didn't performa as well as we would have liked and enhancing those that did. These blades, and the wealth of experience that has gone into their manufacture, have paid off handsomely for Cold Steel as they have generated quite a following among law enforcement and military personnel around the world. This is because they offer "big knife" cutting and piercing potential in a very compact, easily portable size, and, unlike a revolver or semi automatic pistol, they never break, malfunction, or run out of ammunition. Designed by Lynn C. Thompson, our Safe Maker push knifes are, without doubt, the finest commercially made push knives in the world. The blade, shaft, and T shaped tang are all drop forged from one piece of AUS 8A stainless steel. This process, though costly, eliminates any unwanted sharp edges or surfaces that would irritate the hand or fingers when the knife is clasped in a closed fist, and it produces a better knife, since the subsequent vacuum heat treatment and sub zero quench, renders the blades virtually unbreakable. Well made blades deserve equally well-made grips. A lot of time and energy went into the production of our 'T' shaped handles. Made of shock absorbing Kraton they totally encapsulate the tang and part of the shaft so they can be comfortably and sercurely grasped in the fist with the blade jutting out between the fingers and used to deliver absolutely devastating punching and slashing blows. The Safe Maker knives includes an easily concealable and sturdy Secure-Ex boot/belt sheath. Includes a steel bead chain lanyard so it can be worn as a neck knife. *Blade has a flat back Specifications: - Blade: 3 " - Overall: 5" - Thick: 4.6mm - Weight: 2.5oz - AUS 8A Stainless steel blades with Kraton handles. - Secure-Ex boot/belt sheath
Price: $84.95



COLD STEEL 12CT SAFE KEEPER III

Safe Keeper III Specifications: - Blade Length: 2 1/2" - Overall Length: 5" - Steel: Japanese AUS 8A Stainless - Weight: 3.5 oz - Handle: 1 3/4" Long Kraton - Sheath: Secure-Ex Sheath
Price: $49.95



COLD STEEL 13BN MASTER TANTO

Same features as the regular Tanto, except the Master Tanto has a San Mai III blade, making it approximately 25% stronger. Exhibiting an unequaled level of craftsmanship, the Tanto features a lustrous satin finish on the hollow ground blade bevels and a line grain finish on the flat spine. Stainless steel guard, handle is deeply checkered and oval, so it's very comfortable and won't roll or twist in the hand. Massive blade extends through the interior of the handle to the pommel for maximum strength. Non-slip grip won't warp, rot, crack or mildew. Comes with a Black Leather Sheath. Specifications: - Weight: 9.5 oz - Blade Thickness: 3/16" - Blade Length: 6" - Handle: 5 1/2" - Steel: San Mai III - Overall Length: 11 1/2" - All handles are Kraton
Price: $324.95



COLD STEEL 13D TAI PAN 7.5" KRATON HANDLE

The Tai Pan embodies all the best features of a classic dagger while minimizing its shortcomings. Most daggers are notorious for thin, easily broken points. In contrast, the Tai Pan features a sturdy spear point which is wide and thick enough to resist breaking. As with the Tanto, the Tai Pan features a tapered, black Kraton handle with a unique flattened oval cross section. Over time, this material and handle shape have proven ideal at preventing the knife from shifting or turning in the hand even under the worst circumstances. Specifications: - Blade: 7 1/2" - Handle: 5 1 /2 - Overall: 13" - Thick: 3/16" - Weight: 10.8oz. - Steel: VG-1 San Mai III
Price: $424.95



Showing 1 - 10 of 958 Results

1 2 3 4 5 6 7 8 9 10 Next >