Chainsaw Chain Grinder Comparison

5 Products Found

STENS 700-010 Chain Grinder Super Jolly w/hydraulic clamp for Chainsaws


Grind all types of chain, from 1/4"-3/4" pitch
Equipped with a semi-automatic hydraulic chain clamp vise
Reduces steps required allowing the operator to index chain faster
Sharpening time can be reduced as much as half
Comes with 3 grinding wheels: 3.2mm for 1/4", 3/8" LP, 4.7mm for .325", 3/8" and .404" and 8mm for 3/4" pitch
Includes wheel dressing brick, wheel gauges, and hex wrenches for changing wheels
Powerful 300 watt/3400 RPM direct-drive, ball bearing mounted motor
Special tilting vise pivots to provide additional 10 degree horizontal angle for sharpening chisel chain
Built in lamp
Mounts on bench or wall

Uses 700-102 Chain Grinding Wheel
Uses 700-106 Chain Grinding Wheel
Uses 700-110 Chain Grinding Wheel

Oregon 310-120 Bench Minigrinder, 120V for Chainsaws


FITS OREGON AFTERMARKET.

Oregon 410-120 Bench Grinder, Standard 120V for Chainsaws


Mid-Sized, Saw Chain Bench Grinder

Introducing the 410-series, mid-size grinder that provides the quality you can trust from Oregon at an exceptional value. This grinder mounts to either a bench or wall and sharpens up to .404" pitch chain.

Mid-Sized, Saw Chain Bench Grinder

Single phase, direct-drive, one-way, 120V, 60Hz, 1.2A, 140W, 3500 RPM, 0.4 HP motor. Manual chain‑clamping vise. Grinds 1/4", 3/8" Low Profile, .325", 3/8", & .404" pitch saw chain out of the box.

Weight: 17 lbs., height: 16"
FEATURES:
- Built-in light
- Bench or wall mount
- One-way motor rotation for safe operation
- Easy-to-use adjustments

Oregon 520-120 Bench Grinder, Premium 120V for Chainsaws


Our 520-series saw chain grinder combines premium quality and ease of use for high volume sharpening. In addition to a sharp new design, the 520 features a newly engineered vise for improved performance on chains up to .404" pitch*.

Saw Chain Bench Grinder
Single phase, direct-drive, one-way, 120V, 60Hz, 4.3A, 300W, 3400 RPM, 0.4 HP motor. Manual chain‑clamping vise. Grinds 1/4", 3/8" Low Profile, .325", 3/8", & .404" pitch saw chain out of the box*.

Weight: 20 lbs., height: 19-1/2"

FEATURES:
- Grinding wheel wear adjustment
- Indexing chain stop assembly
- Motor-head release button
- Longer, self-centering vise
- Forward/aft sliding vise
- Built-in light

*To grind 3/4" pitch saw chain on the 520-120, use Oregon 571887 (3/4" pitch vise adaptor kit) and OR534-516 (5-3/4" dia. grinding wheel). Both are available as separate accessories.

Oregon 590246 AUTO CHAIN GRINDER, DONUT WEIGHT for Chainsaws


Fits Oregon Aftermarket.

Showing 5 Products