Husqvarna Chainsaw Chain

174 Products Found

STENS 089-400 CARLTON CHAIN REEL 100 FT for Husqvarna


- Length:100 FT
- Type:Chisel Standard
- Pitch:.404
- Gauge:.063

REPLACES:

• CARLTON B3LM-100R
• GB B63C-1P100
• HUSQVARNA 503 30 77-01
• SANDVIK 63BL100R
• and others

STENS 089-5257 Silver Streak Chain Reel 25 ft for Husqvarna


- Pitch: .404
- Gauge: .063
- Length: 25 ft
- Includes side straps, preset straps and 10 pre-cut loop boxes
- Type: Semi-Chisel Standard

REPLACES:

• CARLTON B3EP-25R
• GB B63S-1P25
• HUSQVARNA 503306425
• HUSQVARNA 5033064-25
• HUSQVARNA 503 30 64-25
• SANDVIK 63B25R
• and others

STENS 091-310 Carlton Saw Chain 100 FT Semi-ch for Husqvarna


Gauge: .050
Length: 100 FT
Pitch: 3/8
Type: Semi-Chisel Reduced Kickback

REPLACES:
CARLTON A1EP-GL-100U
CARLTON A1EP-GL100R
HUSQVARNA 503 30 33-22
and others

STENS 091-3107 Silver Streak Chain Reel 100 ft for Husqvarna


- Pitch: 3/8
- Gauge: .050
- Length: 100 ft
- Includes side straps, preset straps and 30 pre-cut loop boxes
- Type: Semi-Chisel Reduced Kickback

REPLACES:

• CARLTON A1EP-GL100R
• HUSQVARNA 503303322
• HUSQVARNA 5033033-22
• HUSQVARNA 503 30 33-22
• SANDVIK 50AG100R
• and others

STENS 092-325 Carlton Saw Chain 25 ft - 3/8 PITCH/.050 GAUGE for Husqvarna


Gauge: .050
Length: 25 ft
Pitch: 3/8"
Type: Chisel Standard
Includes side straps, preset straps and pre-cut loop boxes

Replaces:

• Carlton: A1LM-025U, A1LM-25R
• GB: A50C-1P25
• Husqvarna: 503 30 79-25
• Oregon: 72LG-025U, 72LGX025U
• Sabre: 980-256R
• and others

STENS 092-3257 Silver Streak Chain Reel 25 ft for Husqvarna


- Pitch: 3/8
- Gauge: .050
- Length: 25 ft
- Includes side straps, preset straps and 10 pre-cut loop boxes
- Type: Chisel Standard

REPLACES:

• CARLTON A1LM-25R
• GB A50C-1P25
• HUSQVARNA 503307925
• HUSQVARNA 5033079-25
• HUSQVARNA 503 30 79-25
• SABRE 980-256R
• SANDVIK 50AL25R
• and others

Stens 092-372 Carlton Pre-Cut Chain 72 for Husqvarna


Gauge: .050
Drive Links: 72
Pitch: 3/8"
Type: Chisel Standard

Replaces:

• Carlton: A1LM-72 ST, A1LM-72E, A1LM-72E ST
• GB: A50C-1PL72
• Husqvarna: 501 84 26-72
• Oregon: 59-195, 72LG072G, 72LGX072G
• and others

Stens 092-410 Carlton Chain Reel 100 Ft 3/8, .058, Std Chisel for Husqvarna


- Length:100'
- Type:Chisel Standard
- Pitch:3/8
- Gauge:.058

REPLACES:

• CARLTON A2LM-100R
• GB A58C-1P100
• HUSQVARNA 503 30 81-01
• SABRE J2-L7110-AS
• SANDVIK 58AL100R
• STIHL 35RS 100R
• and others

STENS 092-425 Carlton Saw Chain 25 ft - 3/8 PITCH/.058 GAUGE for Husqvarna


Gauge: .058
Length: 25 ft
Pitch: 3/8"
Type: Chisel Standard
Includes side straps, preset straps and pre-cut loop boxes

Replaces:

• Carlton: A2LM-025U, A2LM-25R
• GB: A58C-1P25
• Husqvarna: 503 30 81-25
• Oregon: 58-042, 73LG-025U, 73LGX025U
• and others

STENS 092-4257 Silver Streak Chain Reel 25 ft for Husqvarna


- Pitch: 3/8
- Gauge: .058
- Length: 25 ft
- Includes side straps, preset straps and 10 pre-cut loop boxes
- Type: Chisel Standard

REPLACES:

• CARLTON A2LM-25R
• GB A58C-1P25
• HUSQVARNA 503308125
• HUSQVARNA 5033081-25
• HUSQVARNA 503 30 81-25
• SANDVIK 58AL25R
• and others

Stens 092-492 Carlton Chain Pre-Cut Loop 92Dl 3/8, .058, Chisel Standard for Husqvarna


Gauge: .058"
Drive Links: 92
Pitch: 3/8"
Type: Chisel
File Size: 7/32"

REPLACES:
- Carlton A2LM-92
- GB A58C-1PL92
and others

FITS:
- Dolmar PS6400, PS6400H, PS6400W, PS7300, PS7300H, PS7300W, PS7310, PS730H, PS7900, PS7900H, PS7900W, PS7910, PS7910H, PS7910W, PS7910XD, PS9000, PS9010 and PS9010F
- Efco 181, MT820 and MT7200
- Husqvarna L series 65, 66, 70, 77, 61, 160, 162, 181, 185, 260, 266, 268, 271, 281, 285, 288 XP Lite, 298, 365, 371, 372, 372 XP, 380, 385, 385 XP, 390 XP, 394, 395, 395 XP, 480, 562 XP, 570, 575 XP, 576 XP, 1100, 2100, 2101, 3120 and 3120 XP
- Jonsered 625, 630, 670, 2065, 2071, 2077, 2083, 21094, 2095, 2171, CS2165, CS2171, CS2186 and CS2188
- Makita DCS6401, DCS6421, DCS7301, DCS7901, DCS9000 and DCS9010FL
- Shindaiwa 550, 575, 577, 680, 695 and 757
- Solo 603, 662, 665, 667, 670, 675, 680, 681, 690 and 694
and others

STENS 092-525 Carlton Saw Chain 25 ft - 3/8 in PITCH, .063 GAUGE for Husqvarna


Gauge: .063
Length: 25 '
Pitch: 3/8"
Type: Chisel Standard
Includes side straps, preset straps and pre-cut loop boxes

Replaces:

• Carlton: A3LM-025U, A3LM-25R
• GB: A63C-1P25
• Husqvarna: 501 98 24-25
• Oregon: 75LG-025U, 75LGX-025U, 75LGX025U
• and others

STENS 092-5257 Silver Streak Chain Reel 25 ft for Husqvarna


- Pitch: 3/8
- Gauge: .063
- Length: 25 ft
- Includes side straps, preset straps and 10 pre-cut loop boxes
- Type: Chisel Standard

REPLACES:

• CARLTON A3LM-25R
• GB A63C-1P25
• HUSQVARNA 501982425
• HUSQVARNA 5019824-25
• HUSQVARNA 501 98 24-25
• SANDVIK 63AL25R
• and others

STENS 092-800 Carlton Saw Chain 100 ft - 3/8 PITCH/.063 GAUGE for Husqvarna


Gauge: .063
Length: 100 '
Pitch: 3/8"
Type: Chisel Standard
Includes side straps, preset straps and pre-cut loop boxes

Replaces:

• Carlton: A3LM-100R, A3LM-100U
• Husqvarna: 501 98 24-01
• Oregon: 75LGX-100U, 75LGX100U
• and others

STENS 093-3257 Silver Streak Chain Reel 25 ft for Husqvarna


- Pitch: 3/8
- Gauge: .050
- Length: 25 ft
- Includes side straps, preset straps and 10 pre-cut loop boxes
- Type: Chisel Reduced Kickback

REPLACES:

• CARLTON A1LM-GL-25R
• HUSQVARNA 503308225
• HUSQVARNA 5033082-25
• HUSQVARNA 503 30 82-25
• SANDVIK 50ALG25R
• and others

STENS 094-3527 Silver Streak Chain Loop 52dl for Husqvarna


- Pitch: 3/8 LP
- Drive Links: 52
- Gauge: .050
- Type: Semi-Chisel Standard

REPLACES:

• CARLTON N1C-52E
• GB R50S-1PL52
• HUSQVARNA: 501847052
• HUSQVARNA: 5018470-52
• HUSQVARNA: 501 84 70-52
• SANDVIK 50R52
• and others

STENS 097-310 CHAIN REEL 100 FT .325, .050, S-CHISEL REDUCED KICK for Husqvarna


- Length:100'
- Type:Semi-Chisel Reduced Kickback
- Pitch:.325
- Gauge:.050

REPLACES:

• CARLTON K1C-BL-100R
• HUSQVARNA 503 30 67-01
• MCCULLOCH PMG320GLX
• SABRE 520D
• SANDVIK 50JG100R
• STIHL 23RM 100R
• and others

STENS 097-3107 CHAIN REEL 100 FT .325, .050, REDUCED KICK for Husqvarna


- Length:100'
- Type:Semi-Chisel Reduced Kickback
- Pitch:.325
- Gauge:.050
- Includes side straps, preset straps and 30 pre-cut loop boxes

REPLACES:

• CARLTON K1C-BL-100R
• HUSQVARNA 503 30 67-01
• MCCULLOCH PMG320GLX
• SABRE 520D
• SANDVIK 50JG100R
• STIHL 23RM 100R
• and others

- Uses our 705-161 Carlton File-o-plate

STENS 097-325 Carlton Saw Chain 25 FT Semi-chi for Husqvarna


Gauge: .050
Length: 25 '
Pitch: .325
Type: Semi-Chisel Reduced Kickback

REPLACES:
CARLTON K1C-BL-025U
CARLTON K1C-BL-25R
CARLTON K1C-BL-25U
HUSQVARNA 503 30 67-25
SABRE 520D-25R
and others

STENS 097-3257 Silver Streak Chain Reel 25 ft for Husqvarna


- Pitch: .325
- Gauge: .050
- Length: 25 ft
- Includes side straps, preset straps and 10 pre-cut loop boxes
- Type: Semi-Chisel Reduced Kickback

REPLACES:

• CARLTON K1C-BL-25R
• HUSQVARNA 503306725
• HUSQVARNA 5033067-25
• HUSQVARNA 503 30 67-25
• SABRE 520D-25R
• SANDVIK 50JG25R
• and others

STENS 097-410 CHAIN REEL 100 FT .325, .058, S-CHISEL REDUCED KICK for Husqvarna


- Length:100'
- Type:Semi-Chisel Reduced Kickback
- Pitch:.325
- Gauge:.058

REPLACES:

• CARLTON K2C-BL-100R
• HUSQVARNA 503 30 55-01
• MCCULLOCH PMG328GLX
• SABRE 528D
• SANDVIK 58JG100R
• STIHL 25RM1
• and others

STENS 097-4107 CHAIN REEL 100 FT .325, .058, REDUCED KICK for Husqvarna


- Length:100'
- Type:Semi-Chisel Reduced Kickback
- Pitch:.325
- Gauge:.058
- Includes side straps, preset straps and 30 pre-cut loop boxes

REPLACES:

• CARLTON K2C-BL-100R
• HUSQVARNA 503 30 55-01
• MCCULLOCH PMG328GLX
• SABRE 528D
• SANDVIK 58JG100R
• STIHL 25RM1
• and others

- Uses our 705-161 Carlton File-o-plate

STENS 097-4257 CHAIN REEL 25 FT .325, .058, S-CHISEL REDUCED KICK for Husqvarna


- Length:25'
- Type:Semi-Chisel Reduced Kickback
- Pitch:.325
- Gauge:.058
- Includes side straps, preset straps and 10 pre-cut loop boxes

REPLACES:

• CARLTON K2C-BL-25R
• HUSQVARNA 503 30 55-25
• MCCULLOCH PMG328GLX
• SABRE 528D
• SANDVIK 58JG25R
• STIHL 25RM1
• and others

- Uses our 705-161 Carlton File-o-plate

STENS 099-4107 CHAIN REEL 100 FT .325, .058, CHISEL REDUCED KICK for Husqvarna


- Length:100'
- Type:Chisel Reduced Kickback
- Pitch:.325
- Gauge:.058
- Includes side straps, preset straps and 30 pre-cut loop boxes

REPLACES:

• CARLTON K2L-BL-100R
• HUSQVARNA 503 30 57-01
• MCCULLOCH SPR328GLX
• SABRE 928D
• SANDVIK 58JL100R
• STIHL 25RS1
• and others

- Uses our 705-165 Carlton File-o-plate

STENS 099-4257 CHAIN REEL 25 FT .325, .058, CHISEL REDUCED KICK for Husqvarna


- Length:25'
- Type:Chisel Reduced Kickback
- Pitch:.325
- Gauge:.058
- Includes side straps, preset straps and 10 pre-cut loop boxes

REPLACES:

• CARLTON K2L-BL-25R
• HUSQVARNA 503 30 57-25
• MCCULLOCH SPR328GLX
• SABRE 928D
• SANDVIK 58JL25R
• STIHL 25RS1
• and others

- Uses our 705-165 Carlton File-o-plate

STENS 099-5107 CHAIN REEL 100 FT .325, .063, REDUCED KICK for Husqvarna


- Length:100'
- Type:Chisel Reduced Kickback
- Pitch:.325
- Gauge:.063
- Includes side straps, preset straps and 30 pre-cut loop boxes

REPLACES:

• CARLTON K3L-BL-100R
• HUSQVARNA 503 30 73-01
• MCCULLOCH SPR323GLX
• SABRE 923D
• SANDVIK 63JL100R
• STIHL 26RS1
• and others

- Uses our 705-165 Carlton File-o-plate

STENS 099-5257 CHAIN REEL 25 FT .325, .063, CHISEL REDUCED KICK for Husqvarna


- Length:25'
- Type:Chisel Reduced Kickback
- Pitch:.325
- Gauge:.063
- Includes side straps, preset straps and 10 pre-cut loop boxes

REPLACES:

• CARLTON K3L-BL-25R
• HUSQVARNA 503 30 73-25
• MCCULLOCH SPR323GLX
• SABRE 923D
• SANDVIK 63JL25R
• STIHL 26RS1
• and others

- Uses our 705-165 Carlton File-o-plate

Oregon 20BPX066G 16 Inch .325 Micro Chisel Chainsaw Chain for Husqvarna


SPECIFICATIONS: - PITCH: .325
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 066
- DRIVE TEETH: 7

REPLACES:

• Echo 20BPX66CQ
• ECHO 33SL66CQ
• EFCO 20BPX066X
• OREGON 20BP066G
• OREGON 20BPX066
• OREGON 20BPX066CK
• OREGON 33SL066G
• OREGON 33SLO-66G
• Redmax 574 09 41-01
• SHINDAIWA 33SL0-66X
• TANAKA 33LG066X
• TANAKA 33SL066X
• and others

FITS:
- Echo CS-440, CS-450, CS-510, CS-530
- Efco 147, 152, MT 5200
- Redmax G 5000, G 5000 AVS, G 5300
- Shindaiwa 360, 366, 377, 400, 415, 416, 446s, 450, 451, 488, 488s, 500
- Tanaka ECS-415, ECS-4000, ECS-4000B, ECV-4501, TCS40EA, TCS51EAP
- and others

Oregon 20BPX072G 18 Inch .325 Micro Chisel Chainsaw Chain Loop for Husqvarna


- PITCH: .325"
- GAUGE: .050
- BAR LENGTH: 18"
- DRVIE LINKS: 072
- DRIVE TEETH: 7

REPLACES:
- Echo 20BPX72CQ, 33SL72CQ
- Efco 20BPX072X
- Oregon 20BPX072CK, 33SL072G
- Redmax 576 12 70-01
- and others

FITS:
- Cub Cadet CS5018, CS5220
- Dolmar 109, 110, 111, 115, 115I, PS-460, PS-510, PS-540, PS-5100S, PS-5105, PS-5105H; SOME OF THESE SAWS MAY TAKE A 3/8 PITCH CHAIN
- Echo CS-400EVL, CS-440, CS-440EVL, CS-510, CS-520, CS-3600, CS-3900, CS-4000, CS-4100, CS-4400, CS-4500, CS-4600, CS-5000
- Echo CS-440, CS-450, CS-450P, CS-500P, CS-510, CS-530, CS-550P
- Efco 147, 152, MT 5200
- Homelite 25, 27, 4100, 4150, 4500, 4550, D4550B, I3850B, I4150B, I4550B, SUPER 240, TIMBERMAN, UT10518, UT10519, UT10520, ZR10520, UT10522, ZR10522, UT10526, UT10550, UT10552, UT10896, UT10910, UT10927A, UT10942A, UT10946A; SOME SAWS MAY TAKE 3/8 PITCH CHAIN
- Husqvarna 33, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 133, 154, 234, 238, 242, 246, 254, 257, 261, 262, 336, 340, 345, 346, 350, 351, 353, 242XP, 254XP, 262XP, 339XP, 346XP, 346XP E-TECH, 346XPG, 353 E-TECH, 353G E-TECH, 357XP, 357XPG, 359, 359 E-TECH, 360, 435, 435E, 440E, 444, 445, 445E, 450, 450 50TH ANNIVERSARY, 450E, 455, 455E RANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 545, 550XP, 550XPG
- Husqvarna 36, 41, 136, 141, 142; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Husqvarna 362, 362XP
- John Deere 45EV, 46EV, 300CS, 450V, CS46, CS52
- John Deere CS56, CS62; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS
- Jonsered 2050, 2050 TURBO, 2051, 2054, 2055, 2149, 2149 TURBO, 370, 410, 420, 425, 435, 45, 450, 451, 455, 49, 50, 51, 510, 52, 521, 525, 535, CS2145, CS2149 TURBO, CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C, CS2159WH, CS2163, CS2240, CS2245, CS2250, CS2250S, CS2255; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Jonsered 2014, 2016, 2036, 2036 TURBO, 2040, 2040 TURBO, 2041, 2045, 2141, CS 2141; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Makita DCS 460, DCS 510, DCS 430, DCS 431, DCS5121, DCS 520I, DCS 540, DCS 5200I; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS
- McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS 2049 AVCC, MS 2050, PM 1845 AV, PRO MAC: 40, 46; SILVER EAGLE: 2818, 3020; TIMBER BEAR 20 (LATER MODELS)
- Olympyk (Oleo-Mac) 938, 940C, 941, 945, 950, 951, 956, 962
- Partner P-360, P-400, P-450, P-500, P-5000
- Pioneer 1074, P-21, P-26, P-28
- Poulan 285, 295, 305, 306SA, 310, 315, 325, 335 PREDATOR, 336, 2700, 2750, 2775, 2800, 2900 FARM HAND, 3000, 3050, 3100, 3300, 4600, 4620, 4620AV, 4620AVX; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Powerhorse 190502, 190503, 190557, 190559
- Redmax G390, G450AVS, G455AVS, G5000, G5000AVS, G5300
- Remington RM5118, RM5520
- Sears-Craftsman 35020, 35021, 35119, 35120, 35121, 35492, 35607, 35628, 35633
- Shindaiwa 360, 366, 377, 400, 415, 416, 446S, 450, 451, 488, 488S, 490, 500; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS
- Solo 613, 614, 631, 632, 634, 638, 639, 641, 644, 645, 647, 650, 651, 652, 651SP, 654, 656, 656SP
- Tanaka ECS-415, ECS-4000, ECS-4000B, ECV-4501, ECV-5601, TCS40EA, TCS51EAP
- Troy-Bilt TB5518
and others

Oregon 20BPX078G 20 Inch .325 Micro Chisel Chainsaw Chain Loop for Husqvarna


SPECIFICATIONS: - PITCH: .325
- GAUGE: .050
- BAR LENGTH: 20"
- DRVIE LINKS: 078
- DRIVE TEETH: 7

REPLACES:

• ECHO 20BPX78CQ
• ECHO 33SL78CQ
• EFCO 20BPX078X
• OREGON 20BP078G
• OREGON 20BPX078
• OREGON 20BPX078CK
• OREGON 33SL078G
• REDMAX 576 12 71-01
• SHINDAIWA 33SL0-78X
• TANAKA 33SL078X
• and others

FITS:
- Cub Cadet CS5018, CS5220
- Dolmar 109, 110, 111, 115, 115I, PS-460, PS-510, PS-540, PS-5100S, PS-5105, PS-5105H; SOME OF THESE SAWS MAY TAKE A 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS
- Echo CS-400EVL, CS-440, CS-440EVL, CS-510, CS-520, CS-3600, CS-3900, CS-4000, CS-4100, CS-4400, CS-4500, CS-4600, CS-5000
- Echo CS-440, CS-450, CS-450P, CS-500P, CS-510, CS-530, CS-550P
- Efco 147, 152, MT 5200
- Homelite 25, 27, 4100, 4150, 4500, 4550, D4550B, I3850B, I4150B, I4550B, SUPER 240, TIMBERMAN, UT10518, UT10519, UT10520, ZR10520, UT10522, ZR10522, UT10526, UT10550, UT10552, UT10896, UT10910, UT10927A, UT10942A, UT10946A; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS
- Husqvarna 33, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 133, 154, 234, 238, 242, 246, 254, 257, 261, 262, 336, 340, 345, 346, 350, 351, 353, 242XP, 254XP, 262XP, 339XP, 346XP, 346XP E-TECH, 346XPG, 353 E-TECH, 353G E-TECH, 357XP, 357XPG, 359, 359 E-TECH, 360, 435, 435E, 440E, 444, 445, 445E, 450, 450 50TH ANNIVERSARY, 450E, 455, 455E RANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 545, 550XP, 550XPG
- Husqvarna 36, 41, 136, 141, 142; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Husqvarna 362, 362XP
- John Deere 45EV, 46EV, 300CS, 450V
- John Deere CS56, CS62; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Jonsered 2050, 2050 TURBO, 2051, 2054, 2055, 2149, 2149 TURBO, 370, 410, 420, 425, 435, 45, 450, 451, 455, 49, 50, 51, 510, 52, 521, 525, 535, CS2145, CS2149 TURBO, CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C, CS2159WH, CS2163, CS2240, CS2245, CS2250, CS2250S, CS2255; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Jonsered 2014, 2016, 2036, 2036 TURBO, 2040, 2040 TURBO, 2041, 2045, 2141, CS 2141; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Makita DCS 460, DCS 510, DCS 430, DCS 431, DCS5121, DCS 520I, DCS 540, DCS 5200I; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS 2049 AVCC, MS 2050, PM 1845 AV, PRO MAC: 40, 46; SILVER EAGLE: 2818, 3020; TIMBER BEAR 20 (LATER MODELS)
- Olympyk (Oleo-Mac0 938, 940C, 941, 945, 950, 951, 956, 962
- Partner P-360, P-400, P-450, P-500, P-5000
- Pioneer 1074, P-21, P-26, P-28
- Poulan 285, 295, 305, 306SA, 310, 315, 335 PREDATOR, 336, 2700, 2750, 2775, 2800, 2900 FARM HAND, 3000, 3050, 3100, 3300, 4600, 4620, 4620AV, 4620AVX; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Poulan 325
- Powerhouse 190502, 190503, 190557, 190559
- Redmax G390, G450AVS, G455AVS, G5000, G5000AVS, G5300
- Remington RM5118, RM5520
- Sears-Craftsman 35020, 35021, 35119, 35120, 35121, 35492, 35607, 35628, 35633
- Shindaiwa 366, 377, 400, 415, 416, 446S, 450, 451, 488, 488S, 490, 500; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Stanley Hydraulic CS05, CS06; SOME SAWS MAY TAKE 3/8 PITCH CHAIN, SEE OTHER APPLICATIONS.
- Tanaka ECS-415, ECS-4000, ECS-4000B, ECV-4501, ECV-5601, TCS40EA, TCS51EAP
- Troy-Bilt TB5518
and others

Oregon 20LPX066G 16 Inch .325 Super 20 Chisel Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 66
- DRIVE TEETH: 7

REPLACES:
- Echo 20LPX66CQ
- Redmax 574 09 41-01
- and others

FITS:
- Dolmar 109, 110, 111, 115, 115i, PS-460, PS-510, PS-540, PS-5100S, PS-5105, PS-5105H, PS-6100, PS-6100H
- Echo CS-450, CS-450P, CS-490, CS-500P, CS-530, CS-550P, CS-400EVL, CS-440, CS-440EVL, CS-510, CS-520, CS-3600, CS-3900, CS-4000, CS-4100, CS-4400, CS-4500, CS-4600, CS-5000
- Efco 147, 152, MT 5200
- Homelite 25, 27, 4100, 4150, 4500, 4550, d4550b, i3850b, i4150b, i4550b, Super 240, Timberman, UT10518, UT10519, UT10520, ZR10520, UT10522, UT10526, UT10550, UT10552, UT10896, UT10910, UT10927A, UT10942A, UT10946A, ZR10522
- Husqvarna 36, 41, 136, 141, 235, 235E, 240, 240E, 51, 55, 55 Rancher, 57, 254, 254XP, 257, 261, 262, 262XP, 336, 338XPT, 339XP, 357XP, 357XPG, 359, 359 E-Tech, 362, 362XP, 455, 455 Rancher, 455e Rancher, 460, 460 Rancher, 555, 560XP, 560XPG
- John Deere 45EV, 46EV, 300CS, 450V, CS46, CS52, CS56, CS62
- Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 510, 521, 525, 535, 2014, 2016, 2036, 2036 Turbo, 2040, 2040 Turbo, 2041, 2045, 2141, CS 2141, 2050, 2050 Turbo, 2051, 2054, 2055, 2149, 2149 Turbo, CS2145, CS2149 Turbo, CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C, CS2159WH, CS2163, CS2240, CS2245, CS2250, CS2250S, CS2252, CS2253, CS2253WH, CS2255, CS2258, CS2260, CS2260WH
- Makita DCS 430, DCS 431, DCS 460, DCS 510, DCS 5121, DCS 520i, DCS 540, DCS 5200, EA5000P53G
- McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS 2049 AVCC, MS 2050, PM 1845 AV, Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear 20 (Later models)
- Olympk 938, 940C, 941, 945, 950, 951, 956, 962
- Partner P-360, P-400, P-450, P-500, P-5000
- Pioneer 1074, P-21, P-26, P-28
- Poulan 285, 295, 305, 306SA, 310, 315, 325, 335 Predator, 336, 2700, 2750, 2775, 2800, 2900 Farm Hand, 3000, 3050, 3100, 3300, 4600, 4620, 4620AV, 4620AVX
- Redmax G390, G450AVS, G455AVS, G5000, G5000AVS, G5300
- Remington RM4618, RM4620, RM5118, RM5520
- Sears Craftsman 35020, 35021, 35119, 35120, 35121, 35492, 35607, 35628, 35633
- Shindaiwa 366, 377, 415, 446s, 450, 451, 488, 488S, 490, 500
- Solo 651, 651SP, 652, 656, 656SP
- Tanaka ECS-415, ECS-4000, ECS-4000B, ECV-4501, ECV-5601, TCS40EA, TCS51EAP
- Troy-Bilt TB5518
- and others

Oregon 20LPX072G 18 Inch .325 Super 20 Chisel Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 72
- DRIVE TEETH: 7

REPLACES:
- Echo 20LPX72CQ
- Redmax 576 12 70-01
- and others

FITS:
- Cub Cadet CS5018, CS5220
- Dolmar 109, 110, 111, 115, 115i, PS-460, PS-510, PS-540, PS-5100S, PS-5105, PS-5105H, PS-6100, PS-6100H
- Echo CS-450, CS-450P, CS-490, CS-500P, CS-530, CS-550P, CS-400EVL, CS-440, CS-440EVL, CS-510, CS-520, CS-3600, CS-3900, CS-4000, CS-4100, CS-4400, CS-4500, CS-4600, CS-5000
- Efco 147, 152, MT 5200
- Homelite 25, 27, 4100, 4150, 4500, 4550, d4550b, i3850b, i4150b, i4550b, Super 240, Timberman, UT10518, UT10519, UT10520, ZR10520, UT10522, UT10526, UT10550, UT10552, UT10896, UT10910, UT10927A, UT10942A, UT10946A, ZR10522
- Husqvarna 36, 41, 136, 141, 235, 235E, 240, 240E, 51, 55, 55 Rancher, 57, 254, 254XP, 257, 261, 262, 262XP, 336, 357XP, 357XPG, 359, 359 E-Tech, 362, 362XP, 455, 455 Rancher, 455e Rancher, 460, 460 Rancher, 555, 560XP, 560XPG
- John Deere 45EV, 46EV, 300CS, 450V, CS46, CS52, CS56, CS62
- Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 510, 521, 525, 535, 2050, 2050 Turbo, 2051, 2054, 2055, 2149, 2149 Turbo, CS2145, CS2149 Turbo, CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C, CS2159WH, CS2163, CS2240, CS2245, CS2250, CS2250S, CS2252, CS2253, CS2253WH, CS2255, CS2258, CS2260, CS2260WH, 2014, 2016, 2036, 2036 Turbo, 2040, 2040 Turbo, 2041, 2045, 2141, CS 2141
- Makita DCS 430, DCS 431, DCS 460, DCS 510, DCS 5121, DCS 520i, DCS 540, DCS 5200, EA5000P53G
- McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS 2049 AVCC, MS 2050, PM 1845 AV, Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear 20 (Later models)
- Olympyk 938, 940C, 941, 945, 950, 951, 956, 962
- Partner P-360, P-400, P-450, P-500, P-5000
- Pioneer 1074, P-21, P-26, P-28
- Poulan 285, 295, 305, 306SA, 310, 315, 325, 335 Predator, 336, 2700, 2750, 2775, 2800, 2900 Farm Hand, 3000, 3050, 3100, 3300, 4600, 4620, 4620AV, 4620AVX
- Powerhouse 190502, 190503, 190557, 190559
- Redmax G390, G450AVS, G455AVS, G5000, G5000AVS, G5300
- Remington RM4618, RM4620, RM5118, RM5520
- Sears Craftsman 35020, 35021, 35119, 35120, 35121, 35492, 35607, 35628, 35633, 38188
- Shindaiwa 366, 377, 415, 446s, 450, 451, 488, 488S, 490, 500
- Solo 651, 651SP, 652, 656, 656SP
- Tanaka ECS-415, ECS-4000, ECS-4000B, ECV-4501, ECV-5601, TCS40EA, TCS51EAP
- Troy-Bilt TB5518
- and others

Oregon 20LPX078G 20 Inch .325 Super 20 Chisel Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 20"
- DRIVE LINKS: 78
- DRIVE TEETH: 8

REPLACES:
- Echo 20LPX78CQ
- and others

FITS:
- Echo CS-450P, CS-500P, CS-550P
- STIHL MS360
-
and others

OREGON 21BPX056G MICRO CHISEL CHAIN .325" for Husqvarna


- PITCH: .325
- GAUGE: .058
- BAR LENGTH: 13"
- DRIVE LINKS: 56
- DRIVE TEETH: 7

Oregon 21BPX064G 15 Inch .325" Micro Chisel Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .058
- BAR LENGTH: 15"
- DRIVE LINKS: 64
- DRIVE TEETH: 8

REPLACES:
- Dolmar 523 086 064
- and others

FITS:
- Dolmar PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100
- and others

Oregon 21BPX066G 16 Inch .325 Micro Chisel Chainsaw Chain for Husqvarna


SPECIFICATIONS: - PITCH: .325
- GAUGE: .058
- BAR LENGTH: 16"
- DRIVE LINKS: 66
- DRIVE TEETH: 7

REPLACES:

• Dolmar 523 086 066
• EFCO 001000710R
• EFCO 21BPX066X
• OREGON 21BP066G
• OREGON 21BPX066
• OREGON 34SL066G
• and others

FITS:
- Dolmar PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100
- Efco 156, 165 (with .325" pitch)
- and others

Oregon 21BPX072G 18 Inch .325 Micro Chisel Chainsaw Chain for Husqvarna


SPECIFICATIONS: - PITCH: .325
- GAUGE: .058
- BAR LENGTH: 18"
- DRIVE LINKS: 72
- DRIVE TEETH: 8

REPLACES:

• Dolmar 523 086 072
• EFCO 001000711R
• EFCO 21BPX072X
• OREGON 21BP072G
• OREGON 34SL072G
• and others

FITS:
- Dolmar PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100
- Efco 156, 165 (with .325" pitch)
- and others

Oregon 21LPX064G 15 Inch .325 Super 20 Chisel Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .058
- BAR LENGTH: 15"
- DRIVE LINKS:
- DRIVE TEETH:

REPLACES:
- Dolmar 523 086 064
- and others

FITS:
- Dolmar PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100
- and others

Oregon 21LPX066G 16 Inch .325 Super 20 Chisel Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .058
- BAR LENGTH: 16"
- DRIVE LINKS: 66
- DRIVE TEETH: 7

REPLACES:
- Dolmar 523 086 066
- and others

FITS:
- Dolmar PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100
- and others

Oregon 21LPX072G 18 Inch .325 Super 20 Chisel Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .058
- BAR LENGTH: 18"
- DRIVE LINKS: 72
- DRIVE TEETH: 8

REPLACES:
- Dolmar 523 086 072
- and others

FITS:
- Dolmar PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100
- and others

OREGON 21LPX078G SUPER 20 CHISEL CHAIN .325" for Husqvarna


- PITCH: .325
- GAUGE: .058
- BAR LENGTH: 20"
- DRIVE LINKS: 78
- DRIVE TEETH: 7

OREGON 33SL066G PRO-GUARD CHISEL CHAIN .325" for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 066
- DRIVE TEETH: 7

FITS:
- Shindaiwa 360, 366, 377, 400, 415, 416, 446s, 450, 451, 488, 488s, 500
and others

OREGON 33SL072G PRO-GUARD CHISEL CHAINSAW CHAIN .325" for Husqvarna


- PITCH: .325"
- GAUGE: .050
- BAR LENGTH: 18"
- DRVIE LINKS: 072
- DRIVE TEETH: 7

FITS:
- Shindaiwa 360, 366, 377, 400, 415, 416, 446s, 450, 451, 488, 488s, 500
and others

OREGON 33SL078G PRO-GUARD CHISEL CHAIN .325" for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 20"
- DRVIE LINKS: 078
- DRIVE TEETH: 7

FITS:
- Shindaiwa 360, 366, 377, 400, 415, 416, 446s, 450, 451, 488, 488s, 500
- STIHL MS360 WITH 20" BAR
and others

HUSQVARNA 501840466 H25-66 (21BP-66) LOOP


A fast-cutting, low-vibration chain where cutters have small-radius working corners for fast cutting and easy sharpening. Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

66dl / .325"/ .058"

THIS PART ALSO REPLACES: AYP 501840466 Dixon 501840466 Poulan 501840466 and others

HUSQVARNA 501840472 H25-72 (21BP-72) LOOP


A fast-cutting, low-vibration chain where cutters have small-radius working corners for fast cutting and easy sharpening. Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

72dl / .325"/ .058"

THIS PART ALSO REPLACES: AYP 501840472 Dixon 501840472 Poulan 501840472 and others

HUSQVARNA 501840656 H30-56 CHAIN LOOP


A low kickback, low-vibration chain developed to meet the specific needs of todays lightweight chainsaws. It cuts a narrow kerf and requires less power from the saw than standard cutting systems. Not recommended for heavy duty work, e.g. storm damaged forests. Recommended for use on 35cc to 55cc saws. (Description shows: # drive links / pitch / gauge)

56dl / .325/ .050

THIS PART ALSO REPLACES: AYP 501840656 Dixon 501840656 Poulan 501840656 and others

HUSQVARNA 501840672 H30-72 CHAIN LOOP


A low kickback, low-vibration chain developed to meet the specific needs of todays lightweight chainsaws. It cuts a narrow kerf and requires less power from the saw than standard cutting systems. Not recommended for heavy duty work, e.g. storm damaged forests. Recommended for use on 35cc to 55cc saws. (Description shows: # drive links / pitch / gauge)

72dl / .325/ .050

THIS PART ALSO REPLACES: AYP 501840672 Dixon 501840672 Poulan 501840672 and others

HUSQVARNA 501840680 H30-80 CHAIN LOOP


A low kickback, low-vibration chain developed to meet the specific needs of todays lightweight chainsaws. It cuts a narrow kerf and requires less power from the saw than standard cutting systems. Not recommended for heavy duty work, e.g. storm damaged forests. Recommended for use on 35cc to 55cc saws. (Description shows: # drive links / pitch / gauge)

80dl / .325/ .050

THIS PART ALSO REPLACES: AYP 501840680 Dixon 501840680 Poulan 501840680 and others

Husqvarna 501840978 H22-78 (20Bp-78) Loop


A fast-cutting, low-vibration chain where cutters have small-radius working corners for fast cutting and easy sharpening.Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

78dl / .325" / .050"

THIS PART ALSO REPLACES: AYP 501840978 Dixon 501840978 Poulan 501840978 and others

HUSQVARNA 501841460 H42-60 CHAIN LOOP


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Round ground cutters an standard sequence. Recommended for professional use on 50cc to 100cc saws. (Description shows: # drive links / pitch / gauge)

60dl / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 501841460 Dixon 501841460 Poulan 501841460 and others

HUSQVARNA 501841468 H42-68 CHAIN LOOP


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Round ground cutters an standard sequence. Recommended for professional use on 50cc to 100cc saws. (Description shows: # drive links / pitch / gauge)

68dl / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 501841468 Dixon 501841468 Poulan 501841468 and others

HUSQVARNA 501841472 H42-72 CHAIN LOOP


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Round ground cutters an standard sequence. Recommended for professional use on 50cc to 100cc saws. (Description shows: # drive links / pitch / gauge)

72dl / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 501841472 Dixon 501841472 Poulan 501841472 and others

Husqvarna 501842145 Chainsaw Chain 36 (91Vg) 45E


A low-vibration and low kickback chain with Chamfer Chisel cutters. For woodcutters who use smaller-size saws in high-production environment. Recommended for professional use on saws up to 45cc.

45dl / 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 501842145 Dixon 501842145 Poulan 501842145 and others

Husqvarna 501842152 H36-52 Chainsaw Chain Loop


A low-vibration and low kickback chain with Chamfer Chisel cutters. For woodcutters who use smaller-size saws in high-production environment. Recommended for professional use on saws up to 45cc.

52dl / 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 501842152 Dixon 501842152 Poulan 501842152 and others

Husqvarna 501842156 H36-56 Chainsaw Chain Loop


A low-vibration and low kickback chain with Chamfer Chisel cutters. For woodcutters who use smaller-size saws in high-production environment. Recommended for professional use on saws up to 45cc.

56dl / 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 501842156 Dixon 501842156 Poulan 501842156 and others

HUSQVARNA 501842568 H46-68 CHAIN LOOP


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

68 DRIVE LINKS / .3/8"/ .050"

THIS PART ALSO REPLACES: AYP 501842568 Dixon 501842568 Poulan 501842568 and others

HUSQVARNA 501842605 H47-105 CHAIN LOOP


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

105 DRIVE LINKS / 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 501842605 Dixon 501842605 Poulan 501842605 and others

Husqvarna 501842815 H48-115 Chain Loop


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

115 DRIVE LINKS / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 501842815 Dixon 501842815 Poulan 501842815 and others

HUSQVARNA 501842884 H48-84 CHAIN LOOP


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

84 DRIVE LINKS / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 501842884 Dixon 501842884 Poulan 501842884 and others

HUSQVARNA 501846584 H80-84 CHAIN LOOP


A low kick-back, low-vibration chain recommended for use on 50cc to 100cc saws.

84 DRIVE LINKS / .3/8"/ .050"

THIS PART ALSO REPLACES: AYP 501846584 Dixon 501846584 Poulan 501846584 and others

HUSQVARNA 501846668 H81-68 CHAIN LOOP


A low kick-back, low-vibration chain recommended for use on 50cc to 100cc saws.

68 DRIVE LINKS / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 501846668 Dixon 501846668 Poulan 501846668 and others

HUSQVARNA 501846815 H83-115 CHAIN LOOP


A low-vibration square ground chain with Chisel cutters. Recommended for professional use on 50cc to 100cc saws.

115dl / 3/8"/ .063"
115 DRIVE LINKS

THIS PART ALSO REPLACES: AYP 501846815 Dixon 501846815 Poulan 501846815 and others

HUSQVARNA 501847045 H35/H36X-45 CHAIN LOOP


A low-vibration chain for woodcutters who use smaller-size saws in high-production environment. Recommended for professional use on saws up to 50cc. (Description shows: # drive links / pitch / gauge)

45dl / 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 501847045 Dixon 501847045 Poulan 501847045 and others

HUSQVARNA 501982401 H50-100U CHAIN 100 FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 100 feet / 3/8"/ .063"

THIS PART ALSO REPLACES: AYP 501982401 Dixon 501982401 Poulan 501982401 and others

HUSQVARNA 501982425 H50-25U CHAIN 25FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 25 feet / 3/8"/ .063"

THIS PART ALSO REPLACES: AYP 501982425 Dixon 501982425 Poulan 501982425 and others

HUSQVARNA 503303322 H51-100U CHAIN 100 FT


A high-performance, low-vibration chain with Semi-Chisel cutters for fast cutting and easy sharpening. Recommended for professional use on 50cc to 100cc saws.

Reel 100 feet/ .3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503303322 Dixon 503303322 Poulan 503303322 and others

HUSQVARNA 503303325 H51-100U CHAIN 25FT


A high-performance, low-vibration chain with Semi-Chisel cutters for fast cutting and easy sharpening. Recommended for professional use on 50cc to 100cc saws.

Reel 25 feet / .3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503303325 Dixon 503303325 Poulan 503303325 and others

HUSQVARNA 503305001 H54-100U CHAIN 100 FT


A high-performance, low-vibration chain with Semi-Chisel cutters for fast cutting and easy sharpening. Recommended for professional use on 50cc to 100cc saws.

Reel 100 feet/ 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 503305001 Dixon 503305001 Poulan 503305001 and others

HUSQVARNA 503305025 H54-100U CHAIN 25 FT


A high-performance, low-vibration chain with Semi-Chisel cutters for fast cutting and easy sharpening. Recommended for professional use on 50cc to 100cc saws.

Reel 25 feet / 3/8" / .058"

THIS PART ALSO REPLACES: AYP 503305025 Dixon 503305025 Poulan 503305025 and others

HUSQVARNA 503305501 H25-100U CHAIN 100 FT


A fast-cutting, low-vibration chain where cutters have small-radius working corners for fast cutting and easy sharpening. Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

Reel 100 feet / .325"/ .058"

THIS PART ALSO REPLACES: AYP 503305501 Dixon 503305501 Poulan 503305501 and others

HUSQVARNA 503305525 H25-25U CHAIN 25 FT


A fast-cutting, low-vibration chain where cutters have small-radius working corners for fast cutting and easy sharpening. Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

Reel 25 feet / .325"/ .058"

THIS PART ALSO REPLACES: AYP 503305525 Dixon 503305525 Poulan 503305525 and others

HUSQVARNA 503305725 H21-25U CHAIN 25 FT


A high-performance, low vibration chain with square-corner "chisel" cutters, ideal for professional users in demanding conditions. Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

Reel 25 feet / .325"/ .058"

THIS PART ALSO REPLACES: AYP 503305725 Dixon 503305725 Poulan 503305725 and others

HUSQVARNA 503305801 H30-100U CHAIN 100 FT


A low kickback, low-vibration chain developed to meet the specific needs of today's lightweight chainsaws. It cuts a narrow kerf and requires less power from the saw than standard cutting systems. Not recommended for heavy duty work, e.g. storm damaged forests. Recommended for use on 35cc to 55cc saws. (Description shows: # drive links / pitch / gauge)

Reel 100 feet / .325"/ .050"

THIS PART ALSO REPLACES: AYP 503305801 Dixon 503305801 Poulan 503305801 and others

HUSQVARNA 503305825 H30-25U CHAIN 25 FT


A low kickback, low-vibration chain developed to meet the specific needs of today's lightweight chainsaws. It cuts a narrow kerf and requires less power from the saw than standard cutting systems. Not recommended for heavy duty work, e.g. storm damaged forests. Recommended for use on 35cc to 55cc saws. (Description shows: # drive links / pitch / gauge)

Reel 25 feet / .325"/ .050"

THIS PART ALSO REPLACES: AYP 503305825 Dixon 503305825 Poulan 503305825 and others

HUSQVARNA 503306001 H42-100U CHAIN 100 FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Round ground cutters an standard sequence. Recommended for professional use on 50cc to 100cc saws. (Description shows: # drive links / pitch / gauge)

Reel 100 feet / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 503306001 Dixon 503306001 Poulan 503306001 and others

HUSQVARNA 503306025 H42-25U CHAIN 25 FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Round ground cutters an standard sequence. Recommended for professional use on 50cc to 100cc saws. (Description shows: # drive links / pitch / gauge)

Reel 25 feet / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 503306025 Dixon 503306025 Poulan 503306025 and others

HUSQVARNA 503306401 H64-100U CHAIN 100 FT


A big-timber chain where cutters have small-radius working corners for fast cutting and easy sharpening. Recommended for proffesional use on 85cc saws and larger.

Reel 100 feet / .404"/ .063"

THIS PART ALSO REPLACES: AYP 503306401 Dixon 503306401 Poulan 503306401 and others

HUSQVARNA 503306425 H64-25U CHAIN 25 FT


A big-timber chain where cutters have small-radius working corners for fast cutting and easy sharpening. Recommended for proffesional use on 85cc saws and larger.

Reel 25 feet / .404"/ .063"

THIS PART ALSO REPLACES: AYP 503306425 Dixon 503306425 Poulan 503306425 and others

HUSQVARNA 503306701 H22-100U CHAIN 100 FT


A fast-cutting, low-vibration chain where cutters have small-radius working corners for fast cutting and easy sharpening.Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

100 feet / .325" / .050"

THIS PART ALSO REPLACES: AYP 503306701 Dixon 503306701 Poulan 503306701 and others

HUSQVARNA 503306725 H22-25U CHAIN 25 FT


A fast-cutting, low-vibration chain where cutters have small-radius working corners for fast cutting and easy sharpening.Recommended for use on 35cc to 60cc saws. (Description shows: # drive links / pitch / gauge)

25 feet / .325" / .050"

THIS PART ALSO REPLACES: AYP 503306725 Dixon 503306725 Poulan 503306725 and others

HUSQVARNA 503307301 H26-100U CHAIN 100 FT


A high-performance, low-vibration chain with square "chisel" cutters, ideal for professional users in demanding conditions. Recommended for use on 35cc to 60 cc saws. (Description shows: # drive links / pitch / gauge)

Reel 100 feet / .325"/ .063"

THIS PART ALSO REPLACES: AYP 503307301 Dixon 503307301 Poulan 503307301 and others

HUSQVARNA 503307701 H57-100U CHAIN 100 FT


A high-performance, big-timber chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 85 cc and larger saws.

Reel 100 feet / .404"/ .063"

THIS PART ALSO REPLACES: AYP 503307701 Dixon 503307701 Poulan 503307701 and others

HUSQVARNA 503307801 H46-100U CHAIN 100 FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 100 feet / .3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503307801 Dixon 503307801 Poulan 503307801 and others

HUSQVARNA 503307901 H47-100U CHAIN 100 FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 100 feet/ 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503307901 Dixon 503307901 Poulan 503307901 and others

HUSQVARNA 503307925 H47-25U CHAIN 25 FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 25 feet/ 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503307925 Dixon 503307925 Poulan 503307925 and others

HUSQVARNA 503308001 H47S-100U CHAIN 100 FT


A high-performance, low-vibration, skipped chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 100 feet/ 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503308001 Dixon 503308001 Poulan 503308001 and others

HUSQVARNA 503308025 H47S-25U CHAIN 25 FT


A high-performance, low-vibration, skipped chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 25 feet/ 3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503308025 Dixon 503308025 Poulan 503308025 and others

HUSQVARNA 503308125 H48-25U CHAIN 25 FT


A high-performance, low-vibration chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 25 feet/ 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 503308125 Dixon 503308125 Poulan 503308125 and others

HUSQVARNA 503308201 H80-100U CHAIN 100 FT


A low kick-back, low-vibration chain recommended for use on 50cc to 100cc saws.

Reel 100 feet/ .3/8"/ .050"

THIS PART ALSO REPLACES: AYP 503308201 Dixon 503308201 Poulan 503308201 and others

HUSQVARNA 503308301 H81-100U CHAIN 100 FT


A low kick-back, low-vibration chain recommended for use on 50cc to 100cc saws.

Reel 100 feet / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 503308301 Dixon 503308301 Poulan 503308301 and others

HUSQVARNA 503308325 H81-25U CHAIN 25 FT


A low kick-back, low-vibration chain recommended for use on 50cc to 100cc saws.

Reel 25 feet / 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 503308325 Dixon 503308325 Poulan 503308325 and others

HUSQVARNA 544075801 H48S-100U CHAIN 100 FT


A high-performance, low-vibration, skipped chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 100 feet/ 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 544075801 Dixon 544075801 Poulan 544075801 and others

HUSQVARNA 544075825 H48S-25U CHAIN 25 FT


A high-performance, low-vibration, skipped chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 50cc to 100cc saws.

Reel 25 feet/ 3/8"/ .058"

THIS PART ALSO REPLACES: AYP 544075825 Dixon 544075825 Poulan 544075825 and others

HUSQVARNA 544923001 H64S-100U CHAIN 100 FT


A high-performance, big-timber, skipped chain with square-corner "chisel" cutters for high-production cutting of clean wood. Recommended for professional use on 85cc and larger.

Reel 100 feet / .404"/ 1,6 mm

THIS PART ALSO REPLACES: AYP 544923001 Dixon 544923001 Poulan 544923001 and others

OREGON 59L065G CHAIN LOOP for Husqvarna


- PITCH: .404
- GAUGE: .063
- BAR LENGTH: 20"
- DRIVE LINKS: 65
- DRIVE TEETH: 7

Oregon 72LGX068G 18 Inch 3/8 Super Guard Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 68
- DRIVE TEETH: 8

REPLACES:
- Dolmar 523 100 068
- and others

FITS:
- Dolmar PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- and others

Oregon 72LGX072G 20 Inch 3/8 Super Guard Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 20"
- DRIVE LINKS: 72
- DRIVE TEETH: 7

REPLACES:
- Dolmar 513 496 072, 523 100 072
- Oregon 75V072G
- Stihl 33RS3 72
- and others

FITS:
- Dolmar 120, 120 Super, PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100, PS-6800i, PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- Stihl Farm Boss, MS260 Pro, MS290, MS291, MS310, MS311, MS361, MS362, MS390, MS391, MS440, MS441C-M, MS441C-Q, MS460, MS650, MS660, MSE220
- and others

OREGON 72LGX076G SUPER GUARD CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 22"
- DRIVE LINKS: 76
- DRIVE TEETH: 7

Oregon 72LGX084G 24 Inch 3/8 Super Guard Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 24"
- DRIVE LINKS: 84
- DRIVE TEETH: 7

REPLACES:
- Dolmar 523 100 084
- Stihl 33RS3 84
- and others

FITS:
-Dolmar 120, 120 Super, PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100, PS-6800i, PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- Stihl MS440, MS441C-M, MS441C-Q, MS460, MS650, MS660
- and others

Oregon 72LGX093G 27 Inch 3/8 Super Guard Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 27" OR 28"
- DRIVE LINKS: 93
- DRIVE TEETH: 7

FITS:
- Tanaka ECS-505, ECS-506
- and others

OREGON 72LGX098G SUPER GUARD CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 30"
- DRIVE LINKS: 98
- DRIVE TEETH: 7

Oregon 72LGX105G 32 Inch 3/8" Super Guard Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 32"
- DRIVE LINKS: 105
- DRIVE TEETH: 7

FITS:
- Tanaka ECS-650, ECS-655
- and others

Oregon 72LPX060G 16 Inch 3/8 Super 70 Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 60
- DRIVE TEETH: 7

REPLACES:
- Dolmar 513 496 060, 523 100 060
- Echo 72LPX60CQ
- Efco 72LPX060X
- and others

FITS:
- Dolmar 120, 120 Super, PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100, PS-6800i, PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- Echo CS-600P, CS-620P, CS-620PW, CS-680
- Efco 156, 165
- Stihl 041AV WITH 16" BAR
- Tanaka ECS-505, ECS-506, ECS-650, ECS-655
- and others

Oregon 72LPX068G 18 Inch 3/8 Super 70 Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 68
- DRIVE TEETH: 7

REPLACES:
- Dolmar 523 100 068
- Efco 72LPX068X
- and others

FITS:
- Dolmar PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- Efco 156, 165
- and others

Oregon 72LPX072G 20 Inch 3/8 Super 70 Chisel Chainsaw Chain for Husqvarna


20" Super 70 Chisel Chainsaw Chain for Dolmar, Efco and Stihl.

- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 20"
- DRIVE LINKS: 72
- DRIVE TEETH: 7

REPLACES:
- Dolmar 513 496 072, 523 100 072
- Efco 72LPX072X
- Stihl 33RS3 72
- and others

FITS:
- Dolmar 120, 120 Super, PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100, PS-6800i, PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- Efco 156, 165
- Stihl Farm Boss, MS260 Pro, MS290, MS291, MS310, MS311, MS361, MS362, MS390, MS391, MSE220
- and others

Oregon 72LPX084G 24 Inch 3/8 Super 70 Chisel Chainsaw Chain for Husqvarna


24" Super 70 Chisel Chainsaw Chain for Dolmar, Efco and Stihl.

- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 24"
- DRIVE LINKS: 84
- DRIVE TEETH: 7

REPLACES:
- Dolmar 523 100 084
- Efco 72LPX084X
- Stihl 33RS3 84
- and others

FITS:
- Dolmar 120, 120 Super, PS-460, PS-510, PS-540, PS-5100s, PS-5105, PS-5105 H, PS-6000i, PS-6100, PS-6800i, PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- Efco 156, 165
- Stihl MS440, MS441C-M, MS441C-Q, MS460, MS650, MS660
- and others

Oregon 72LPX093G 28 Inch 3/8 Super 70 Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 27" OR 28"
- DRIVE LINKS: 93
- DRIVE TEETH: 7

FITS:
- Tanaka ECS-505, ECS-506
- and others

Oregon 72LPX105G 32 Inch 3/8 Super 70 Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8"
- GAUGE: .050"
- BAR LENGTH: 32"
- DRIVE LINKS:
- DRIVE TEETH:

REPLACES:
- Dolmar 523 100 105
- and others

FITS:
- Dolmar PS-6400, PS-6400H, PS-6400W, PS-7300, PS-7300H, PS-7300W, PS-7310, PS-7310H, PS-7310W, PS-7900, PS-7910, PS-9010
- and others

OREGON 72V068G VANGUARD CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 68
- DRIVE TEETH: 8

OREGON 72V072G VANGUARD CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 20"
- DRIVE LINKS: 72
- DRIVE TEETH: 7

OREGON 72V076G VANGUARD CHISEL CHAIN 3/8" for Husqvarna

OREGON 72V098G 72V CHAIN 98 Drive Links for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 30"
- DRIVE LINKS: 98
- DRIVE TEETH: 7

OREGON 73LGX060G SUPER GUARD CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 16"
- DRIVE LINKS: 60
- DRIVE TEETH: 7

Oregon 73LGX068G Super Guard Chisel Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 18"
- DRIVE LINKS: 68
- DRIVE TEETH: 8

Oregon 73LGX072G Super Guard Chisel Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 20"
- DRIVE LINKS: 72
- DRIVE TEETH: 7

OREGON 73LGX092G SUPER GUARD CHISEL CHAIN 3/8 for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 28"
- DRIVE LINKS: 92
- DRIVE TEETH: 7

OREGON 73LGX093G 28" SUPER GUARD CHISEL CHAIN (72,73,75LGX) for Husqvarna


28" SUPER GUARD CHISEL CHAIN (72,73,75LGX)

OREGON 73LGX105G CHAIN LOOP for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 32"
- DRIVE LINKS: 105
- DRIVE TEETH: 8

OREGON 73LGX115G CHAIN LOOP for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 36"
- DRIVE LINKS: 115
- DRIVE TEETH: 7

OREGON 73LPX052G 13" SUPER 70 Chain (72/73/75 LPX) for Husqvarna

13" SUPER 70 Chain (72/73/75 LPX)

Drive Links: 52
Chain Pitch: 3/8
Gauge: .058
Sprocket Teeth: 7

Oregon 73LPX060G 16 Inch Super 70 Chisel Chainsaw Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 16"
- DRIVE LINKS: 60
- DRIVE TEETH: 8

REPLACES:

• Efco 73LPX060X
• and others

FITS:

• Efco 156, 165
• and others

Oregon 73LPX068G 18 Inch Super 70 Chisel Chainsaw Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 18"
- DRIVE LINKS: 68
- DRIVE TEETH: 8

REPLACES:

• Efco 73LPX068X
• and others

FITS:

• Efco 156, 165
• and others

Oregon 73LPX072G 20 Inch Super 70 Chisel Chainsaw Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 20"
- DRIVE LINKS: 72
- DRIVE TEETH: 8

REPLACES:

• Efco 73LPX072X
• and others

FITS:

• Efco 156, 165
• and others

Oregon 73LPX084G 24 Inch Super 70 Chisel Chainsaw Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 24"
- DRIVE LINKS: 84
- DRIVE TEETH: 7

REPLACES:

• Efco 73LPX084X
• and others

FITS:

• Efco 156, 165
• and others

OREGON 73LPX110G 33" SUPER 70 Chain (72/73/75 LPX) for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 33"
- DRIVE LINKS: 110
- DRIVE TEETH: 7 OR 8

OREGON 73LPX115G CHAIN LOOP for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 36"
- DRIVE LINKS: 115
- DRIVE TEETH: 7

OREGON 73LPX119G SUPER 70 CHAIN for Husqvarna


- PITCH: 3/8
- GAUGE: .058
- BAR LENGTH: 37"
- DRIVE LINKS: 119
- DRIVE TEETH: 7

OREGON 73V052G VANGUARD CHISEL CHAIN 3/8" for Husqvarna


13" VANGUARD Chain (72/73/75V)
Drive Links: 52
Chain Pitch: 3/8
Gauge: .058
Sprocket Teeth: 7

OREGON 73V056G VANGUARD CHISEL CHAIN 3/8" for Husqvarna

OREGON 73V068G VANGUARD CHISEL CHAIN 3/8" for Husqvarna

OREGON 73V084G VANGUARD CHISEL CHAIN 3/8" LV for Husqvarna

OREGON 73V092G VANGUARD CHISEL CHAIN 3/8" LV for Husqvarna

OREGON 73V105G VANGUARD CHISEL CHAIN 3/8" LV for Husqvarna

OREGON 73V110G VANGUARD CHISEL CHAIN 3/8" LV for Husqvarna

OREGON 73V115G VANGUARD CHISEL CHAIN 3/8" LV for Husqvarna

OREGON 73V119G VANGUARD CHISEL CHAIN 3/8" LV for Husqvarna

Oregon 75LGX072G 20 Inch Super Guard Chisel Chainsaw Chain for Husqvarna


20" Super Guard Chainsaw Chain for Stihl.

SPECIFICATIONS:

• PITCH: 3/8
• GAUGE: .063
• BAR LENGTH: 20"
• DRIVE LINKS: 72
• DRIVE TEETH: 7

REPLACES:

• Stihl 36RS3 72
• and others

FITS:

• Stihl MS440, MS441C-M, MS441C-Q, MS460, MS650, MS660
• and others

Oregon 75LGX084G 24 Inch Super Guard Chisel Chainsaw Chain for Husqvarna


SPECIFICATIONS:

• PITCH: 3/8
  
• GAUGE: .063
  
• BAR LENGTH: 24"
  
• DRIVE LINKS: 84
  
• DRIVE TEETH: 7
  

REPLACES:

• Stihl 36RS3 84
• and others

FITS:

• Stihl MS440, MS441C-M, MS441C-Q, MS460, MS650, MS660
• and others

OREGON 75LGX093G CHAIN LOOP for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 28"
- DRIVE LINKS: 93
- DRIVE TEETH: 7

OREGON 75LGX098G CHAIN LOOP for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 30"
- DRIVE LINKS: 98
- DRIVE TEETH: 7

Oregon 75LGX105G 32 Inch Super Guard Chisel Chainsaw Chain 3/8" Pitch for Husqvarna


SPECIFICATIONS:

• PITCH: 3/8
• GAUGE: .063
• BAR LENGTH: 32"
• DRIVE LINKS: 105
• DRIVE TEETH: 7

REPLACES:

• Stihl 36RS3 105
• and others

FITS:

• Stihl MS440, MS441C-M, MS441C-Q, MS460, MS650, MS660
• and others

OREGON 75LGX110G 34" SUPER GUARD CHISEL CHAIN (72,73,75LGX) for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 34"
- DRIVE LINKS: 110
- DRIVE TEETH: 7

Oregon 75LGX115G 36 Inch 3/8 Super Guard Chisel Chainsaw Chain for Husqvarna


SPECIFICATIONS:

• PITCH: 3/8
• GAUGE: .063
• BAR LENGTH: 36"
• DRIVE LINKS: 115
• DRIVE TEETH: 7
REPLACES:
• Oregon 75V115G
• Stihl 36RS3 115
• and others
FITS:
• Stihl MS440, MS441C-M, MS441C-Q, MS460, MS650, MS660
• and others

OREGON 75LGX119G 37 INCH SUPER GUARD CHISEL CHAIN (72,73,75LGX) for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 37"
- DRIVE LINKS: 119
- DRIVE TEETH: 7

OREGON 75LPX093G CHAIN LOOP for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 28"
- DRIVE LINKS: 93
- DRIVE TEETH: 7

OREGON 75LPX098G 30" SUPER 70 Chain (72/73/75 LPX) for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 30"
- DRIVE LINKS: 98
- DRIVE TEETH: 7

OREGON 75LPX105G SUPER 70 CHAIN LOOP for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 32"
- DRIVE LINKS: 105
- DRIVE TEETH: 7

OREGON 75LPX110G 34" SUPER 70 Chain (72/73/75 LPX) for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 34"
- DRIVE LINKS: 110
- DRIVE TEETH: 7

OREGON 75V072G VANGUARD CHISEL CHAINSAW CHAIN 3/8 INCH for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 20"
- DRIVE LINKS: 72
- DRIVE TEETH: 7

OREGON 75V084G VANGUARD CHISEL CHAINSAW CHAIN 3/8 INCH for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 24"
- DRIVE LINKS: 84
- DRIVE TEETH: 7

OREGON 75V093G CHAIN SAW CHAIN for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 28"
- DRIVE LINKS: 93
- DRIVE TEETH: 7

OREGON 75V098G CHAIN SAW CHAIN for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 30"
- DRIVE LINKS: 98
- DRIVE TEETH: 7

OREGON 75V105G CHAIN SAW CHAIN for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 32"
- DRIVE LINKS: 105
- DRIVE TEETH: 7

OREGON 75V110G CHAIN SAW CHAIN for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 32" OR 34"
- DRIVE LINKS: 110
- DRIVE TEETH: 7

OREGON 75V115G CHAIN SAW CHAIN for Husqvarna


- PITCH: 3/8
- GAUGE: .063
- BAR LENGTH: 36"
- DRIVE LINKS: 115
- DRIVE TEETH: 7

Oregon 90SG045G Micro-Lite Chamfer Chisel Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .043
- BAR LENGTH: 12"
- DRIVE LINKS: 45
- DRIVE TEETH: 6

Oregon 90SG052G Micro-Lite Chamfer Chisel Chain 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .043
- BAR LENGTH: 14"
- DRIVE LINKS: 52
- DRIVE TEETH: 6

Oregon 90SG056G Micro-Lite 90 Chamfer Chisel 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .043
- BAR LENGTH: 16"
- DRIVE LINKS: 56
- DRIVE TEETH: 6

OREGON 91VG045G XtraGUARD SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 12"
- DRIVE LINKS: 45
- DRIVE TEETH: 6

FITS:
- Shindaiwa 90, 100, 110, 120, 140, 150 Electric, 160 Electric, 300, 300S
and others

OREGON 91VG052G XtraGUARD SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 14"
- DRIVE LINKS: 52
- DRIVE TEETH: 6

FITS:
- Shindaiwa 90, 100, 110, 120, 140, 150 Electric, 160 Electric, 300, 300S
and others

OREGON 91VG056G XtraGUARD SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 56
- DRIVE TEETH: 6

OREGON 91VG062G XtraGUARD SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 62
- DRIVE TEETH: 6

FITS:
- Shindaiwa 90, 100, 110, 120, 140, 150 Electric, 160 Electric, 300, 300S
and others
Previously replaced by 91PX062G which is no longer available.

OREGON 91VX045G LOW PROFILE SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 12"
- DRIVE LINKS: 45
- DRIVE TEETH:

OREGON 91VX052G LOW PROFILE SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 14"
- DRIVE LINKS: 52
- DRIVE TEETH:

OREGON 91VX056G LOW PROFILE SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8"
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 56
- DRIVE TEETH: 6

OREGON 91VX062G LOW PROFILE SEMI CHISEL CHAIN 3/8" for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 62
- DRIVE TEETH:

Oregon 91VXL045G 12 Inch Semi Chisel Chainsaw Chain 3/8 Long Top for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 12"
- DRIVE LINKS: 45
- DRIVE TEETH:

REPLACES:
- Echo 91PX45CQ
- Efco 91P045X
- Husqvarna 501 84 21-45
- Jonsered 501 84 69-45
- Oregon 91VXL045CK, 91VX045G
- Redmax 547 10 27-01
- and others

FITS:
- Dolmar 340, 401, ES-161, ES-171, ES-173, PS-32, PS-34, PS-35, PS-45, PS-350, PS-351, PS-420, PS-421, PS-3410th, 100, 101, 102, 103, 104, 105, 108, ES-161, ES-171, ES-173A, PS-32, PS-34, PS-35, PS-45, PS-340, PS-341, PS‑350, PS‑400, PS‑401, PS-420, PS-3300TH, PS-3410TH, PS-3410TH TLC, PS-351, PS-421
- Echo CS-271T, CS-280, CS-290, CS-300, CS-301, CS-303T, CS-310, CS-330T, CS-341, CS-346, CS-352, CS-355T, CS-360T, CS-370, CS-370F, CS-400, CS-400F, PPF-225, PPF-280, PPT-265, PPT-265H, PPT-265S, PPT-266, PPT-266H, PPT-266S, PPT-280
- Efco 132S, MT3600, MT3700, MT3750, MT4000, MT4100SP
- Homelite 20, 20AV, 23, 23AV, 27, 3300, 3314, 3316, 3318, 3350, 3550, 3800, 3850, 4500, 4550, CS-40, D3300, D3350B, D3850, D3850B, EL-12, EL-14, EL-16, I3350B, PS33, RANGER, UT10510, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10540, UT10544, UT10546, UT10548, UT10549, UT10560, UT10564, UT10566, UT10568, UT10569, UT10580, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10901, UT10901A, UT10926, UT10947A, UT10947D, UT10947E, UT43100, UT43102, UT43103, UT43120, UT43122, Z3850, ZR10540, ZR10560, ZR10580
- Husqvarna 23, 36, 41, 136, 137, 135, 135E, 140, 140E, 141, 142, 235, 235E, 240, 240E, 317E, 321E, 334T, 338XPT, T435, T540XP
- Husqvarna 316 Electric, 334T, 335, 335XPT, 338XPT, 339XP, T435, T540
- Husqvarna Pole Pruner: 128LDX, 325P4, 325P5X, 326P4, 326P5X, 327P4, 327P4X, 327P5X
- John Deere 25EV, 28, 28V, 30, 30V, 35, 35EV, 36, 361, 365, 40V, 200CS, 230CS, CS36, CS36LE, CS40, CS40LE, CS40V, J3816
- Jonsered 2014, 2016, 2035, 2036, 2036 Turbo, 2040, 2040 Turbo, 2137, 2138, CS2135, CS2137, CS2138, CS2152W, CS2234, CS2238S, CS2138, CS 2139T, CS2140, CS2141, CS2238, CS2238 S, CS2240, CS2240 S
- Makita 5012B, 5014NB, 5016NB, DCS 34, DCS 330S, DCS 330TH, DCS 340, DCS 341, DCS 390, DCS 390S, DCS 400, DCS 401, DCS3416, EA3201S35B, EA4300F40B, UC3030A, UC3500, UC3530A, UC4000, UC4030A
- McCulloch 10E, 12E, 14E, 16E, MCC3516, MCC3516F, MCC4516F, MCC4516FK, MS 1630NT, MS 1640NT, MS1425, MS1630, MS1640
- Partner 330, 350, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, Mini-P Series, Spartan
- Pioneer P-10, P-12
- Poulan 25A, 180, 190, 200, 205, 210, 220, 221, 222, 225, 230, 235, 236, 240, 250, 255, 260, 262, 400E, 1220, 1630, 1634, 1800, 1838, 1900, 1900LE, 1950, 1950LE, 1975, 1975LE, 2000, 2025, 2050, 2055, 2055LE, 2075, 2075C, 2150, 2155, 2160, 2175, 2250, 2250LE, 2300, 2350, 2375, 2375LE, 2450, 2550, 2550LE, 2555, 3314, 3314 WS, 3314 WSA, 3416, 3516, 3516 PR, 3516AVX, 3816, 3816AV, 3818, 4018, 4018WT, 4218, 4218A, 4218AV, 4218AVX, E14E, E16E, ES350, ES400, Micro 25 (XX Series and XXV Series), S23, S25, S25AV, S25CVA, S25D, S25DA, S35 (After conversion from 1/4" to 3/8" pitch); Electric Models: 1420, 1425, 1625, 2100, 2400, 2500, 2600, Electric Pro 400E, Patriot 1900, PP3516AVX, Wildthing, Woodshark
- Power Pruner PPF-280, PPT-280, PPT-265, PPT-265H, PPT-265S
- Redmax GZ380, GZ400, GZ3500T, GZ3800, GZ4000
- Remington Electric Models: ES1512US, ES1514AS, ES1514US, RM1215, RM1415A, RM1415U
- Sears Craftsman 3400, 3401, 3402, 3407, 3411, 3412, 3414, 3415, 3425, 3445, 3455, 3460, 3461, 3476, 34071, 34094, 34101, 34102, 34104, 34106, 34108, 34109, 34111, 34114, 34115, 34116, 34117, 34118, 34124, 34150, 34180, 34181, 34190, 34195, 35006, 35008, 35018, 35023, 35024, 35026, 35027, 35028, 35036, 35037, 35038, 35044, 35046, 35048, 35056, 35058, 35060, 35066, 35067, 35080, 35081, 35082, 35083, 35087, 35088, 35091, 35093, 35095, 35096, 35099, 35104, 35106, 35108, 35114, 35115, 35116, 35117, 35118, 35134, 35136, 35138, 35144, 35145, 35146, 35148, 35156, 35158, 35160, 35161, 35170, 35171, 35180, 35181, 35182, 35190, 35191, 35198, 35202, 35203, 35205, 35206, 35207, 35209, 35211, 35215, 35216, 35218, 35219, 35224, 35231, 35232, 35235, 35238, 35263, 35266, 35267, 35268, 35269, 35270, 35273, 35280, 35281, 35283, 35363, 35366, 35367, 35504, 35505, 35506, 35508, 35512, 35514, 35515, 35516, 35623, 35624, 35713, 35714, 35717, 35718, 35723, 35736, 35802, 35824, 35841, 35886, 36010, 36012, 36013, 36015, 36017, 36018, 36026, 36028, 36036, 36038, 36068, 36069, 36080, 36082, 36083, 36085, 36087, 36088, 36218, 38160, 38170, Cordless Electric: 98023
- Shindaiwa 90, 100, 110, 120, 140, 150 Electric, 160 Electric
- Skil 1620, 1622, 1624, 1631 Type 3, 1634, 1635, 1636
- Snapper S1634, S1838
- Solo 630, 633, 635, 636, 637, 640, 643
- Tanaka ECS-35, ECS-290, ECS-300, ECS-320, ECS-330, ECS-350, ECS-351, ECS-355, ECS-356, ECS-370, ECS-405, ECS-3301, ECS-3351, ECS-3401, ECS-3500, TCS-33EB, TCS-3301PFS, TCS-3351PFS, TCS-3401, TCS-EDTP
- Toro 51100, 51140
- and others

Oregon 91VXL052G 14 Inch Semi Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 14"
- DRIVE LINKS: 52
- DRIVE TEETH:

REPLACES:
- Dolmar 511 492 052
- Echo 91PX52CQ
- Efco 91P052X
- Husqvarna 501 84 21-52
- Jonsered 501 84 69-52
- Oregon 91VXL052CK, 91VX052G
- and others

FITS:
- Cub Cadet CS3916
- Dolmar 100, 101, 102, 103, 104, 105, 108,, 340, 401, ES-161, ES-171, ES-173, PS-32, PS-34, PS-35, PS-45, PS-350, PS-351, PS-420, PS-421, PS-3410th
- Echo CS-271T, CS-280, CS-290, CS-300, CS-301, CS-303T, CS-310, CS-330T, CS-341, CS-346, CS-352, CS-355T, CS-360T, CS-370, CS-370F, CS-400, CS-400F, PPF-225, PPF-280, PPT-265, PPT-265H, PPT-265S, PPT-266, PPT-266H, PPT-266S, PPT-280…
- Efco 132S, MT3600, MT3700, MT3750, MT4000, MT4100SP
- Homelite 20, 20AV, 23, 23AV, 27, 3300, 3314, 3316, 3318, 3350, 3550, 3800, 3850, 4500, 4550, CS-40, D3300, D3350B, D3850, D3850B, I3350B, PS33, RANGER, UT10510, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10540, UT10544, UT10546, UT10548, UT10549, UT10560, UT10564, UT10566, UT10568, UT10569, UT10580, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10901, UT10901A, UT10926, UT10947A, UT10947D, UT10947E, UT43100, UT43102, UT43103, UT43120, UT43122, Z3850, ZR10540, ZR10560, ZR10580
- Homelite 180 Series, 190, 192, 240, 240SL, 245 (Before #XE339), Bandit, Classic 192, Electric 200, Little Red, LX-30, Super 2, Super 2CC, VI Super 2, XEL‑14, XEL Electric, XL, XL2 (After #504-2001), XL-2CC, XL-10, XL-14, XL-16
- Husqvarna 135, 135E, 137, 140, 140E, 142, 23, 317E, 321E, 334T, 338XPT, 339XP, 36, 41, 136, 141, 235, 235E, 240, 240E, T435, T540XP
- Husqvarna 316 Electric, 334T, 335, 335XPT, T435, T540
- John Deere 25EV, 28, 28V, 30, 30V, 35, 35EV, 40V, 200CS, 230CS, CS36, CS36LE, CS40, CS40LE, CS40V, J3816
- Jonsered 2014, 2016, 2035, 2036, 2036 Turbo, 2040, 2040 Turbo, 2137, 2138, 36, 361, 365, CS2135, CS2137, CS2138, CS2152W, CS2234, CS2238S, CS2138, CS 2139T, CS2140, CS2141, CS2238, CS2238 S, CS2240, CS2240 S
- Makita 5012B, 5014NB, 5016NB, DCS 34, DCS 330S, DCS 330TH, DCS 340, DCS 341, DCS 390, DCS 390S, DCS 400, DCS 401, DCS3416, EA3201S35B, EA4300F40B, UC3030A, UC3500, UC3530A, UC4000, UC4030A
- Partner 330, 350, 365, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, Mini-P Series, Spartan
- Pioneer P-10, P-12
- Poulan 25A, 180, 190, 200, 205, 210, 220, 221, 222, 225, 230, 235, 236, 240, 250, 255, 260, 262, 400E, 1220, 1630, 1634, 1800, 1838, 1900, 1900LE, 1950, 1950LE, 1975, 1975LE, 2000, 2025, 2050, 2055, 2055LE, 2075, 2075C, 2150, 2155, 2160, 2175, 2250, 2250LE, 2300, 2350, 2375, 2375LE, 2450, 2550, 2550LE, 2555, 3314, 3314 WS, 3314 WSA, 3416, 3516, 3516 PR, 3516AVX, 3816, 3816AV, 3818, 4018, 4018WT, 4218, 4218A, 4218AV, 4218AVX, E14E, E16E, ES350, ES400, Micro 25 (XX Series and XXV Series), S23, S25, S25AV, S25CVA, S25D, S25DA, S35 (After conversion from 1/4" to 3/8" pitch); Electric Models: 1420, 1425, 1625, 2100, 2400, 2500, 2600, Electric Pro 400E, Micro 25PS, Patriot 1900, PP3516AVX, Wildthing, Woodshark
- Power Pruner PPF-280, PPT-280, PPT-265, PPT-265H, PPT-265S
- Redmax G250, G300AVS, G300TS, G2500, G2500TS, G3100TS, G3200EZ, G3300EZ, G3800, G3800AVS, GZ380, GZ400, GZ3500T, GZ4000
- Remington M3516AW, M15012US, M15014AS, M15014US, M30016AS, M30016US, M35016AS, M35016AW, M35016US, M35016UW, RM1415M, RM1630A, RM1630U, RM1630W, RM4214, RM4216, RM4218,
- Sears Craftsman 3400, 3401, 3402, 3407, 3411, 3412, 3414, 3415, 3425, 3445, 3455, 3460, 3461, 3476, 34071, 34094, 34101, 34102, 34104, 34106, 34108, 34109, 34111, 34114, 34115, 34116, 34117, 34118, 34124, 34150, 34180, 34181, 34190, 34195, 35006, 35008, 35018, 35023, 35024, 35026, 35027, 35028, 35036, 35037, 35038, 35044, 35046, 35048, 35056, 35058, 35060, 35066, 35067, 35080, 35081, 35082, 35083, 35087, 35088, 35091, 35093, 35095, 35096, 35099, 35104, 35106, 35108, 35114, 35115, 35116, 35117, 35118, 35134, 35136, 35138, 35144, 35145, 35146, 35148, 35156, 35158, 35160, 35161, 35170, 35171, 35180, 35181, 35182, 35190, 35191, 35198, 35202, 35203, 35205, 35206, 35207, 35209, 35211, 35215, 35216, 35218, 35219, 35224, 35231, 35232, 35235, 35238, 35263, 35266, 35267, 35268, 35269, 35270, 35273, 35280, 35281, 35283, 35363, 35366, 35367, 35504, 35505, 35506, 35508, 35512, 35514, 35515, 35516, 35623, 35624, 35713, 35714, 35717, 35718, 35723, 35736, 35802, 35824, 35841, 35886, 36010, 36012, 36013, 36015, 36017, 36018, 36026, 36028, 36036, 36038, 36068, 36069, 36080, 36082, 36083, 36085, 36087, 36088, 36218, 38160, 38170
- Shindaiwa 90, 100, 110, 120, 140, 150 Electric, 160 Electric
- Skil 1600, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, 1700, 1705, 1712, 1620, 1622, 1624, 1631 Type 3, 1634, 1635, 1636
- Snapper S1634, S1838
- Solo 630, 633, 635, 636, 637, 640, 643
- Tanaka ECS-35, ECS-290, ECS-300, ECS-320, ECS-330, ECS-350, ECS-351, ECS-355, ECS-356, ECS-370, ECS-405, ECS-3301, ECS-3351, ECS-3401, ECS-3500, TCS-33EB, TCS-3301PFS, TCS-3351PFS, TCS-3401, TCS-EDTP
- Toro 51100, 51140
- Wen/Wagner 3814, 4014
- Worx WG305
- and others

Oregon 91VXL056G 16 Inch 3/8 Semi Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8"
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 56
- DRIVE TEETH: 6

REPLACES:
- Dolmar 511 492 056
- Oregon 91VXL056CK, 91VX056G
- and others

FITS:
- Black and Decker LH1600, LOG HOG
- Dolmar 100, 101, 102, 103, 104, 105, 108, ES-161, ES-171, ES-173A, PS-32, PS-34, PS-35, PS-45, PS-340, PS-341, PS-350, PS-400, PS-401, PS-420, PS-3300TH, PS-3410TH, PS-3410TH TLC
- Dolmar PS-351, PS-421
- Echo CS-280, CS-290, CS-300, CS-300EVL, CS-301, CS-302 (AFTER #0015304), CS-302S, CS303T, CS-305, CS-306, CS-310, CS-315, CS-330EVL, CS-330T, CS-340, CS-341, CS-345, CS-346, CS-351 (AFTER #0112195), CS-330MX4, CS-352, CS-355T, CS-360, CS-360T, CS-370, CS-370T, CS-400, CS-3000, CS-3400, CS-3450, ECS-2000, ECS-3000
- Homelite 20, 20AV, 23, 23AV, 27, 3300, 3314, 3316, 3318, 3350, 3550, 3800, 3850, 4500, 4550, CS-40, D3300, D3350B, D3850, D3850B, EL-12, EL-14, EL-16, I3350B, PS33, RANGER, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10540, ZR10540, UT10548, UT10549, UT10560, ZR10560, UT10568, UT10564, UT10566, UT10568, UT10569, UT10580, ZR10580, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10901, UT10901A, UT10926, UT10947A, UT10947D, UT10947E, UT43100, UT43102, UT43103, UT43120, UT43122, Z3850;
- Husqvarna 33, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 133, 154, 234, 238, 242, 246, 254, 257, 261, 262, 336, 340, 345, 346, 350, 351, 353, 242XP, 254XP, 262XP, 339XP, 346XP, 346XP E-TECH, 346XPG, 353 E-TECH, 353G E-TECH, 357XP, 357XPG, 359, 359 E-TECH, 360, 435, 435E, 440E, 444, 445, 445E, 450, 450 50TH ANNIVERSARY, 450E, 455, 455E RANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 545, 550XP, 550XPG
- Husqvarna 23, 36, 41, 136, 137, 141, 142, 235, 235E, 240, 240E, 243, 249
- Husqvarna 334T, 335, 335XPT, 338XPT, 1400, 1600, 316 ELECTRIC, T435
- John Deere 25EV, 28, 28V, 30, 30V, 35, 35EV, 40V, 200CS, 230CS, CS36, CS36LE, CS40, CS40LE, CS40V, J3816
- Jonsered 2116E, 36, 361, 365
- JOnsered 2014, 2016, 2035, 2036, 2036 TURBO, 2040, 2040 TURBO, 2137, 2138, CS2135, CS2137, CS2138, CS2152W, CS2238S
- Makita 5012B, 5014NB, 5016NB, DCS 330S, DCS 330TH, DCS 34, DCS 340, DCS 341, DCS 390, DCS 390S, DCS 400, DCS 401, DCS3416, EA4300F40B, EA3201S35B, UC3030A, UC3500, UC3530A, UC4000, UC4030A
- Makita 5012B, 5014NB, 5016NB, DCS 330S, DCS 330TH, DCS 34, DCS 340, DCS 341, DCS 390, DCS 390S, DCS 400, DCS 401, DCS3416, EA4300F40B, EA3201S35B, UC3030A, UC3500, UC3530A, UC4000, UC4030A
- McCulloch MS 1630NT, MS 1640NT
- McCulloch EB356A, EB358, MAC CAT 438, MC3516, MC4218AV, MCC1435A, MCC1635A, MCC1840B, MP406, MS354A, MXC1840D, MXC1840DK, MS 4016P, MS 4018P
- Partner 330, 350, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, MINI-P SERIES, SPARTAN
- Pioneer P-10, P-12
- Poulan 25A, 180, 190, 200, 205, 210, 220, 221, 222, 225, 230, 235, 236, 240, 250, 255, 260, 262, 400E, 1220, 1630, 1634, 1800, 1838, 1900, 1900LE, 1950, 1950LE, 1975, 1975LE, 2000, 2025, 2050, 2055, 2055LE, 2075, 2075C, 2150, 2155, 2160, 2175, 2250, 2250LE, 2300, 2350, 2375, 2375LE, 2450, 2550, 2550LE, 2555, 3314, 3314 WS, 3314 WSA, 3416, 3516, 3516 PR, 3516AVX, 3816, 3816AV, 3818, 4018, 4018WT, 4218, 4218AV, 4218AVX, E14E, E16E, ES350, ES400, MICRO 25 (XX SERIES AND XXV SERIES), S23, S25, S25AV, S25CVA, S25D, S25DA, S35 (AFTER CONVERSION FROM 1/4 TO 3/8 PITCH); ELECTRIC MODELS: 1420, 1425, 1625, 2100, 2400, 2500, 2600, ELECTRIC PRO 400E, PATRIOT 1900, PP3516AVX, WILDTHING, WOODSHARK
- Redmax G250, G300AVS, G300TS, G310TS, G2500, G2500TS, G3100TS, G3200EZ, G3300EZ, GZ3500T, GZ380, G3800, G3800AVS, GZ400, GZ4000
- Remington ELECTRIC MODELS: 107714-02, 098031J, 099039J, CLD3616AWB, LD3516AWB, CLD4016W, CLD4018AW, CLD4018AWC. LD4018AW, LD4018WC, LD4016AW, 107624-01, 107624-02, 107625-01, 107625-02, 111174-01, RM1632A, RM1635W, RM1640B, RM1640W, RM1840W
- Sears-Craftsman 3400, 3401, 3402, 3407, 3411, 3412, 3414, 3415, 3425, 3445, 3455, 3460, 3461, 3476, 34071, 34094, 34101, 34102, 34104, 34106, 34108, 34109, 34111, 34114, 34115, 34116, 34117, 34118, 34124, 34150, 34180, 34181, 34190, 34195, 35006, 35008, 35018, 35023, 35024, 35026, 35027, 35028, 35036, 35037, 35038, 35044, 35046, 35048, 35056, 35058, 35060, 35066, 35067, 35080, 35081, 35082, 35083, 35087, 35088, 35091, 35093, 35095, 35096, 35099, 35104, 35106, 35108, 35114, 35115, 35116, 35117, 35118, 35134, 35136, 35138, 35144, 35145, 35146, 35148, 35156, 35158, 35160, 35161, 35170, 35171, 35180, 35181, 35182, 35190, 35191, 35198, 35202, 35203, 35205, 35206, 35207, 35209, 35211, 35215, 35216, 35218, 35219, 35224, 35231, 35232, 35235, 35238, 35263, 35266, 35267, 35268, 35269, 35270, 35273, 35280, 35281, 35283, 35363, 35366, 35367, 35504, 35505, 35506, 35508, 35512, 35514, 35515, 35516, 35623, 35624, 35713, 35714, 35717, 35718, 35723, 35736, 35802, 35824, 35841, 35886, 36010, 36012, 36013, 36015, 36017, 36018, 36026, 36028, 36036, 36038, 36068, 36069, 36080, 36082, 36083, 36085, 36087, 36088, 36218
- Skil 1620, 1622, 1624, 1631 TYPE 3, 1634, 1635, 1636
- Skil 1600, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616, 1700, 1705, 1712
- Snapper S1634, S1838
- Solo 630, 633, 635, 636, 637, 640, 643
- Toro 51100, 51140
- Wen/Wagner 1100, 1200, 1400, 2000, 2400, 2600, 2700, 3816, 3818, 5008, 5010, 5014, 5016, BUMBLE BEE, HORNET, WASP
and others

Oregon 91VXL062G 18 Inch 3/8 Semi Chisel Chainsaw Chain for Husqvarna


- PITCH: 3/8
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 62
- DRIVE TEETH:

REPLACES:
- Echo 91PX62CQ
- Oregon 91VXL062CK, 91VX062G
- and others

FITS:
- Echo CS-271T, CS-301, CS-303T, CS-310, CS-330T, CS-341, CS-346, CS-352, CS-355T, CS-360T, CS-370, CS-370F, CS-400, CS-400F
- and others

Oregon 95VPX064G Micro-Lite Chain for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 15"
- DRIVE LINKS: 64
- DRIVE TEETH: 7

Oregon 95VPX066G 16 Inch .325 Micro-Lite Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 16"
- DRIVE LINKS: 66
- DRIVE TEETH: 7

REPLACES:
- Echo 95VP66CQ
- Efco 95VPX066X
- and others

FITS:
- Echo CS-450, CS-520
- Efco MT4400
- and others

Oregon 95VPX072G 18 Inch .325 Micro-Lite Chainsaw Chain for Husqvarna


- PITCH: .325
- GAUGE: .050
- BAR LENGTH: 18"
- DRIVE LINKS: 72
- DRIVE TEETH: 7

REPLACES:
- Echo 95VP72CQ
- Efco 95VPX072X
- and others

FITS:
- Echo CS-450, CS-520
- Efco MT4400
- and others

Showing 174 Products