Small Engine Electrical Testing Tools

10 Products Found

OREGON 42-031 INLINE SPARK TESTER for Small Engine Parts


Allows visual inspection of ignition output
use between coil wire and spark plug

REPLACES:

• STENS 752-329
• and others

Oregon 42-087 Inline Spark Tester for Small Engine Parts


Our #1 Selling Spark Tester

ECHO 900300 PET-9000 IGNITION ANALYZER

THIS PART ALSO REPLACES: Shindaiwa 900300 and others

STENS 752-618 Test Light for Small Engine Parts

Genuine OEM BRIGGS AND STRATTON 19400 SPARK TESTER 3LC


Special Air Gap of .400" (10 mm) for use on Briggs and Stratton Vanguard 3-cylinder liquid-cooled engines.

THIS PART ALSO REPLACES: Murray 19400 Snapper 19400 and others

Briggs And Stratton 19468 Dc Shunt


An improved version of a valuable diagnostic tool. Color coded receptacles hold digital multimeter leads securely while testing. This tool works with any digital multimeter with a milivolt scale.

Have you ever wanted one tool in your toolbox that would make your life so much easier that it would pay for itself after the first couple of uses?

That tool might well be the 19468 DC shunt. The DC shunt is a device that enables the technician to make several electrical tests with only one hook-up to the equipment.

By using the DC shunt, we can test for system draw with the key switch off, system draw with the key switch on, starter peak amp and steady amp draw, and alternator charging.

All of these tests can be done in about 30 seconds taking all the guess work out of the process. THIS PART REPLACES:

• BRIGGS AND STRATTON 19359
• and others

THIS PART ALSO REPLACES: Murray 19468 Snapper 19468 and others

Briggs And Stratton 19528 Ac Output Tester


Use with 19464 Digital Multimeter for testing AC output on the 19581 PowerLink Stators.

THIS PART ALSO REPLACES: Murray 19528 Snapper 19528 and others

Briggs And Stratton 19602 Multimeter


400 Amp AC/DC Clamp Style Digital Multi Meter

This Multi-Meter is feature packed and safer to use for amperage testing than standard probe style meters. It can measure the following:
- AC/DC Volt - with a Cat III 600 Volt Safety Rating
- AC/DC Current (Amp)
- Resistance (Ohms)
- Continuity & Diode Testing - With audible signal
- Capacitance & Frequency (Hz) or % Duty Cycle
- Temperature CO or FO (-22 to 572O F/-30 to 300OC)

Comes complete with test leads, type K bead wire thermocouple probe, case, two AAA batteries and instruction booklet

THIS PART ALSO REPLACES: Murray 19602 Snapper 19602 and others

ECHO 91023 INFRARED THERMOMETER

THIS PART ALSO REPLACES: Shindaiwa 91023 and others

Echo PET4000EC Spark Tester


Fits Echo Equipment.

THIS PART ALSO REPLACES: Shindaiwa PET4000EC and others

Showing 10 Products