Snapper Top 50 Selling Parts

Search for OEM Snapper Lawn Mower Parts

Top 50 Selling Snapper Parts available online from LawnMowerPros and ready to ship direct to your door. We are an Authorized Snapper Dealer carrying a large selection of Snapper Top 50 Selling Parts. If you do not see the Snapper Top 50 Selling Part you need, please complete the Lawn Mower Parts Request Form and we will be happy to assist you.

45 Products Found

Oregon 02-114 Cable Clip 7/8 In Dual Cable

7/8" Dual Cable Clip for MTD, Snapper and more

- Fits 7/8" tubing
- Holds all sizes of conduit
- Heat treaded spring steel Plated

REPLACES:

MTD 716-0178, 725-0157, 726-0178
SNAPPER 1-0098, 2-3813, 7023813
and others

Price: $1.99

OREGON 05-060 TENSION SPRING FOR SNAPPER

Drive Tension Spring Self-Propelled Steel Deck Mowers

REPLACES:

SNAPPER 1-2123
SNAPPER 1-3694
SNAPPER 1-7326
SNAPPER 2-9025
SNAPPER 7029025
and others

Drive spring
Tension spring for wheel drive on self-propelled steel deck mowers

This part is no longer available and has been replaced by Stens 285-635

Oregon 05-061 Tension Spring For Snapper

Clutch Tension Spring - Snapper Self-Propelled Mowers

REPLACES:

SNAPPER 1-2122
SNAPPER 7012122
and others

Clutch spring
Self-propelled mowers
Adjustable
6" L x 1/2" OD

This part is no longer available and has been replaced by Snapper 7012122YP

Gas Cap for Briggs, Murray and Snapper

GAS CAP for Briggs & Stratton

REPLACES:

BRIGGS & STRATTON 397975
MURRAY 23711
PRIME LINE 7-04918
ROTARY 2235
SNAPPER 1-2515, 224626, 7012515
STENS 125-179
and others

Fits Snapper rider with vent
Fits 2-1/4" neck

Price: $19.99

Oregon 33-002 Pto Switch, Exmark

REPLACES:

ARIENS 1545600, 522100
EXMARK 1-633673, 633673
JOHN DEERE AM118802, AM119139, AM131966
KEES 102424
KUBOTA K1211-62230
MTD 725-1716, 725-1752, 725-3233, 925-04174, 925-1716, 925-3233
SCAG 481635
SNAPPER 2-8542, 7028542
TORO 92-6787, 92-6788, 93-9998, 93-9999, 95-4108, 95-7489
TORO-WHEELHORSE 92-6787, 92-6788, 93-9998, 93-9999, 95-4108
YAZOO-KEES 102424
and others

PTO switch, Push-pull, snap mount 5 terminal

Price: $52.99

STARTER SWITCH SNAPPER 1-2623 AND 7012623

REPLACES:

SNAPPER 1-2623
SNAPPER 7012623
and others

Electric start push button
High amperage switch
Can be used with our 33-390

This part is no longer available and has been replaced by SNAPPER 7012623YP

Oregon 33-330 Solenoid - 3 Post For AMF, Ariens, Bolens, Snapper, Toro, Wheel Horse

Starter Solenoid - 3 Post

Solenoid for Ariens

SPECIFICATIONS:

5/16" diameter bolts
3 post
Internal ground with screw terminal
50% duty
80 amp capacity
Includes new spade converter

REPLACES:

AMF 53716
AMF 52323
AMF 782966
ARIENS 01028900
ARIENS 01029000
ARIENS 30387
ARIENS 30577
ARIENS 3057700
Bolens 1751569
DIXON 4008
Dynamark 782966
Noma 424285
Noma 52323
Noma 53716
SNAPPER 1-8817
SNAPPER 2526385
Wheel Horse 111674
and others

Price: $17.99

4-Pole Starter Solenoid

Solenoid - 4 Pole Style

- 1/4-20 studs
- 50% duty
- External ground
- 80 amp capacity
- Includes new spade converter

REPLACES:

ARIENS 35510
AYP 109081X, 109946, 146154
BOLENS (ALSO SEE MTD) 175-2137, 175-3539
GILSON 212655
GRASSHOPPER 184251
GRAVELY 45071
LAWN-BOY 740207
MURRAY 146154
ROPER 109081X, 109946, 146154
SEARS 146154
SIMPLICITY 1700751
SNAPPER 1-8604
TORO 28-4210, 47-1910
TORO-WHEELHORSE 28-4210, 47-1910
WHEELHORSE 110162, 28-4210, 47-1910
and others

Note: The OEM AYP 146154 is a kit to replace both 3 post and 4 post solenoids using jumper wires.
33-331 is the three post solenoid
33-334 is the four post solenoid

Price: $15.99

Solenoid MTD 1990 to Current

- 90 DEG mount , 3 post
- Slide connector terminal
- 1/4" diameter bolt
- 50% duty, 80 Amp capacity
- MTD 1990 to current

REPLACES:

AYP 110832X
HUSQVARNA 532110832
MTD 725-1426
Snapper 1-8817
STENS 435-065
TORO 112-0309
and others

Price: $14.99

Oregon 33-390 Ignition Switch, Snapper 1-1853

Ignition Switch Snapper 1-1853

REPLACES:

Snapper 1-1853
and others

FITS:

Snapper riding mowers
and others

Requires 5/8" mounting hole

This part is no longer available and has been replaced by SNAPPER 7011853YP

Ignition Switch Snapper 1-8816

REPLACES:

Snapper 1-8816
and others

Series 6, 7, 8, 9, 10, & 11
1988 to present
Use on electric start riders without push button start

Price: $19.99

Oregon 34-021 2-1/2 Inch X 1/4 Inch Flat Idler Pulley Snapper 1-2124

Flat Idler Pully
Use on self-propelled mowers
Steel and aluminum deck

SPECIFICATIONS:

OD: 2-1/8"
Flat OD: 1-7/8"
Flat Width: 1/2"
Overall Width: 21/32"
Bore: 1/4"
Offset: 3/16"
Material: Steel

REPLACES:

SNAPPER 1-2124
SNAPPER 81816
and others

Price: $9.99

OREGON 35-033 MUFFLER SNAPPER 1 IN OD PIPE

MUFFLER WITH 1"OD PIPE FOR SNAPPER RIDERS

REPLACES:

Snapper 5-1996
and others

FITS:

Snapper Riders with 12 & 12.5 HP Briggs & Stratton engines
and others

Overall length: 12"
OD pipe: 1"
OD muffler: 5"

Price: $51.99

Snapper 7011024 Oil Fill and Check Plug

REPLACES:

SNAPPER 1-1024
SNAPPER 7011024
and others

Oil Filter Plug
For transmissions on riders and tractors

Price: $1.99

OREGON 45-158 BEARING SEALED BALL .625 X 1.37 SNAPPER for Snapper

Sealed Bearing with C-Clip Retainer Ring for Ariens

ARIENS 54161
ARIENS 54162
HAHN ECLIPSE 326985
LESCO 50357
SNAPPER 1-0756
SNAPPER 79339
TILDEN 30-507
and others

This part is no longer available and has been replaced by Oregon 45-260

OREGON 45-208 BEARING BALL .562 X 1 3/8 SNAPPER

BEARING BALL .562 X 1 3/8 SNAPPER

Wheel Arm bearing

Replaces:
- Ariens 54151
- Rotary 1-8767
- Snapper 1-8766
- Snapper 1-8767
- Snapper 2508122
- Stens 230-144
REF NO. 16222-RSNR (for self-propelled 21" walk behinds; replacement for our 295-151 and 295-182 wheel arm assemblies; with retaining ring)
Also used in our 79-605 & 79-610
ID: .563"
OD: 1.375"
Width: .437"

This part is no longer available and has been replaced by STENS 230-144

OREGON 45-209 BEARING BALL 3/8 X 1 SNAPPER

SNAPPER 2233126 BEARING BALL 3/8 X 1

REPLACES:

SNAPPER 1-2304
SNAPPER 147559
SNAPPER 2233126
SNAPPER 2-8014
and others

All 21" self-propelled mowers
ID: 3/8", OD: 1", Width: 5/16"

Price: $17.99

SNAPPER 7012927 BLADE ADAPTER

SPECIFICATIONS:

5/32" keyway
POWDERED METAL

REPLACES:

SNAPPER 1-2927
SNAPPER 375106
SNAPPER 7012927
and others

FITS:

steel deck walk-behind mowers
and other models

Also fits our 99-103, 99-107 & 99-920 blades

Price: $11.99

SNAPPER 7052268 WHEEL ASSEMBLY 410/350-4

SPECIFICATIONS:

410/350-4 2-ply tube stud tire
Mounted on 1-piece white wheel
3/4" ball bearings
3-1/4" offset hub length

REPLACES:

SNAPPER 134532
SNAPPER 5-0618
SNAPPER 5-2268
SNAPPER 7052268
and others

Uses (2) 45-034 or 45-010 bearing
Tube version of 72-728

Price: $48.95

SNAPPER 958764 BELT SPEC 6 SIDED 108.4IN

- Size: 1/2" x 108-7/16"

REPLACES:

Snapper 1-4525
SNAPPER 958764
and others

FITS:

For 41" rear rider & 48" deck on tractors
and others

Price: $43.99

Snapper 2017356 Drive Disk With Liner

Drive disc kit with drive liner

REPLACES:

SNAPPER 2017356
SNAPPER 439508
SNAPPER 5-3103
SNAPPER 5-7423
and others

Kit contains (1) 76-067 and (1) 76-002

Price: $34.99

Snapper 1-1035 Bolt LH Hub

- 1-5/8" L x 5/16-24 thread
- Tapered head
- For left-hand side

REPLACES:

Snapper 1-1035
and others

FITS:

Snapper rear hubs on rear engine rider,
and others

Also fits our 76-006

Price: $3.99

SNAPPER 670253 HANDLE KNOB

SPECIFICATIONS:

5/16-18 thread
2-3/8" OD

REPLACES:

SNAPPER 2-3735
SNAPPER 670253
and others

Use with our 02-050 bolt

Price: $5.99

Snapper 2430691 Long Seal Boot

SPECIFICATIONS:

Length: 10-1/4"
Fits 1-3/4" hub

REPLACES:

SNAPPER 1-7084
SNAPPER 1-8555
SNAPPER 1893419
SNAPPER 2430691
and others

FITS:

Snapper Rear Engine Riders
and other models

Price: $7.99

SNAPPER 1893054 SHORT SEAL BOOT

SPECIFICATIONS:

Length: 8"
Fits 1-3/4" hub

REPLACES:

SNAPPER 1-1011
SNAPPER 1-7083
SNAPPER 1893054
and others

FITS:

Snapper Rear Engine Riders
and other models

This part is no longer available and has been replaced by STENS 240-648

Snapper 7017817 Ignition Switch

SPECIFICATIONS:

2 position, 2 terminals
On/off switch

REPLACES:

SNAPPER 1-7817
SNAPPER 7017817
and others

FITS:

SNAPPER Single stage snow throwers
and other models

Price: $11.99

Oregon LMP45-000SNA Bearing Ball 1-3/8 Inch X 3/4 Inch

Snapper 1750641 Bearing Ball 1-3/8" X 3/4"

Rear height adjuster bearing on walk behind mower model 911013. Front wheel bearing on 1983 thru 1988 tractor models, 934001 thru 934003
Also fits our 51-000
OD: 1.375"
ID: 3/4"
Width: 0.479"

Wheel Bearing

REPLACES:

SNAPPER 1305379
SNAPPER 1750641
SNAPPER 1-5474
SNAPPER 2-6693
and others

Price: $7.99

Oregon LMP45-010SNA Bearing Ball 3/4 Inch X 1-3/8 Inch

Snapper 7026693 Bearing Ball 3/4" X 1-3/8"

Bearing

SPECIFICATIONS:

Rear height adjuster bearing on walk-behind mower model 911022
Snapper Disc drive bearing
ID: 3/4"
OD: 1-3/8"
Width: 0.487"

REPLACES:

SNAPPER 1-0570, 1-0943, 1-1807, 1305379, 1-5474, 7011807, 7026693
and others

Also fits our Part Number 72-728

Price: $14.99

Oregon LMP45-034SNA Flanged Ball Bearing 3/4 Inch X 1-3/8 Inch

Snapper 1-1807 Flanged Ball Bearing 3/4" X 1-3/8"

REPLACES:

SNAPPER 1-1807
and others

Price: $2.99

Oregon LMP45-057SNA Flanged Wheel Bushing 3/4 X 1-3/8

Snapper 943424 Flanged Wheel Bushing 3/4 X 1-3/8

Flanged Wheel Bushing

REPLACES:

SNAPPER 1-4483
SNAPPER 943424
and others

Fits front wheel on most lawn and garden tractors
1-3/8"OD x 3/4"ID x 1"W

Price: $6.99

Oregon LMP45-081SNA Bushing 49/64 X 13/16

Snapper 7010986 Bushing 49/64 X 13/16

SPECIFICATIONS:

ID: 49/64"
OD: 13/16"
Width: 43/64"

REPLACES:

SNAPPER 1-0986
SNAPPER 7010986
and others

Price: $0.99

SNAPPER 7013321 BUSHING 25/64 X 1/2

REPLACES:

SNAPPER 10743
SNAPPER 11099
SNAPPER 11100
SNAPPER 1-3321
SNAPPER 519012
SNAPPER 7013321
and others

Plastic tie rod bushing
1-0743 ID: 25/64", OD: 1/2", Width: 25/64"

Price: $0.79

Snapper 7014514 Bearing Ball

SPECIFICATIONS:

ID: .625"
OD: 1.374"
Width .43"

REPLACES:

SNAPPER 1-4514
SNAPPER 1981259
SNAPPER 7014514
SNAPPER 7-7324
SNAPPER 954746
and others

Fits new style mowers
And Edger shaft bearing for John Deere model # 2, #3 and 3K edgers
Also fits our 82-243 quill assembly

Price: $10.99

Snapper 1-0756 Ball Bearing

SPECIFICATIONS:

OD: 1.375
ID: 0.625
Reference No: 99502H
Width: 0.431

REPLACES:

ARIENS 01033000
ARIENS 01033500
ARIENS 54161
HAHN ECLIPSE 326985
LAWN-BOY 50357
OREGON 45-158
SNAPPER 1-0756
and others

Price: $16.89

SNAPPER 534748 RUBBER DRIVE RING

REPLACES:

SNAPPER 1-0927
SNAPPER 2-3364
SNAPPER 534748
and others

FITS:

self-propelled mowers, all 21P series
and other models

Price: $7.99

OREGON LMP72-728SNA WHEEL ASSEMBLY 410/350-4

SNAPPER 5-2267 WHEEL ASSEMBLY 410/350-4

SPECIFICATIONS:

410/350-4 2-ply tubeless stud tire
Mounted on 1-piece white wheel
3/4" ball bearings
3-1/4" offset hub length

REPLACES:

SNAPPER 5-0618
SNAPPER 5-2267
and others

Uses (2) 45-034 or 45-010 bearing

Price: $64.99

Oregon LMP75-068SNA Rear Engine Rider Belt

Snapper 7010749 Rear Engine Rider Belt

- Size: 1/2" x 71-7/16" Premium Belt

REPLACES:

SNAPPER 1-0749, 10749, 7010749
and others

FITS:

AA belt, for most SNAPPER 25", 26", 28" & 30" cut rear engine rider
and others

Price: $13.99

Oregon LMP75-073SNA Spec Belt 6 Sided 71In (AA71)

Snapper 2-2252 6 Sided Spec Belt

SPECIFICATIONS:

Size: 1/2" x 73"

REPLACES:

SNAPPER 1-8236
SNAPPER 2-2252
and others

FITS:

AA belt, For 33" cut, new style 30" riders
and others

Price: $20.99

SNAPPER 1-2353 3/8 X 25-1/2 BELT

- Size: 3/8" x 25-1/2"

REPLACES:

SNAPPER 1-2353
and others

FITS:

Engine drive belt for 21PC commercial series, for steel deck series 6, 7, 8, 9, 0, commercial series 0, 7, 9
and others

Price: $8.19

Snapper 165822 3/8 X 22 Belt

- Size: 3/8" x 22"

REPLACES:

SNAPPER 1-2354
SNAPPER 165822
and others

FITS:

Transmission belt, Poly V for 21P steel deck>
Fits V-21 self-propelled mowers
and others

Price: $7.99

SNAPPER 222069 3/8 X 24-1/2 BELT

- Size: 3/8" x 24-1/2"

REPLACES:

SNAPPER 1-2508
SNAPPER 222069
and others

FITS:

Engine drive belt for all 21P standard mowers Fits most V21 series, 3-1/2 & 4 HP engines
and others

Price: $11.99

Snapper 7018782 Drive Disc

Drive Disc Without Liner

SPECIFICATIONS:

OD: 6"
ID: 5-3/8"

REPLACES:

SNAPPER 1-0765, 7018782
and others

FITS:

Fits Snapper rear engine riders
Fits Large frame snowthrowers
Fits Tractor with stand drive rear
Fits rear tine tillers (RTS, RTB)
and others

This part is no longer available and has been replaced by Stens 240-394

Snapper 2126868 Blade Air Lift Set

SPECIFICATIONS:

Length: 4"
Center Hole: 5/16"
Outer Hole: 5/16"
Outer Hole Center to Center: 1-1/4"

REPLACES:

SNAPPER 2126868
SNAPPER 3-7723
and others

INCLUDES:

Air lift set contains (2) 3 hole deflectors, (6) starlock washers, (6) 5/16-24 x 21/32 Grade #5, Oval head screws, (6) hex nuts.

This part is no longer available and has been replaced by Stens 336-422

Snapper 7077288 Oil Filter

Oil Filter for Snapper

- Replaces filter on 4 HP - 17 HP Kawasaki engines
- Relief Pressure: 8-11 PSI
- Anti-drain valve
- Mounting Thread: 3/4-16
- Seal OD: 2-3/4"
- OD: 2-3/4"
- Height: 2-7/8"
- 28 Micron

REPLACES:

SNAPPER 7077288
SNAPPER 77355
and others

FITS:

SNAPPER With Kawasaki engines
and other models

Price: $9.99

SNAPPER 2684900 REAR GRASS BAG

REPLACES:

SNAPPER 1-8177
SNAPPER 1-9251
SNAPPER 2292630
SNAPPER 2684900
and others

FITS:

For rear bag riding mowers
All single bag riders
and others

This part is no longer available and has been replaced by Stens 365-080

Showing 45 Products

SHOP WITH CONFIDENCE
35 YEARS EXPERIENCE
365 DAY RETURN POLICY
FREE TECH SUPPORT
WE SHIP ANYWHERE
MILLIONS OF PARTS
Need help finding the correct repair parts?

Get Help!
Recommend This Page.
"Two Oregon 9" edger blades. Could not be found locally in South Florida. Thanks for having them at a great price. A very easy transaction. Would recommend Lawnmowerpros.com to anybody. Thanks again,"

- David B.

"thanks thousand the tanks has arrived. A reliable seller"

- Tony

"Thank you so much. It's rare to find good service like this. I appreciate it."

- Ron W.

"I will keep your company book-marked and order from you first in the future! Your kind of service is exceptional!"

- Bill

"It's nice to do business with good people like you."

- Michael B.

"Many thanks for the prompt parts order. I waited over 4 months for my local repair shop to get the part and they ended up with the wrong one. Next time I will do it myself."

- Robin C.