Lawn Mower Parts and Equipment Since 1982!

Stens Aftermarket Lawn Mower Parts

Search for Stens Aftermarket Lawn Mower Parts

Stens Parts available online. We are an carry a large selection of Stens Aftermarket Parts ready to ship direct to your door. The following are the most popular Stens Aftermarket Parts. If you do not see the Stens Aftermarket Part you need, please complete the Lawn Mower Parts Request Form and we will be happy to assist you.

7874 Stens Aftermarket Lawn Mower Parts Found

Stens 025-423 Hydro Pump, Parker

  Stens 025-423 Hydro Pump, Parker

REPLACES:
  • HYDRO GEAR BDP-10A-201
  • HYDRO GEAR PG-DAQQ-DY1X-XXXX
  • PARKER H310A3032A3A30000-04
  • and others


 

Stens 025-447 Hydro Pump, Parker

  Stens 025-447 Hydro Pump, Parker

REPLACES:
  • HYDRO GEAR BDP-10A-302
  • HYDRO GEAR PG-DJQQ-DY1X-XXXX
  • PARKER H310B3033A3A30000-04
  • and others


 

Stens 025-451 Hydro Pump, Parker

  Stens 025-451 Hydro Pump, Parker

REPLACES:
  • DIXIE CHOPPER 65070
  • HYDRO GEAR BDP-10A-313
  • HYDRO GEAR PG-DJCC-DY1X-XXXX
  • PARKER H310B3033E3E30000-04
  • and others


 

Stens 025-511 Seal Kit - Wheel Motor Parker

  Stens 025-511 Seal Kit - Wheel Motor Parker

REPLACES:
  • PARKER SK-000092
  • and others
Fits our 025-507 Wheel Motor - Parker
Fits our 025-503 Wheel Motor - Parker

  Price: $70.95


Stens 025-515 Wheel Motor, Parker Exmark 1-603718

  Stens 025-515 Wheel Motor, Parker Exmark 1-603718

REPLACES:
  • EXMARK 1-603718
  • PARKER TE0230FS250AAFA
  • and others
FITS:
  • EXMARK Turf Tracer and Viking
  • and others


  Price: $591.99


STENS 030-007 GAS FLANGED PUMP

  STENS 030-007 GAS FLANGED PUMP

Bore:0.591 "
Stroke:0.256 "

REPLACES:
  • GENERAL PUMP TC1506GUI
  • and others
-Gallons Per Minute:2.6
-Pounds Per Square Inch:2,700
-RPM:3,400
-GHP:7.21
-TC Series 60
-Triplex plunger pump
-Compact design
-3/4" hollow shaft
-Flanged for direct couple to gasoline engines
-SAE J609A
-Premium built-in trapped pressure unloader on left side of manifold with an exclusive lifetime warranty
-Maximum inlet pressure 125 PSI
-Maximum fluid temperature 165� F.
-Inlet port thread 1/2"-14 BSP-F
-Discharge port thread 3/8"-19 BSP-F
-Gauge port 1/8" maximum inlet required
-Flooded pump dimesions 10.4" x 8" x 7.7"
-Crankcase oil capacity 11.8 oz.
-Type:Gas Flanged

  Price: $548.95


Stens 030-011 Gas Flanged Pump General Pump TX1508G8UI

  Stens 030-011 Gas Flanged Pump General Pump TX1508G8UI

Bore:0.591 "
Stroke:0.315 "

REPLACES:
  • GENERAL PUMP TX1508G8UI
  • and others
-Gallons Per Minute:3.0
-Pounds Per Square Inch:3,000
-RPM:3,400
-GHP:9.2
-TX Series 63
-Triplex plunger pump
-Built-in unloader and downstream injector on left side of manifold
-1" hollow shaft
-Flanged for direct couple to gasoline engines
-SAE J609B
-Large, lightweight connecting rods
-New long life low and high pressure seals
-Forged brass manifold with exclusive lifetime warranty
-Maximum inlet pressure 125 PSI
-Maximum fluid temperature 165� F.
-Inlet port thread 1/2"-14 BSP-F
-Discharge port thread 3/8"-19 BSP-F
-Pump dimensions 8.4" x 8.3" x 4.8"
-Maximum inlet required, flooded
-Crankcase oil capacity 14 oz.
-Type:Gas Flanged

  Price: $579.95


Stens 030-015 Gas Flanged Pump General Pump TX1510G8UI

  Stens 030-015 Gas Flanged Pump General Pump TX1510G8UI

Bore:0.591 "
Stroke:0.394 "

REPLACES:
  • GENERAL PUMP TX1510G8UI
  • and others
-Gallons Per Minute:4.0
-Pounds Per Square Inch:3,000
-RPM:3,400
-GHP:12.3
-TX Series 63
-Triplex plunger pump
-Built-in unloader and downstream injector on left side of manifold
-1" hollow shaft
-Flanged for direct couple to gasoline engines
-SAE J609B
-Large, lightweight connecting rods
-New long life low and high pressure seals
-Forged brass manifold with exclusive lifetime warranty
-Maximum inlet pressure 125 PSI
-Maximum fluid temperature 165� F.
-Inlet port thread 1/2"-14 BSP-F
-Discharge port thread 3/8"-19 BSP-F
-Pump dimensions 8.4" x 8.3" x 4.8"
-Maximum inlet required, flooded
-Crankcase oil capacity 14 oz.
-Type:Gas Flanged

  Price: $579.95


Stens 030-019 Gas Flanged Pump General Pump EZ3030G34UI

  Stens 030-019 Gas Flanged Pump General Pump EZ3030G34UI

Bore:0.591 "
Stroke:0.299 "

REPLACES:
  • GENERAL PUMP EZ3030G34UI
  • and others
-Gallons Per Minute:3.0
-Pounds Per Square Inch:3,000
-RPM:3,400
-GHP:10.8
-EZ Series 44
-Triplex plunger pump with hollow shaft
-Flanged for direct couple to gasoline engines
-SAE J609B
-Forged brass manifold with exclusive lifetime warranty
-Flanged for mounting on up to 13 HP engines
-Maximum inlet pressure 125 PSI
-Maximum fluid temperature 165� F
-Inlet port thread 1/2"-14 BSP-F
-Discharge port thread 3/8"-19 BSP-F
-Shaft diameter 1"
-Pump dimensions 8.8" x 9.7" x 6.5"
-Maximum inlet vacuum 3 ft., water (2.6" Hg)
-Crankcase oil capacity 14 oz.
-Type:Gas Flanged

  Price: $679.95


STENS 030-023 GAS FLANGED PUMP

  STENS 030-023 GAS FLANGED PUMP

Bore:0.591 "
Stroke:0.374 "

REPLACES:
  • GENERAL PUMP EZ3040GUI
  • and others
-Gallons Per Minute:4.0
-Pounds Per Square Inch:3,000
-RPM:3,400
-GHP:14.4
-EZ Series 44
-Triplex plunger pump with hollow shaft
-Flanged for direct couple to gasoline engines
-SAE J609B
-Forged brass manifold with exclusive lifetime warranty
-Flanged for mounting on up to 13 HP engines
-Maximum inlet pressure 125 PSI
-Maximum fluid temperature 165� F
-Inlet port thread 1/2"-14 BSP-F
-Discharge port thread 3/8"-19 BSP-F
-Shaft diameter 1"
-Pump dimensions 8.8" x 9.7" x 6.5"
-Maximum inlet vacuum 3 ft., water (2.6" Hg)
-Crankcase oil capacity 14 oz.
-Type:Gas Flanged

  Price: $734.95


Page 7 of 788 | 7874 Results