Go Kart Centrifugal Clutches

16 Products Found

STENS 255-018 COMET SPROCKET CLUTCH for


-Bore:3/4"
-Teeth:12
-Keyway:3/16"
-Chain Number:35

REPLACES:

• COMET 209760
• and others

STENS 255-042 COMET SPROCKET CLUTCH for


-Bore:3/4"
-Teeth:10
-Keyway:3/16"
-Chain Number:40/41

REPLACES:

• COMET 209768
• and others

STENS 255-109 MAXTORQUE SPROCKET CLUTCH for


-Bore:5/8"
-Teeth:12
-Keyway:3/16"
-Chain Number:35
-Sintered metal shoes
-Stainless steel garter spring
-Weldless construction
-Oilite bushing
-No adjustment required
-Non-directional (inboard or outboard)
-Each clutch includes an instruction sheet explaining proper installation methods and maintenance

-Use with our 250-001 Roller Chain #35

STENS 255-117 MAXTORQUE SPROCKET CLUTCH for


-Bore:5/8"
-Teeth:10
-Keyway:3/16"
-Chain Number:41
-Sintered metal shoes
-Stainless steel garter spring
-Weldless construction
-Oilite bushing
-No adjustment required
-Non-directional (inboard or outboard)
-Each clutch includes an instruction sheet explaining proper installation methods and maintenance

-Use with our 250-027 Roller Chain #41

STENS 255-125 MAXTORQUE SPROCKET CLUTCH for


-Bore:3/4"
-Teeth:12
-Keyway:3/16"
-Chain Number:35
-Sintered metal shoes
-Stainless steel garter spring
-Weldless construction
-Oilite bushing
-No adjustment required
-Non-directional (inboard or outboard)

-Use with our 250-001 Roller Chain #35

STENS 255-133 MAXTORQUE SPROCKET CLUTCH for


-Bore:3/4"
-Teeth:10
-Keyway:3/16"
-Chain Number:41
-Sintered metal shoes
-Stainless steel garter spring
-Weldless construction
-Oilite bushing
-No adjustment required
-Non-directional (inboard or outboard)

-Use with our 250-027 Roller Chain #41

STENS 255-190 SPROCKET BUSHING for


- ID:7/8" x OD:1"

STENS 255-220 HILLIARD SPROCKET CLUTCH .750" BORE for


- ID:3/4"
- OD:4 3/16"
- Height:2 9/32"
- Teeth:10
- Chain Number:40/41 chain
- High performance
- Thermodynamic design absorbs heat without damaging springs
- Includes retaining ring
- Maximum 13 HP rating

REPLACES:

• HILLIARD LD4S-4L
• and others

- Use with our 250-019 Roller Chain #40
- Use with our 250-027 Roller Chain #41

STENS 255-224 HILLIARD SPROCKET CLUTCH .750" BORE for


- ID:3/4"
- OD:4 3/16"
- Height:2 9/32"
- Teeth:12
- Chain Number:35
- High performance
- Thermodynamic design absorbs heat without damaging springs
- Includes retaining ring and set screw
- Maximum 13 HP rating

REPLACES:

• HILLIARD LD4-S-5L
• and others

- Uses our 255-228 Hilliard Sprocket Bushing
- Use with our 250-001 Roller Chain #35

Oregon 84-001 Centrifugal Clutch 10T 41Chn 3/4Inch for


Max Torque Clutch
SS Type Automatic Clutch for 4-Cycle Engines.
Six sintered metal shoes engage at 2000 RPM. Stainless steel garter spring, works clockwise or counterclockwise, oilite bearings for long life. Works in oil, dirt and water with proper maintenance. 3/16" Keyway and Allen set screws included.

REPLACES:

• MARTIN WHEEL MT12-10RC41
• and others

Chain: #40 and #41
Teeth: 10
Bore: 3/4"
Keyway: 3/16"

OREGON 84-002 CENTRIFUGAL CLUTCH 11T 35CHN 5/8 INCH for


Max Torque Clutch
SS Type Automatic Clutch for 4-Cycle Engines.
Six sintered metal shoes engage at 2000 RPM. Stainless steel garter spring, works clockwise or counterclockwise, oilite bearings for long life. Works in oil, dirt and water with proper maintenance. 3/16" Keyway and Allen set screws included.

REPLACES:

• MARTIN WHEEL MT10-11RC35
• and others

Oregon 84-004 Centrifugal Clutch 12T 35Chn 3/4Inch for


Max Torque Clutch
SS Type Automatic Clutch for 4-Cycle Engines.
Six sintered metal shoes engage at 2000 RPM. Stainless steel garter spring, works clockwise or counterclockwise, oilite bearings for long life. Works in oil, dirt and water with proper maintenance. 3/16" Keyway and Allen set screws included.

REPLACES:

• MARTIN WHEEL MT12-12RC35
• and others

Chain: #35
Teeth: 12
Bore: 3/4"
Keyway: 3/16"

Oregon 84-007 Centrigual Clutch 10 Teeth, 41 Chain, 5/8" Bore for


Max Torque Clutch
SS Type Automatic Clutch for 4-Cycle Engines.
Six sintered metal shoes engage at 2000 RPM. Stainless steel garter spring, works clockwise or counterclockwise, oilite bearings for long life. Works in oil, dirt and water with proper maintenance. 3/16" Keyway and Allen set screws included.

Chain: #41
Teeth: 10
Bore: 5/8"
Keyway: 3/16"

Oregon 84-011 Centrifugal Clutch 12T 5/8 Bore 35 Chain for


Max Torque Clutch
SS Type Automatic Clutch for 4-Cycle Engines.
Six sintered metal shoes engage at 2000 RPM. Stainless steel garter spring, works clockwise or counterclockwise, oilite bearings for long life. Works in oil, dirt and water with proper maintenance. 3/16" Keyway and Allen set screws included.

Chain: #35
Teeth: 12
Bore: 5/8"
Keyway: 3/16"

OREGON 84-012 CENTRIFUGAL CLUTCH 3/4 IN 12T 35 CHAIN for


Special lube system keeps clutch lubricated, includes grease zerk.

Teeth: 12
Chain Size: #35
Bore: 3/4"

OREGON 84-013 CENTRIFUGAL CLUTCH 3/4 10T 41 CHAIN for


Special lube system keeps clutch lubricated, includes grease zerk.

Teeth: 10
Chain Size: #41
Bore: 3/4"

Showing 16 Products